SEVERIN PG 8138 Stand Grill Instruction Manual

PG 8138 Stand Grill
Instruction Manual

PG 8138 Stand Grill

ART.-NO. PG 8138/PG 8139 SEVO SMART CONTROL GT/GTS

|
---|---

Stand grill / Table-top grill
Dear Customer,
Before using the appliance, read the following instructions carefully and keep this manual for future reference. The appliance must only be used by persons familiar with these instructions.
Familiarisation

1. Grill rack, 2 parts

2. Heating element with junction box

3. Rotary control with display and light-ring

4. Power cord with plug

5. Reflector tray inserts

6. Reflector tray

7. Grill housing with cover

8. Core thermometer, 2 pieces

9. Cable lead for core thermometer (on both sides)
   Models with grill cart:

10. Side storage tables, 2 pieces

11. Grill cart frame

12. Support legs wheel-side, 2 pieces

13. Wheels with wheel axles, 2 pieces each

14. Frame for storage rack

15. Support legs, 2 pieces

16. Storage rack

Not shown:

• 8 bolts, big
• 4 bolts, small with nut
• 2 wheel covers
• 2 cotter pins

Important safety instructions

• The appliance should only be connected to an earthed socket installed in accordance with the regulations.

• The appliance is also designed for outdoor use, and must therefore be operated with an additional earth leakage circuit-breaker with a rated tripping current not exceeding 30mA.

• Make sure that the supply voltage corresponds with the voltage marked on the rating label.

• The power cord should be regularly examined for any signs of damage.
  In the event of such damage being found, the appliance must no longer be used.

• In order to avoid hazards, and to comply with safety requirements, repairs to this electrical appliance or its power cord must be carried out by our customer service. If repairs are needed, please contact our customer service department by phone or email (see appendix).

• Caution: This symbol indicates that the grill rack and heating element may become very hot during operation – there is a danger of burns.

• Before cleaning the grill, ensure it is disconnected from the power supply and has completely cooled down.

• To avoid the risk of electric shock, the heating element with sensor and power cord and the core thermometer must not be immersed in liquid or even allowed to come into contact with it.

• Clean the grill rack, reflector tray and the tray inserts with hot soapy water, or in a dish-washer. For detailed information on cleaning the appliance, please refer to the section Cleaning and care.

• The appliance is not intended to be operated by means of an external timer or separate remote-control system.

• Warning! Do not, under any circumstances, use charcoal or any other solid or liquid fuel to operate the grill.

• Caution: Do not cover the grill rack with aluminium foil, barbecue dishes or other items, as the resulting buildup of heat could seriously damage the grill.

• A maximum of 2 litres of water may be poured into the reflector tray.

• This appliance is intended for domestic or similar applications, such as
  – in staff kitchens in shops, offices and other similar working environments,
  – in agricultural working environments,
  – by customers in hotels, motels etc. and similar establishments,
  – in bed-and breakfast type environments.

• This appliance may be used by children (at least 8 years of age) and by persons with reduced physical, sensory or mental capabilities, or lacking experience and knowledge, provided they have been given supervision or instruction concerning the use of the appliance and fully understand all dangers and safety precautions involved.

• Children must not be permitted to play with the appliance.

• Children must not be permitted to carry out any cleaning or maintenance work on the appliance unless they are supervised and at least 8 years of age.

• The appliance and its power cord must be kept well away from children under 8 at all times.

• Caution: Keep any packaging materials well away from children – these are a potential source of danger, e.g. of suffocation.

• Before the appliance is used, the main body as well as any attachment fitted should be checked thoroughly for any defects. Should the appliance, for instance, have been dropped onto a hard surface, it must no longer be used: even invisible damage may have adverse effects on the operational safety of the appliance.

• During operation, the grill must be placed on a level, heat-resistant surface, impervious to splashes and stains. When grilling food with a high fat or moisture content, splashes are not always avoidable.

• Do not position the grill next to a wall or corner, and ensure that no inflammable materials are stored near it.

• Remember that food with a high fat or moisture content may tend to ignite; therefore always fill the reflector tray with water before use. Do not connect the grill to mains power until the trey has been filled with water. The water helps to cool down the reflector tray, reduces the build-up of smoke, and also facilitates cleaning.

• Keep monitoring the water level. Water should be added in good time, while ensuring that it does not come into contact with the heating element. Caution: Disconnect the grill from the mains before adding water.

• Before the grill is used, always check that the heating element is correctly fitted in the housing and reflector tray.

• The grill must be supervised at all times during operation.

• Do not allow the power cord to touch any hot parts of the appliance.

• Route the power cord in such a way that no one can trip over it.

• Always remove the plug from the wall socket
  – before filling with water,
  – after use,
  – in case of any malfunction, and
  – during cleaning.

• The use of an extension cord or reel causes a loss of power, possibly combined with a subsequent heat buildup in the cable. It is therefore necessary to unwind the cable completely before use. Make sure that the cord is approved for outdoor use and for the power specified (see rating label).

• Do not move the grill cart by pushing at the side table. Take off the side table first and always grip the frame.

• Do not use the grill cart to transport any items.

• Never move the barbecue while it is in operation.

• Remove water after use.

• Caution! Always make sure that the barbecue has cooled down completely before it is moved, cleaned, covered or stored.

• Caution! Whenever the barbecue is not in use, the heating element with the connection box must be removed from the barbecue and stored in a dry space indoors.

• The other parts of the barbecue must not be stored outdoors or in an open area where they could be affected by the weather.

• The grill may only be used with the supplied core thermometer or the SEVERIN item no. ZB 8126.

• No responsibility is accepted if damage results from improper use, or if these instructions are not complied with.

• This product complies with all binding CE labelling directives.

Before using for the first time

• Remove any packaging materials and stickers from the appliance.
• Clean the grill rack, reflector tray and the tray inserts with warm soapy water; wipe thoroughly dry afterwards.
• Assemble the appliance as described in Preparing the unit.
• Let the grill heat up for approximately 10 minutes at maximum power without any food (see ‘Boost-zone’ grilling). This will remove the smell typically encountered when first switching on a grill. A little smoke may be emitted; for that reason, adequate ventilation should be ensured by opening windows or balcony doors; an extractor hood is also suitable.

Grill assembly

• Assemble the grill as shown in the diagrams:
  ∙ Place the reflector tray into the grill housing.
  ∙ Note: Fit the tray inserts so that each insert covers four protrusions.
  ∙ Fit the heating element with junction box into the reflector tray. The appliance is equipped with a safety switch. The unit can be operated only with the junction box properly installed.
  ∙ Fit both grill rack elements so that the studs on the rack fit into the corresponding openings in the reflector tray.

Grill cart assembly

• For grill models with grill cart, assemble the cart as shown in the diagram.
• For assembly, a Phillips screwdriver is needed.
• Prior to assembly, check that all parts are complete as listed in the Familiarisation section.
• Assembly:
  ∙ Place the grill cart frame upside-down on the floor.
  ∙ Insert the four support legs into the housing and secure each support leg with two big bolts. The two support legs with the additional holes for the wheels must be mounted together on the narrow side of the grill cart.
  ∙ Turn the frame with the support legs upright.
  ∙ Fit the plastic frame of the storage rack and secure it on all four support legs, using the corresponding bolts and nuts; then fit the storage rack.
  ∙ Slide the wheel axles through the openings on the support legs and put on the wheels. Secure each wheel with one of the cotter pins and clip on the wheel covers.
  ∙ Fit the side tables onto the corresponding metal pins.
  ∙ Ensure that the grill cart is stable. Check the bolts regularly for firm connection.
  ∙ Place the assembled grill on top.

Caution:

• Do not exceed a maximum load of 3 kg for the side tables, and 20 kg for the storage rack.
• If you need to move the grill, remove the table on the side opposite from the wheels and grip the frame.

Download the App:

• Note: This is a quick guide, which you can use to find out the most important basic information and to learn how to start up the barbecue using the App. There are thorough and complete instructions available on our homepage: www.severin.de-> PG 8139-> Downloads

• App for Android 8
  App for Apple iOS 12

• Download the SEVERIN App from the Apple App Store or the Google Play Store.

• Open the SEVERIN App.

• If you are a first-time user, you will need to register and create a new account. If you already have an account, use your access data to log in.

• Connect your barbecue to a correctly installed and easily accessible power socket with an earth connection.

• Tap on the + in the top right-hand corner and select Smart Product. Then confirm with Set Up.

• Now confirm the connection on the barbecue by pressing the display.

• Next, select your WiFi network and enter the password. Then tap on Connect.

• The appliance is now connected. When the appliance is connected, a WiFi symbol will appear on its display.

• Lastly, you can choose a name for your barbecue.

• Now you are able to use the App to control and configure your appliance.

Preparing the unit

• Assemble the appliance as described in Grill assembly.
  For grill models with grill cart, refer to Grill cart assembly.

• Fill the reflector tray with water to the Max marking (max 2 litres). Do not pour water on the heating element or its sensor.
  Hint!
  During grilling, the water in the reflector tray should be replenished in good time. Caution: Always disconnect the appliance from the mains before re- filling.

• Connect the appliance to the mains.

• The light ring lights up blue, the unit is ready for use.

Rotary control
The rotary control is used for function selection or switching off (Sleep mode).
Turn:
Select the Function/Temperature/Timer.
Push – short:
Confirm the selection.
Push – two seconds:
1 x: return to stand-by mode to change a function
2 x: return to sleep mode
Rotary control – light ring
The light ring indicates the current operating mode:
No light:
The unit is in sleep mode.
Blue light:
The unit is in stand-by mode.
Flashing:
The grill rack has not yet reached the selected temperature.
The unit is heating up or cooling down.
Steady:
The selected temperature has been reached.
Orange:
Grilling at 80-350 °C
Red:
Boost-zone 330-500 °C
Purple:
Indirect grilling at 80-200 °C

Timer
The timer is used to monitor the grilling time. It can be set from 1 min to 23 h 59 mins. Beep signals indicate that the running time has elapsed; the heating element remains switched on.

• Turn the rotary control until lights up.

• Press the rotary control briefly and turn to select the hours.

• Press the rotary control briefly and adjust the minutes.

• Confirm the time setting by briefly pressing the control.
  The colon starts flashing; once the time has elapsed, beep signals are heard.

• To return to stand-by mode, press the rotary control for two seconds.

• Alternatively, set the timer to 0:00, and press the control briefly to return to stand-by mode.

• If the heating is switched off after the timer is set, the appliance will change to sleep-mode 5 minutes after the last input, i.e. the timer is switched off.

• If the timer is set with the heating already off, it will continue until the pre-selected time is reached, when the unit changes to sleep-mode.

Grilling at 80-350°C
To grill sausages, poultry, fish etc. For finishing or keeping warm steaks.
The entire grill surface is heated.

• Turn the rotary control until lights up.
• Press the rotary control briefly and turn to select the desired temperature. Press briefly to confirm.
• The ring starts flashing orange and the appliance is heating up.
• Once the selected temperature has been reached, the ring shows steady orange.
• Place the food on the grill surface.
• Close the cover, if desired.

‘Boost-zone’ grilling 330-500 °C
For searing or light grilling of steaks.
The boost-zone is located to the right; the left side is heated to 330 °C.

• Turn the rotary control until lights up.

• Press the rotary control briefly and turn to select the desired temperature. Press briefly to confirm.

• The ring starts flashing red and the appliance is heating up.

• Once the selected temperature has been reached, the ring shows steady red.

• Place the food on the boost-zone.
  Note:
  Do not close the cover during Boost-zone grilling. The Boost-zone function is automatically de-activated when the cover is closed.

• For subsequent cooking, lower the temperature or shift the food to the left on the grill surface.

Indirect grilling at 80-200°C
For slow cooking, e.g. for roasts or for large steaks that require additional cooking. This means that only the outer area of the grilling surface is heated, creating an indirect grilling zone.

• Turn the control dial until lights up.
• Press the control dial briefly and turn it to set the required temperature. Confirm by pressing briefly.
• The ring flashes purple and the appliance heats up.
• As soon as it reaches the selected temperature, the ring lights up purple continuously.
• Place the food on the grilling surface.
• Now you can close the lid if you wish.

Grilling with the core thermometer

• Scope of supply: 2 items
  Other core thermometers are available under item no. 8126.

• Caution: The core thermometers heat up during use. Use suitable protection, eg barbecue gloves.

• Fit the thermometer plugs into the sockets at the lower left of the junction box . To prevent the appliance from switching off, ensure that the box is not lifted up and stays properly connected.

• Select the desired grill function and temperature.

• Once pre-heating is complete and the ring shows a steady light, put on the food.

• Push the tips of the thermometers into the centre of the food.

• Use the rotary control to set the desired core temperature or . Press briefly to confirm.

• The display shows the respective current core temperature.

• When using the cover during grilling, the core-thermometer cables should be routed through the cable leads on either side of the cover (see diagram 9).

• Once the pre-set core temperature on one thermometer is reached, three long beep signals are heard.

• Remove the respective thermometer and take off the food.

Note:
The grill plate remains on even after the pre-set core temperature has been reached.
Stand-by mode

• To switch off the heating and return to stand-by mode, press the rotary control for two seconds.
• Alternatively, press the control briefly, set the temperature to 00 and press again briefly to return to stand-by mode.

Sleep mode

• If the heating is switched off, the appliance will change to sleep-mode 5 minutes after the last input.
• To switch off earlier, press the rotary control for two seconds.

After grilling

• Always disconnect the unit from the mains and allow it to cool down after grilling.

Cleaning and care

• Ensure that the grill is thoroughly cleaned after use.
• Before cleaning the grill, ensure it is disconnected from the power supply and has completely cooled down.
• Do not use metallic pads or abrasive cleaning agents.
• Remove the grill rack and clean it in a dish-washer or with warm soapy water. To remove persistent food residues, it can be left soaking for a while.
• Remove the heating element. To avoid the risk of electric shock, do not clean the heating element with water and do not immerse it in water. The heating element with junction box may be wiped with a slightly damp lint-free cloth.
• Take off the reflector inserts and tray and clean them in a dish-washer or with warm soapy water. To remove persistent food residues, they can be left soaking for a while.
• The core thermometer tips may be wiped with a moist cloth.
• All other parts can be cleaned with a cloth soaked in soapy water, and should be wiped completely dry afterwards.

Hint!

• To help clean the grill rack, reflector inserts and tray, baking powder may be used. Mix a paste from water and baking powder, rub the paste onto the affected areas and let it take effect for a while. Clean with a soft brush/sponge and rinse thoroughly afterwards.
• For hard-to-remove residues, the grill rack may be first cleaned by burning it out: heat up the grill to 320 °C, close the cover and wait several minutes.

Technical Data

Disposal
Devices marked with this symbol must be disposed of separately from your household waste, as they contain valuable materials which can be recycled. Proper disposal protects the environment and human health. Your local authority or retailer can provide information on the matter.

Declaration of conformity

SEVERIN Elektrogeräte GmbH hereby declares that the radio device type [PG 8139] complies with Directive 2014/53/EU.
The full text of the EU Declaration of Conformity is provided on our homepage: www.severin.de->PG8139->Downloads

SEVERIN Elektrogeräte GmbH
Röhre 27
D-59846 Sundern
Tel +49 2933 982-0
Fax +49 2933 982-1333
information@severin.de
Model specifications are subject to change.
I/M No.: 10103.0000 08/22

References

• SEVERIN Onlineshop
• SEVERIN Onlineshop
• SEVERIN Onlineshop

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>