BRAUN CareStyle 3 Pro Steam Generator Iron Instruction Manual
- June 12, 2024
- Braun
Table of Contents
BRAUN CareStyle 3 Pro Steam Generator Iron Instruction Manual
www.braunhousehold.com/register
Please read safety instructions (separate booklet) carefully and completely before using the appliance.
© Copyright 2023. All rights reserved
De’Longhi Braun Household GmbH
Carl-Ulrich-Straße 4
63263 Neu-Isenburg/Germany
5712870071_01/05.23 IS1511, 1512, 1514 INT
DE/UK/FR/ES/PT/IT/NL/DK/NO/SE/FI/PL/CZ/SK/HU/HR/
SI/TR/RO/MD/GR/KZ/RU/UA/Arab
Filling the water tank
Start into operation
Before first use
Steam settings
Auto-off
Descaling
After ironing / storage
Before use
Please read instructions carefully and completely before using the
appliance.
Description
1 Temperature selector
2 Steam button
3 Temperature control LED
4 Clean LED / button
5 2-in-1 tray: removable iron rest + cleaning vessel
6 Lock system
7 Lock system for 2-in-1 tray
8 Removable water tank
9 Double cord/double cord storage
10 Power cord
11 Heel rest
Intended use
The appliance must be used only for ironing garments which are suitable for ironing according to the care label. Never iron or dampen garments while wearing them.
Filling the water tank
(for details refer to fig. A)
Make sure the appliance is plugged off. If you have extremely hard water, we recommend that you use 50 % tap water and 50 % distilled water. Do not use condensation water from a tumble dryer.
Settings (for details refer to fig. D)
Temperature
Descaling (for details refer to fig. F)
The system will remind you to descale it regularly independent of the type of water used. Descaling can be performed at any time needed even when not indicated by the system.
If the «clean» LED (4) and the acoustic signal turn on during an ironing session, it is possible to continue ironing. There is no need to perform the cleaning immediately. The cleaning procedure can be performed when the ironing session has been finished or next time the appliance is switched on.
If the appliance is switched off without having performed the cleaning process, the «clean» LED and acoustic signal will turn on again when it is next switched on. If there is no steam supply from the iron and the following conditions are present: clean LED “on” , temperature control LED “flashing” and acoustic signal “active” then the cleaning process will be mandatory to perform in order to proceed with the ironing session.
Caution : Do not leave the appliance unattended during the descaling process. Always perform the descaling process with the cleaning vessel. Do not interrupt the process by lifting the iron up from the cleaning vessel, as hot water and steam will come out of the soleplate.
Caution : The cleaning vessel can be hot and contains hot water, take care while moving and emptying it.
Troubleshooting guide
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>