PegPerego IGOR0068 John Deere Ground Loader User Manual
- June 12, 2024
- PegPerego
Table of Contents
- PegPerego IGOR0068 John Deere Ground Loader
- Product Information
- Product Usage Instructions
- IMPORTANT INFORMATION
- DECLARATION OF CONFORMITY
- SAFETY STANDARDS
- BATTERY WARNINGS
- MAINTENANCE AND VEHICLE CARE
- PROBLEMS?
- CUSTOMER SERVICE
- ASSEMBLY INSTRUCTIONS
- How to use the battery charger
- Contacts
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
PegPerego IGOR0068 John Deere Ground Loader
Product Information
- Product Name: John Deere GROUND LOADER
- Product Code: IGOR0048
- Made in: Italy
- Conformity: CE Marked, designed and approved in accordance with applicable European directives.
Compliance Standards
- Directive on the safety of toys 2009/48/EC
- Standard EN 71-1 + EN 71-2
- Standard EN 71-3
- Standard EN 62115
- Directive on the electromagnetic compatibility 1999/5/CE or RED 2014/53/UE
- Standard EN 55014
- Standard EN 55022
- Standard EN 61000
- Standard EN 60825-1 (Safety of laser products)
- Directive on WEEE – RAEE 2003/108/EC
- Directive on batteries and accumulator 2008/103/EC
- Directive on RoHS 2011/65/UE – EN 50581:2012 Reg. (CE) n.1907/2006 (Reach) allegato XVII-51 &52
Note: Not intended for use on public roads.
- Manufacturer: Peg Perego S.p.A.
- Address: via A. De Gasperi, 50, 20862 – Arcore (MB) – ITALY#
Product Usage Instructions
- Read the instruction manual carefully to familiarize yourself with the use of the product and to teach your child how to drive it correctly, safely, and enjoyably.
- Keep the manual for future reference. If you transfer the product to another user, make sure to include the instructions booklet.
- Before using the vehicle for the first time, charge the battery for 18 hours. Failure to do so may cause irreparable damage to the battery.
- Follow the assembly instructions provided in the manual.
Thank you for choosing a PEG PEREGO® product. For over 70 years PEG PEREGO have been with you as you take your children out – in carriages just after they are born, then in strollers, and later on in pedal and battery-powered toys. Discover our complete range of products, news and other information about the Peg Perego world on our website. www.pegperego.com
Peg Perego S.p.A is a company whose quality management system is certified by TÜV Italia Srl, in compliance with the ISO 9001 standard. This certification is a guarantee for customers and consumers of the transparency and trustworthiness of the company’s procedures and working methods.
IMPORTANT INFORMATION
Read this instruction manual carefully to learn how to use the vehicle and teach your child to drive it properly and safely while enjoying it at the same time. Keep the manual safe for future reference. If you transfer this product to another user, make sure to include this instructions booklet. Before using the vehicle for the first time, charge the battery for 18 hours. Failure to do this could result in irreparable damage to the battery.
- Ages 3+
- Maximum allowable weight 40 kg
- Single seat vehicle
- One 12V 8Ah sealed lead acid rechargeable battery
- Two drive wheels
- Two 165 W motors
- Speed in 1st gear 3,5 km/h
- Speed in 2nd gear 7,3 km/h
- Speed in reverse gear 3,4 km/h
Do not exceed the maximum allowable weight of 40 kg. This limit includes both the occupant and the load (if any). Peg Perego reserve the right to make changes to the models and information in the present publication at any time, for technical or company reasons.
DECLARATION OF CONFORMITY
A CE marked product, designed and type-approved in compliance with the applicable EU directives, intended for the markets and countries implementing such standards.
PRODUCT NAME
- John Deere GROUND LOADER
PRODUCT IDENTIFICATION CODE
- IGOR0048
REFERENCE STANDARD (origin)
- Directive on the safety of toys 2009/48/EC
- Standard EN 71-1 + EN 71-2
- Standard EN 71-3
- Standard EN 62115
Directive on the electromagnetic compatibility
- 1999/5/CE or RED 2014/53/UE
- Standard EN 55014
- Standard EN 55022
- Standard EN 61000
EN 60825-1 – Safety of laser products
- Directive on WEEE – RAEE 2003/108/EC
- Directive on batteries and accumulator 2008/103/EC Directive on RoHS 2011/65/UE – EN 50581:2012 Reg. (CE) n.1907/2006 (Reach) allegato XVII-51 &52 phthalates in toys
The vehicle is not compliant with the requirements of road transport standards and consequently cannot travel on public roads.
DECLARATION of CONFORMITY
Peg Perego S.p.A. declares under its own responsibility that the item in question has been subjected to internal operational tests and approved according to the standards in force at external, independent laboratories.
PLACE AND DATE OF ISSUE
- Italy – 02. 06. 2016
- Peg Perego S.p.A.
- via A. De Gasperi, 50
- 20862 – Arcore (MB) – ITALIA
SAFETY STANDARDS
Our toys are compliant with European Safety Standards for toys (safety requirements stipulated by the EEC Council) and with the “U.S. Consumer Toy Safety Specification”. They are also certified by notified toy safety bodies in accordance with Directive 2009/48/EC. They are not compliant with the requirements of road transport standards and consequently cannot travel on public roads.
- WARNING: This toy is unsuitable for children under 3 years due to its maximum speed.
- WARNING: Not suitable for children under the age of 36 months. The small parts may be swallowed or inhaled, leading to suffocation.
- WARNING: Protective equipment should be worn. Not to be used in traffic.
- WARNING: DO NOT, UNDER ANY CIRCUMSTANCE, use this toy on public roads.
- WARNING: Using the vehicle on public roads, in narrow spaces or near watercourses and swimming pools may cause injury to the users and/or third parties. Adult supervision is always necessary.
- Children must always wear shoes when using the vehicle.
- When the vehicle is in operation make sure that children do not put their hands, feet, other body parts, clothing, or other objects close to the moving parts.
- Never wet sensitive vehicle components like the motors, electrical systems, buttons, etc.
- Do not use petrol or other flammable substances close to the vehicle.
- The vehicle must be only be used by a single child unless it is classed as a two-seater vehicle.
WEEE DIRECTIVE (EU only)
- At the end of its useful life, this product is classed as Waste Electrical and Electronic Equipment (WEEE) and must therefore not be disposed of as urban waste but instead taken to a designated separated waste collection facility.
- Take it to an appropriate collection centre.
- The presence of dangerous substances contained in the electrical components of this product represents a potential source of danger to human health and for the environment if the products are not disposed of correctly.
- The barred dustbin symbol indicates that the product must undergo sorted waste collection.
DISPOSAL OF THE BATTERY
- Help protect the environment.
- Used batteries must not be disposed of with domestic waste.
- They can be left at a used battery or special waste collection centre. Contact your local authorities for more information.
1,5 VOLT – LR44 BATTERY WARNINGS
The insertion of the batteries must be carried out and supervised by adults only. Do not allow children to play with the batteries.
- The batteries must be replaced by an adult.
- Only use the battery type specified by the manufacturer.
- Respect the +/- polarity.
- Do not short circuit the power supply terminals: risk of fire or explosion.
- Always remove the batteries when the toy is not used for a long time.
- Do not throw the batteries into a fire.
- Never try to recharge batteries if they are not rechargeable.
- Do not mix old and new batteries.
- Remove flat batteries.
- Dispose of flat batteries in the appropriate recycling containers.
BATTERY WARNINGS
- Battery charging must be carried out and supervised by adults only.
- Do not allow children to play with the battery.
CHARGING THE BATTERY
- Charge the battery according to the instructions enclosed with the battery charger and never for more than 24 hours.
- To avoid damage, the battery should be charged as soon as the vehicle starts to lose speed.
- If the vehicle is left unused for a long time, remember to charge the battery and to keep it disconnected from the electrical system. Repeat the recharge procedure at least once every three months.
- The battery must not be charged upside-down.
- Do not forget about the battery which is being charged! Check it from time to time.
- Only use the battery charger provided and the original PEG PEREGO battery.
- The battery is sealed and does not require maintenance.
- Do not remove the battery charger from the socket by pulling the cable.
- Do not move the toy by pulling the battery charger cable.
- Do not cover the battery charger cable, as this would cause it to overheat.
- Do not place the cable and/or battery on hot surfaces.
- Take care on how and where you wrap the cable to so as not to damage it or compromise its operation.
WARNING
- THE BATTERY CONTAINS CORROSIVE TOXIC SUBSTANCES. DO NOT TAMPER WITH IT.
- The battery contains acid-based electrolytes.
- Do not create direct contact between the battery terminals, avoid strong impacts: risk of explosion and/or fire.
- While charging, the battery produces gas. Charge the battery in a well-ventilated environment, away from sources of heat and flammable materials.
- The flat battery must be removed from the vehicle.
- It is not advisable to bring the battery into contact with clothes, as it could damage them.
- Only use batteries or accumulators of the recommended kind.
IF THERE IS A BATTERY LEAK
- Protect your eyes. Avoid direct contact with the electrolyte. Protect your hands.
- Put the battery in a plastic bag and follow the instructions for battery disposal.
IF SKIN OR EYES COME INTO CONTACT WITH THE ELECTROLYTE
- Thoroughly rinse the area concerned with running water.
- Consult a doctor immediately.
- IF THE ELECTROLYTE IS SWALLOWED
- Rinse the mouth and spit out the water. Consult a doctor immediately.
MAINTENANCE AND VEHICLE CARE
- Do not disassemble or try to repair the vehicle on your own. Contact an authorised Peg Perego customer support centre.
- The toy should not be left anywhere with a temperature below 0°C. If it were to be used without being warmed up to a temperature above 0°C, irreversible damage could be caused to the motors and batteries.
- Check the condition of the vehicle regularly, paying particular attention to the electrical system, the plug connections, the terminal protectors and the battery charger. If defects are identified, the electrical vehicle and the battery charger must not be used.
- Always disconnect the battery charger from the toy before carrying out cleaning, maintenance, or any type of intervention.
- For repairs use only original PEG PEREGO spare parts.
- PEG PEREGO do not accept any responsibility for cases of tampering with the electrical system.
- Do not leave the batteries or the vehicle close to sources of heat like radiators, fireplaces, etc.
- Protect the vehicle from water, rain, snow, etc. Using the vehicle on sand or mud may damage the buttons, motors and gears.
- Lubricate moving parts like bearings, steering, etc. periodically with light oil.
- The vehicle surfaces can be cleaned with a damp cloth and, if necessary, with non-abrasive domestic cleaning products.
- Cleaning must only be carried out by adults.
- Never dismantle the vehicle mechanisms or motors, unless authorized by PEG PEREGO.
RULES FOR SAFE DRIVING
For the safety of the child, before starting up the vehicle read and carefully follow the following instructions.
- Teach the child how to use the vehicle properly for safe and enjoyable driving.
- The toy must be used with caution, as it requires substantial dexterity in order to avoid falls or collisions which could cause injuries to the user or third parties.
- Before starting, check that there are no people or objects obstructing the vehicle’s path.
- Drive with hands on the handlebars/steering wheel and always watch the road ahead.
- Brake in good time to avoid collisions.
ATTENTION: The item is equipped with a brake system which needs to be appropriately illustrated to the child by an adult.
2nd GEAR (if present)
- Initially, use in 1st gear is recommended. Before enabling 2nd gear, check that the child has learned to use the handlebars/steering wheel, 1st gear and the brake correctly, and has become familiar with the vehicle.
WARNING
- Check that all the wheel fixing studs/nuts are fastened properly.
- If the vehicle is overloaded, as can happen on soft sand, mud, or very uneven ground, the overload switch will immediately disconnect the power. The power supply will be restored after a few seconds.
UNINTERRUPTED FUN: Keep a spare set of charged batteries ready for use.
PROBLEMS?
- THE VEHICLE DOES NOT WORK?
- Check that there are no disconnected cables under the accelerator plate.
- Check the operation of the accelerator button and replace it if necessary.
- Check that the battery is connected to the electrical system.
- THE VEHICLE LACKS POWER?
- Charge the batteries. If after charging the problem persists, have the battery and charger checked by an assistance centre.
CUSTOMER SERVICE
- PEG PEREGO offers an after-sales assistance service, directly or through a network of authorized assistance centres, for any repairs or replacements and the sale of original spare parts.
- To contact a service center, visit our website: http://www.pegperego.com
- The item’s serial number must always be quoted.
- Refer to the last illustration in this manual to find the serial number.
ASSEMBLY INSTRUCTIONS
SERIAL NUMBER
WARNING
- ASSEMBLY MUST ONLY BE CARRIED OUT BY ADULTS. TAKE CARE WHEN REMOVING THE VEHICLE FROM ITS PACKAGING. ALL THE SCREWS AND SMALL PARTS ARE CONTAINED IN A BAG INSIDE THE PACKAGING. THE BATTERY MAY ALREADY BE FITTED INSIDE THE ITEM.
- Do not use the toy if you find it damaged after opening the packaging. Contact the shop where you bought it or the customer support centre.
- Take care in the presence of children while assembling the toy, given the risks caused by small parts (ingestion hazard) and the plastic bags that contain them (choking hazard).
- To assemble the toy, you will need a flat-head screwdriver, a Phillips screwdriver, a hammer, and a pair of pliers.
ASSEMBLY
- Place the green counterweight on the front of the tractor chassis: the bushes on the chassis should pass through the holes in the counterweight. Slot the lower part of the counterweight onto the chassis.
- Fasten the counterweight with the two screws.
- Fit the 2 side inserts of the bonnet in their respective slots in the chassis, as shown in the figure.
- Position the hood by inserting the hinge into the seat of the chassis provided (1). Then screw down the hinge (2). Close the hood and use a coin to lock the safety catch (3).
- Press the two central headlights into place, paying attention to the 3 corresponding tabs.
- Install the two remaining side headlights, again paying attention to the corresponding tabs.
- Attention: The central headlights and side headlights are not identical: check that the orientation and shape match before pressing them into place.
- Press the side inserts onto the chassis.
- Unscrew the knobs situated under the seat.
- Place the seat in line with the holes of the seat support.
- The seat is adjustable in 2 positions depending on the height of the child (see figure).
- Once the seat is in place, screw the 2 locking knobs back on.
- Insert the front tabs of the seat support into the slots of the chassis.
- Reposition the seat support onto the tractor chassis and screw the 2 screws back on.
- Put the stickers to the back lights position as shown in the figure.
- Attach the lights from bottom to top.
- Install the two caps into the “C” points on the right and left back wheel arches.
- Insert two AA 1.5V batteries into the radio, opening the rear cover (see figure).
- Put the radio in place by inserting the two clips into the chassis under the steering wheel shaft, fixing it with a screw as shown in the figure.
- Press the ring onto the underside of the steering wheel and the cap.
- Push the steering wheel shaft from under the tractor up until it emerges from the top of the chassis.
- Hold the shaft in this position and insert the steering wheel.
- Fix the steering wheel with the bolt and nut provided, taking care to insert the bolt into the round hole and the nut into the hexagonal one.
- Press the hubcaps onto the wheels; the larger ones go onto the front wheels, the smaller ones onto the rear wheels.
- Overturn the bucket as shown in the figure. Remove the elastic on the loader arm with lever; then insert the arm spring into the corresponding point on the bucket.
- Slide a washer onto the screw and insert it into the corresponding holes to connect the bucket to the loader arm. Slide a second washer onto the screw, then insert the nut. Tighten with a screwdriver and pliers. Repeat on the opposite side.
- Install one of the two cross pieces onto the front part of the loader arms, as shown in the figure.
- Fix with the two screws provided (one for each side).
- Insert the second cross piece onto the rear part of the loader arms.
- Fix with the two screws provided (one for each side).
- Put the handle in place as shown in the figure; the picture in box A shows the CORRECT position of the lower tab, which should be inserted into the slot of the loader arm; the picture in box B shows the INCORRECT position.
- Insert a nut into the hexagonal hole on the inner part of the handle. Insert a screw onto the opposite side.
- Fix the handle into place by tightening the screws. Repeat on the opposite side.
- Insert a stud into the cavity on the right side of the bucket, lining up the respective holes.
- Remove the elastic tying the metal tension rod to the lever.
- Place the control lever of the loader vertically and, pressing hard, attach the tension rod to the bucket.
- Place the loader onto the tractor.
- Fix the rear part of the loader, as shown in the figure.
- Insert a large washer into the conical washer bearing as shown in the picture. Put the iron pin into place, and with the help of a hammer, insert it into the washer.
- Line up the loader holes with those of the cab and insert the pin.
- Place a stud on the opposite side of the pin, without using any tools.
- Complete the attachment of the pin using the 2 washer bearings provided, pressing the 2 parts hard and simultaneously. Apply the stickers.
- To open the battery compartment, lower the handle completely, detach it and rotate the black pin of the cab by 180° and lift.
- Connect the battery plug to that of the system. Close the battery compartment, taking care that the side parts of the cab are on the outside, and secure by turning the black pin by 180°. The vehicle is ready for use.
FEATURES AND INSTRUCTIONS FOR USE
- GEAR SHIFT LEVER. The vehicle has three speeds. ATTENTION: when it is removed from the packaging, the vehicle only travels in first gear and in reverse. To use 2nd gear, see figure 45.
- Remove the screw in the second gear lock (fig. A). Turn the lock to the next position (fig. B). Screw the lock back on. All gears are now available.
- ACCELERATOR PEDAL/ELECTRIC BRAKE. The brake will automatically be applied when the foot is lifted off the pedal.
- FM RADIO: To switch on, off and adjust the volume turn knob A. To select the radio stations press the two triangular buttons (see figure).
- LOADER: To lower the loader, push the handle forward as far as it will go.
- To raise the loader, pull back the handle and lock into place.
- To turn the bucket forward, pull back the side lever. Release the lever to return the bucket to the starting position.
REPLACING THE BATTERY
PLEASE NOTE: THE PICTURES OF THE BATTERIES ARE FOR ILLUSTRATIVE PURPOSES ONLY. YOUR BATTERY MAY BE DIFFERENT FROM THE MODEL SHOWN. THIS DOES NOT AFFECT THE REPLACEMENT AND CHARGING PROCEDURES DESCRIBED.
- Open the battery compartment, as shown in before. Disconnect the battery power plugs.
- Unscrew the two screws of the battery holder and remove it as shown in the figure. Extract the battery.
- If you possess or have purchased a 12V/12Ah Peg Perego battery, you should remove the plastic filler (A) by slipping it off the battery holder.
- Put the new battery into place with the battery holder, taking care to insert it sideways into the false motors housing; fix the battery holder in place with the two screws.
- Connect the battery and electrical system plugs. Close the hood by repositioning the lock, as shown before.
CHARGING THE BATTERY
_ WARNING: _BATTERY CHARGING AND EVERY OTHER OPERATION ON THE ELECTRICAL SYSTEM MUST BE CARRIED OUT BY ADULTS ONLY. THE BATTERY CAN ALSO BE CHARGED WITHOUT REMOVING IT FROM THE TOY.
- Insert the battery charger plug in a domestic power socket in accordance with the instructions enclosed with it. Connect plug B with the battery charger plug C. When the battery is charged, remove the battery charger from the domestic socket, then disconnect plug C from plug B.
- Fully insert plug B into plug A, ensuring that they click together. Insert the battery holder. Once finished, always remember to close and lock the lid of the battery compartment.
How to use the battery charger
WARNING
- Insert only lead acid batteries supplied by PEG PEREGO.
- Do not use with non-rechargeable batteries. Risk of explosion.
- For adult use only. It is not a toy. This appliance is not intended for use by infirm persons unless they are being adequately supervised by a responsible person to ensure that they can use the appliance safely.
- Do not use with damaged sheathing, cable or connector.
- Charge the battery only in a well ventilated area.
- Do not remove the plug by pulling on the cable.
- Do not drag the vehicle along on its wheels by pulling the battery charger’s cable.
- Avoid overheating the cable by covering it and do not rest it on hot surfaces.
- Be aware of how the output cable is wound to prevent damaging it.
- Should the battery charger be damaged, do not use it until it is fully repaired.
- The product contains some elements that are considered harmful to the environment. Disposal of these elements or of the entire product at the end of its life should be in accordance with the regulations in force in the country where it is used.
- Before using the battery charger make sure that it is fitted with the specific plug for the country in which it is going to be used.
- Children should not play with the battery charger as IT IS NOT A TOY.
LED INDICATORS
Peg Perego Battery NOT connected
- STEADY LIGHT: battery charger is operating when plugged into the power outlet, ready for charging.
Peg Perego Battery connected
- STEADY LIGHT: battery charged
- FLASHING LIGHT: battery loading
CHARGING THE BATTERIES
WARNING: Before using the toy, charge the battery for at least 18 hours.
- Plug the battery charger into a power outlet that complies with the specifications on its label
- Connect the terminal on the battery charger to that on the battery, using the appropriate connectors.
- Your battery charger is provided with an LED indicator which means that:
- When plugging in the charger as described in A) with no battery connected, the LED will light up to indicate that the device is working correctly.
- Connect the battery as described in section B). If everything is connected correctly and the battery is flat, the LED will start blinking, indicating that it is charging. Wait until the battery is fully charged.
- When the battery is fully charged, the LED will stop blinking. A steady LED indicates that the battery is now fully charged.
- If the battery is already charged, the LED will be steady. If during the next use, the battery doesn’t last long, contact the customer service to verify whether the battery and battery charger are working properly.
- Once the charge is completed and the LED is on, unplug the battery charger from the mains outlet first,then the battery terminal. Connect the battery to the electrical system of your toy, which is now ready to use.
The battery charger is fitted with a safety device which means that in the event of overheating or a short circuit of the battery, a protection system will intervene to prevent current peaks, which could damage the battery charger. In this case unplug the battery charger from the power outlet, remove the cause of the short circuit and reconnect everything as described in sections A) to C).
Contacts
PEG PEREGO U.S.A Inc.
- 3625 INDEPENDENCE Dr. FORT WAYNE IN 46808
- phone: 260·4828191
- fax: 260·4842940
- call us toll free: 1·800·728·2108
- 1·800·225·1558
PEG PEREGO CANADA Inc.
- 585 GRANITE COURT PICKERING ONT. CANADA L1W3K1
- phone: 905·8393371 fax 905·8399542
- call us toll free: 1·800·661·5050
All of the intellectual property rights for the contents of this instruction manual belong to PEG PEREGO S.p.A. and are protected by the laws in force.
References
- Yli 50000 tuotteen valikoima - IKH
- Maki A/S - The largest distributor of toys in nordic countries
- Homepage