walk W401W TWS Earbuds User Manual

W401W TWS Earbuds
User Manual

To avoid possible hearing damage, limit the time listening at high volumes.

SPECIFICATIONS

The W401 True Wireless Ear Buds wirelessly connect to your Smartphone. You can connect one single ear bud, or together as a pair.

Rechargeable Charging Case : 300 mAh (Battery Included)
Standby Time:| UpTOP 180 Hours
Call / Play Time:| 12-15 Hours

*Total time includes both ear buds & charging case

PAIRING

Pairing One Ear Bud

• Remove one Ear Bud from the charging case.
• The single ear bud will power on automatically. A LED light will flash red & blue alternately.
• On your device, go to the Bluetooth settings and select ‘W401’.
• A notification will confirm that your Smartphone is connected to the Ear Bud.

Pairing Two Ear Buds

• Take out both Ear Buds from the charging case. They will power on and pair to each other automatically.
• When the LED light in one Ear Bud turns off, and the LED light of the other Ear Bud is still flashing, this means both Ear Buds are paired to each other.
• On your device, go to the Bluetooth settings and select ‘W401’. Your device will connect to the paired Ear Buds.

USING THE EAR BUDS

MAKING PHONE CALLS

• To answer an incoming call, press the Multi-Function button ONCE.
• When you have finished your call, press the Multi-Function button once.
• To reject an incoming call, long press the Multi-Function button.

MUSIC CONTROL

• When listening to music, tap either Multi-Function button once to pause the music playback.
• To resume music playback, tap either Multi-Function button once.
• To increase the playback volume, tap the Multi-Function button on the RIGHT ear bud three times.
• To decrease the playback volume, tap the Multi-Function button on the LEFT ear bud three times.
• To go to the next track, tap the Multi-Function button on the RIGHT ear bud two times.
• To go back a track, tap the Multi-Function button on the LEFT ear bud two times.

CHARGING

• When the Ear Bud’s battery is low, a notification sound will play to alert the low battery status. A flashing red LED will also notify the low battery level.
• To charge, place the Ear Buds inside the Charging Case.
• The LED Indicator will advise the charging process.
• To charge the Charging Case, connect the Micro USB charging cable to the port on the back of the Charging Case.

VOICE ASSISTANT FUNCTION:

• Long press the Multi-Function button to activate the Smartphone’s voice assistant.
• A notification will confirm that the voice assistant is active and awaiting your commands.
• You can use the Ear Bud’s built in microphone to issue the voice commands directly to your Smartphone.

WARNING

1. Keep Ear Buds and Charging Case from liquids and high temperatures.
2. Keep Ear Buds away from other frequency transmitting devices to prevent interruption of music playback.
3. For optimum playback experience, keep working range between the Ear Buds and your device to under 10 Metres. Also, avoid any obstacles between the Ear Buds and your device.

product Model: W401W PMN: TWS earbuds

FCC statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause u desired operation.

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by tuming the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an cutiet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device and its antenna(s) must not be corticated or operation in conjunction with any other antenna or transmitter.
Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement in portable exposure condition without restriction.
ISED statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian information on RF exposure and compliance.
This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment.
The device has been evaluated to meet general RF exposure requirement. This equipment should be installed and operated with minimum distance Ohm between the radiator & your body.

Imported By:
Walk Investments Limited
LS27 7JQ

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>