Walk AUDIO W203 True Wireless Bluetooth Earphones User Manual
- October 30, 2023
- Walk AUDIO
Table of Contents
W203 True Wireless Bluetooth Earphones
Product Information
- Product Name: Earphones
- Model: VS.3+EDR
- Technology: True Wireless Stereo (TWS)
Product Usage Instructions
-
Ensure that the earphones are fully charged before use.
-
Turn on the Bluetooth on your device and search for available Bluetooth devices.
-
Select the ‘VS.3+EDR’ model from the list of available devices.
-
Once connected, you can use the earphones to listen to music or
take phone calls. -
To adjust the volume, press the volume up or down buttons on the earphones.
-
To skip to the next track, double-tap the right earphone.
-
To go back to the previous track, double-tap the left earphone.
-
To pause or resume playback, press the multi-function button on either earphone.
-
To turn off the earphones, press and hold the multi-function button on either earphone until the LED light turns off.
Specifications
Real wireless connection (TWS) to realize wireless stereo, left and right channel separation, HIFI sound .Left and right ear are complete with Bluetooth function, can bused alone, also can be used in pairs.
- Version: Bluetooth V5.3, Ultra low power Wireless consumption
- Wireless profile: A2DP1.3/HFP1.6/HSP1.2 /AVRCP1.6/D11.3
- Frequency: 2.4GHZ
- Working range: About 10M Battery capacity Internal 40 mah rechargeable Li-ion battery
- Standby time: About 100hrs if one earbud on, 60hrs if both earbuds on
- Continuous: Using one earbud:4-5hrs Using both earbuds:3-4krs
- Working time: (Support incoming call number, ISO system power display)
Bluetooth pairing
- Single-ear connection: take out the earbud and start it automatically in the champing mode. Long press the multi-function button to start it. At this time red and blue lights flashing alternately, open the mobile phone Bluetooth can search for connection, also support other any Bluetooth device in connecting to listen to music or dial the phone.
- Ears(TWS) connection: in the charging mode, take out the left and right earbuds and start them automatically. Double-click to set one side as the host then the left and right earbud will automatically pair up The red and blue light of the main engine will flash alternately and the blue light of the secondary engine will flash once for five seconds, which means that the two machines are paired successfully.
Note that the call is only valid on the host. Shutdown, playback, and pause can be controlled by the multi-function key on one earbud, the other earbud will be controlled synchronously. The next boot automatically completes the pairing connection,
Bluetooth usage
First: call, answer, hang up
- When one earbud is connecting a phone, double click or long press the multifunction button for 1.5 seconds to activate Siri to make a call.
- When two earbuds reconnecting phone, long press the multifunction button for 1.5 seconds to activate Siri to make a call.
- Press the multifunction key once to answer/hang up.
Second : listen to music
- In single connection state: press the multifunction key music once to pause or play, and press the multifunction key three times to change the next song.
- In double connection state:
- R side double click on the multifunction key for volume plus, fast press the multifunction key three times for the next song;
- L side double click on the multifunction key for volume down, fast press the multifunction key three times for the last song.
Third: power off Put the ear buds into the charging bin will automatically shutdown and enter the charging mode or long press multifunction key off.
Fourth: charge When a earbud is at a low power level, it will be prompted by voice and accompanied by red light flashing slowly. When it is put into the charging bin, it will automatically identify charging. When charging, the red light will always be on, and when it is fully charged, the red light will turn to blue light and then turn off.
Matters needing attention
- Do not violence to this product, do not use heavy objects to squeeze, away from high temperature and humidity environment.
- Stay a way from WI-FI, routers and other high frequency transmitting equipment, which will affect the reception of the signal of the unit, causing sound jamming and disconnection
- Please use this product in the effective environment (10 meters), and there should be no physical barrier between the Bluetooth device and the headset (such as the wall, etc.).
Compatible with
IOS &And avoid devices
Note: this product can be connected with any Bluetooth device.
FCC Warning
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
ISED Warning
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device.
NOTE: This equipment has been tested and found to
The device has been evaluated to meet general RF exposure requirement. The device can be used installed and operated with minimum distance 0mm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>