Audvoi SR190AD Wall Mountable SoundBar Instruction Manual

Audvoi SR190AD Wall Mountable SoundBar

Getting to know your Soundbar

You II be up and running in no time

Ready? Let’s begin …

• Please read these instructions carefully. They contain important information which will help you get the best from your Soundbar and ensure safe and correct installation and operation.
• If you require any further assistance, our technical experts are happy to help. For full details, refer to the product support section at the end of these instructions.

Accessories

1. Remote Control
2. AUX to RCA Cable
3. Optical Cable
4. Power Adapter
5. 2 x Rawl plugs and Screws ( for wall mounting)
6. 2 x Wall Mount Kit

Fig 2. Right-hand end

Fig 3. Back

1. Press 0.Ss: Power on
   Press 3s: Power off
   Short press: Switch source (HDMI, Optical, Bluetooth, AUX, USB)

2. Volume+

3. Volume-

4. Short press: Play or Pause
   Long Press: Bluetooth Pairing

5. Power Input Port

6. Subwoofer Input Port

7. USB Input Port

8. AUX Input Port

9. Optical Input Port

10. HDMI ARC Input Port

REMOTE CONTROL

1. Short press: Power on
   Long press: Power off

2. Mute

3. Audio source: Bluetooth

4. Audio source: Optical

5. Audio source: HDMI ARC

6. Audio source: Aux-in

7. Audio source: USB

8. EQ setting: Music

9. EQ setting: Movie

10. EQ setting: Bass

11. EQ setting: News

12. EQ setting: Game

13. Increase bass

14. Decrease bass

15. Short press: 3D effect ON/OFF
    Long press: LED display ON/OFF

Optical Mode

Fig 5.

• STEP 1: Remove the white protective caps from the ends of the optical cable.
• STEP 2: Fully insert the optical cable into Soundbar and TV until you hear a ‘click’.
• STEP 3: Short press and switch the Soundbar audio source to Optical mode.
• STEP 4: Set TV audio format to PCM. Set TV sound mode to Fixed or Standard.
• STEP 5: Restart TV.

Note: Soundbar may not be able to decode all digital audio formats from TVs. In this case, Soundbar will mute. This is NOT a defect. Please try other devices.

Aux to RCA Mode

Fig 6.

• STEP 1: Ensure the Red/White RCA port on your TV is labeled “AUDIO OUT”.
• STEP 2: Ensure the Soundbar Red/White end connects to the TV ‘Audio Output’ socket. Note: NOT’Audio input;’ Video; ‘Video/Audio dual function’ or ANY other label!!
• STEP 3: Short press and switch the Soundbar audio source to Aux mode.
• STEP 4: To gain optimal volume levels, adjust the volume level on both the TV and the Soundbar.

Aux In Mode

Fig 7.

• STEP 1: Connect Soundbar and your secondary device via 3.5mm audio cable (not supplied). STEP 2: Short press C!>/M and switch the Soundbar audio source to Aux In mode.
• STEP 3: Press the Play button on your secondary device to start playback through the Soundbar. STEP 4: To gain optimal volume levels, adjust the volume level on both the secondary device and on the Soundbar.

Bluetooth Mode

Fig 8.

• STEP 1: Long press and switch the Soundbar audio source to Bluetooth mode.

• STEP 2: Short press to start pairing.be will flash quickly when it is discoverable.

• STEP 3: When found, the Soundbar will be displayed as ‘Audvoi ‘. Select the device name to begin pairing.
  Note: If your device requests a password, please enter it to complete the device pairing.

• STEP 4: When pairing is complete, a tone will sound and will change to be continuously on (not flashing).
  Note: Some TV Bluetooth is set to connect with another device such as consoles, not for Soundbars.

HDMI Mode

Fig 9.

• STEP 1: Ensure the HDMI cable is connected to the TV HDMI ARC’ socket.
  Note: NOT’HDMl’socket. Must be’HDMI ARC’ socket.

• STEP 2: Short press and switch the Soundbar audio source to HDMI mode.

• STEP 3: Set TV audio format to PCM. Set TV sound mode to Fixed or Standard.

• STEP 4: Restart TV.

Bass or Treble enhancement

The Bass and Treble settings each range from-5 to +5.

• Press and release the Bass or Treble +or-button on the remote control to adjust the Bass or Treble as appropriate.

Note: The Bass and Treble will have no effect when you are using the EQ Movie setting.

Equaliser (EQ)

There are 5 EQ settings available on your Soundbar. These are Music”, Movie, Bass, News, and Games. Music is the default setting and your Soundbar will be set to this when you first use your product.

• Press and release the relevant ‘Music; ‘Movie; ‘Bass; ‘News’ or ‘Game’ EQ button on the remote control, as required.

Wall mounting your Soundbar

You can wall mount your Soundbar. You will need:

• 2 x rawl plugs of a type and size that are suitable for the wall that you will hang the Soundbar on. 2 rawl plugs have been supplied but please check that these are suitable for the wall surface that you will use.
• 2 x screws that are the correct size for the rawl plugs. 2 screws have been supplied which are the correct size for the rawl plugs provided, but you will need to check that they will be sufficient for the wall surface that you will use.
  You will also need to check that the screw heads fit and hold well into the wall mount points on the back of the Soundbar.

Notes: Make sure that the screws and rawl plugs you use are suitable for supporting the Soundbar. To avoid damage to the Soundbar and personal injury, you should get a qualified person to drill the fixing surface and fit the appropriate wall fixings. When drilling into walls, always check that there are no hidden wires or pipes, etc.  Before wall mounting your product, check the wall strength. If this is not clear, then consult relevant qualified personnel.

Take care not to allow the Soundbar to fall whilst attempting to hook it onto the screws you have fitted to hang the product onto.

1. Align the Soundbar in your chosen location and use a pencil to mark the drilling positions of 10.6 inches or 270 mm apart (Fig 12).

2. Drill the holes as marked in point 1 above.

3. Push 2 raw plugs into the holes. Insert 2 screws into the holes and tighten. Take care to leave enough space between the screw heads and the wall.
   Note: You will need to ensure that the screws head can fit into the wall mount points on the back of your Soundbar and that they are long enough to sufficiently grip into the raw plugs and wall. You must also leave enough space between the screw head and tne wall for the screw head to fit into the mounts.

4. Hang the Soundbar onto the screws. For secure mounting ensure the screw heads slide firmly into the narrow part of the wall mount fixings on the back of the Soundbar.

Warranty

Audvoi warrants this device for 6 months from the date of the original purchase. If you have any issues with your purchase, please contact [email protected]. We’ll be sure to respond within 12 hrs! According to our records, 98% of customers are content with our solutions. We’ll appreciate if you are willing to contact us to solve the problem instead of returning directly. It’s our mission to improve our product and benefit every customer.

How to extend your warranty?

Other information

Helpful technical information

Technical specification

Output: 24V=2.5A

Power consumption| l00W
Standby power consumption| <l W
Full-range speaker drivers| Soundbar: 2.25″ x 4 pcs Sub woofer : 5.25″ x 1pcs
Dimensions| Soundbar: 8108266mm Subwoofer: 220120398mm
Mains cable length| 1. SM
Remote control|
Battery| 2 x AAA
Bluetooth|
Bluetooth compatibility| A2DP, AVRCP, HPE
Bluetooth version| V5.0
Pairing name| AUDVOI

How to Set up the Soundbar and TV?

Normally as below: Settings ->Audio->Digital Audio

More examples for various TV brands:

• Samsung TV
  Settings > Sound > Sound output > select Receiver (HDMI)
  Settings > Sound > Expert Settings > Digital Output Audio Format > PCM
  Settings > Sound > Sound Output > Expert Settings > Digital Output Audio Delay

  ON Settings > Sound > Sound Output > Expert Settings > HDMI ARC Mode > Auto

• VIZIO TV
  Settings > Audio > TV Speakers > Off
  Settings > System > CEC > Enabled
  Settings > Audio > Volume Level > Off
  Settings > Audio >Surround sound>Off
  Settings > Audio > Analog Audio Out>Fixed
  Settings > Audio >Advanced Audio > Digital Audio Out > PCM

• Sony TV
  Settings > Display & Sounds > Audio Output > Speakers > Audio System
  Settings > Display & Sounds > Audio Output > Digital Audio Out > PCM
  Settings > Display & Sounds > Audio Output > Pass-Through Mode > OFF
  Settings Channels & Inputs > External inputs >BRAVIA Sync > BRAVIA Sync control > ON Settings > Display & Sounds > Audio Output > e ARC Mode > On

• LG TV
  All Settings > General – Devices > HDMI Settings > SIMPLINK(HDMI – CEC)> ON
  All Settings > Sound > Advances Settings > Digital Sound Output > PCM
  All Settings > Sound > Sound Out > Use Wired Speaker > HDMI(ARC)Device

• TCL ROKU TV
  Settings > Audio > Audio output > Auto
  Settings > Audio > Digital audio format > Select Stereo
  Settings >Audio >TV Speakers >Select off

• Hisense ROKU TV
  Settings > Audio > TV Speakers > Select Disabled
  Settings > Audio > Digital Audio out > Select Stereo

• ONN ROKU TV
  Settings > Audio > TV Speakers > Select Disabled
  Settings > Audio > Digital Audio Format > Select Stereo

• insignia Fire TV
  Settings Display & Sounds > Audio Output > TV Speakers > select OFF
  Settings Display& Sounds > Audio Output > Digital Audio Format > select PCM Settings Display & Sounds > HDMI CEC Device Control >ON

• Toshiba Fire TV
  Settings > Display & Sounds > Audio Output > TV Speakers > select OFF Settings

  Display & Sounds > Audio Output > Digital Audio Format > select PCM Settings Display & Sounds > HDMI CEC Device Control > ON
  Panasonic TV
  Menu Audio Settings > Advanced Audio > TV Speakers > Select OFF
  Menu > Audio Settings > Advanced Audio > HDMl > select DIGITAL
  Menu > Audio Settings > Advanced Audio > Digital Audio Out > Select PCM Sharp TV(Powered by Android)
  settings > devices preferences > sound > Digital Output > select PCM
  settings > devices preferences > sound > Speakers > External audio system Roku TV Stick
  Settings > Audio > Digital Output Format > Stereo
  Settings > Audio > Audio Mode > Select Stereo
  Settings >Audio>HDMI>Select PCM-Stereo

• Fire TV stick
  Settings > Display & Sounds > Audio > Surround Sound > PCM
  Settings > Display & Sounds > HDMI CEC Device Control > ON
  Settings >Display & Sounds >Audio Output> TV Speakers>select OFF

• Fire TV Cube
  1. Settings >Display & Sounds >Surround sound > PCM
  2. Settings >Display & Sounds >Audio Output> TV Speakers>select OFF Hisense ROKU TV
  Settings > Audio > Tv Speakers > Select Disabled
  Settings > Audio > Digital Audio out > Select Stereo

• ONN ROKU TV
  Settings > Audio > TV Speakers > Select Disabled
  Settings > Audio > Digital Audio Format > Select Stereo

• TCL TV ( Powered by Android )
  TV Settings > Audio > Advanced Settings > Digital Audio Out > Select PCM TV Settings > System > T-Link > Select ON

• Hisense TV ( Powered by Android )
  Settings > Sound > Speakers > select ARC
  Settings > Sound > Advanced Settings > Digital Audio Out > Select PCM

• Sharp TV
  Settings > sound > Advanced audio settings > TV Speaker & ARC > select ARC Settings > sound > Advanced audio settings > Digital Audio Out > select PCM
  

FREQUENTLY ASKED QUESTION

What is the Audvoi SR190AD Wall Mountable SoundBar?

The Audvoi SR190AD is a soundbar that is designed to be mounted on the wall to enhance audio quality for TVs and other audio sources.

What are the key features of the Audvoi SR190AD SoundBar?

Key features of the Audvoi SR190AD may include wall-mountable design, Bluetooth connectivity, multiple audio inputs, built-in speakers, remote control functionality, and sound modes.

How does the wall-mounting work for the Audvoi SR190AD SoundBar?

The Audvoi SR190AD SoundBar typically comes with wall-mounting brackets and screws. You can attach the brackets to the back of the soundbar and then mount it securely on the wall.

Can I connect the Audvoi SR190AD SoundBar to my TV?

Yes, you can connect the Audvoi SR190AD SoundBar to your TV using various methods, including HDMI, optical (Toslink), RCA, or auxiliary (3.5mm) inputs.

How do I pair my device with the Audvoi SR190AD SoundBar?

To pair your device with the Audvoi SR190AD SoundBar, enable Bluetooth on your device, search for available devices, and select SoundBar from the list.

What sound modes are available on the Audvoi SR190AD SoundBar?

The Audvoi SR190AD SoundBar may offer different sound modes such as Standard, Music, Movie, or Voice, which optimize the audio output based on the content being played.

What are the available audio inputs on the Audvoi SR190AD SoundBar?

The available audio inputs on the Audvoi SR190AD SoundBar may include HDMI, optical (Toslink), RCA, and auxiliary (3.5mm) inputs.

Can I control the Audvoi SR190AD SoundBar with a remote control?

Yes, the Audvoi SR190AD SoundBar usually comes with a remote control for convenient operation.

Can I stream music wirelessly to the Audvoi SR190AD SoundBar?

Yes, you can stream music wirelessly to the Audvoi SR190AD SoundBar using Bluetooth connectivity from compatible devices.

Does the Audvoi SR190AD SoundBar support virtual surround sound?

The Audvoi SR190AD SoundBar may have built-in technologies or sound modes that enhance the audio and provide a simulated surround sound experience.

Can I use the Audvoi SR190AD SoundBar without a TV?

Yes, you can use the Audvoi SR190AD SoundBar without a TV by connecting it to other audio sources such as smartphones, tablets, or computers.

Can I control the Audvoi SR190AD SoundBar with my smartphone?

In most cases, you cannot control the Audvoi SR190AD SoundBar directly with a smartphone. However, you can use your smartphone as a music source through Bluetooth connectivity.

Does the Audvoi SR190AD SoundBar have built-in equalizer settings?

The Audvoi SR190AD SoundBar may have built-in equalizer settings that allow you to adjust the sound according to your preferences.

Does the Audvoi SR190AD SoundBar support voice assistants like Alexa or Google Assistant?

The Audvoi SR190AD SoundBar may not have built-in support for voice assistants. However, you can use separate devices like Amazon Echo or Google Nest to control the SoundBar using voice commands.

Does the Audvoi SR190AD SoundBar have a display?

The Audvoi SR190AD SoundBar may or may not have a built-in display. Some models feature a small LED or LCD display to show settings and volume levels.

VIDEO – PRODUCT OVERVIEW

DOWNLOAD THE PDF LINK:Audvoi SR190AD Wall Mountable SoundBar Instruction Manual

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>