CANOPIA LEDRO 10×14, 3×4.3 Martinique Enclosure System Instruction Manual

LEDRO 10×14, 3×4.3 Martinique Enclosure System

Product Information

• Product Name: LEDROTM 10×14 / 3×4.3 MARTINIQUETM ENCLOSURE SYSTEM
• Manufacturer: Palram Industries Ltd.
• Website: https://canopia.com/product/ledro-enclosed-gazebo/
• Registered Design: Yes
• Model Number: 600675_22.02_MV-1.5

Product Usage Instructions

1. Before starting assembly, carefully read the instructions provided in the user manual.
2. Keep the user manual in a safe place for future reference.
3. To watch the assembly video, choose one of the following methods
   • Scan the QR code provided in the user manual.
   • Search “Palram – Canopia Ledro Assembly” on YouTube.
   • Go to https://bit.ly/39yPr1N
   • Visit https://canopia.com/product/ledro-enclosed-gazebo/
4. If you need any assistance or have any inquiries:
   • For general questions, visit bit.ly/3kY07dP
   • Contact customer support:
   • USA: Call 877-627-8476 or email hobbyservice@poly-tex.com
   • CANADA: Call 905-5646007 or email sales@footprintproducts.com
   • GERMANY: Call 0180-522-8778 or email customer.serviceDE@palram.com
   • FRANCE: Call +33-169-791-094 or email customer.serviceFR@palram.com
   • UK: Call 01302-380775 or email customer.serviceUK@palram.com
   • ISRAEL: Call 04-848-6816 or email customer.service@palram.com
   • AUSTRALIA: Call 03-9219-4444 or email salesvic@palram.com
5. For after-sales service, missing parts, or new part requests
   • Use the self-service form at bit.ly/3js7yZi
   • Scan the QR code provided in the user manual to access the form.

HOW TO ASSEMBLE VIDEO

4 WAYS TO WATCH OUR VIDEO

WE´VE GOT YOU COVERED
Our self-service form makes it convenient and fast. Go to the URL below or scan the QR code with your phone to submit you request.

• Missing a part or need a new one?
  bit.ly/3js7yZi

• Need help assembling your product?
  bit.ly/3kqqFEc

WE ARE HERE TO HELP
For general questions: bit.ly/3kY07dP

USA CANADA ,UNITED KINGDOM, IRELAND

• 877-627-8476
• 905-5646007
• 01302-380775
• hobbyservice@poly-tex.com
• sales@footprintproducts.com
• customer.serviceUK@palram.com

GERMANY FRANCE ,BELGIUM ISRAEL

• 0180-522-8778
• +33-169-791-094
• 04-848-6816
• customer.serviceDE@palram.com
• customer.serviceFR@palram.com
• customer.service@palram.com

ITALY , NETHERLANDS, PORTUGAL, SPAIN AUSTRIA, LUXEMBURG, LIECHTENSTEIN AUSTRALIA

• +33-169-791-094
• +49-180-522-8778
• 03-9219-4444
• customer.serviceFR@palram.com
• customer.serviceDE@palram.com
• salesvic@palram.com

NORWAY • SWEDEN • ARGENTINA • GREECE • GREENLAND • ICELAND • ESTONIA • JAPAN • LATVIA • LITHUANIA MAURITIUS • MEXICO • ROMANIA • RUSSIA • TURKEY • UZBEKISTAN • UKRAINE • SWAZILAND • KOREA

• +972-4-848-6816
• customer.service@palram.com

AUSTRALIA – GREENHOUSES HUNGARY • SLOVAKIA NEW ZEALAND

• 03-9544-6-999
• +420-493-523-523
• 0800 800 880
• info@mazedistribution.com.au
• servis@garland.cz
• customer.service@palram.com

DENMARK SOUTH AFRICA CROATIA • SLOVENIA

• 07-575 42 70
• 011-397-7771
• 0599-37-057
• post@nshnordic.com
• receptionza@palram.com
• info@ms-viscom.com

CZECH REPUBLIC FINLAND POLAND

• 0493-523-523
• Neuvonta: 09-6866720
• Tuki / Varaosat: 050-3715350
• Infolinia: 801-011-929
  • 22-349-93-36
• servis@garland.cz
• www.horisontenterprises.fi
• tuki@horisontenterprises.fi
• kontakt@ogrodosfera.pl

CYPRUS SWITZERLAND

• 0224-971-13
• 062-287-33-77
• alpaco@alpacodomica.com
• www.alpacodomica.com
• info@ritter.ch

INFORMATION

A – PREPARE THE SITE

The product must be positioned and fixed on a flat level surface.

1. Clear the site
2. Level the ground

• IMPORTANT

We recommend checking for restrictions or covenants for building this product in your area. In addition we advise to check if you need to submit any forms or if any permit is required prior to building the product.

B – CHOOSE YOUR FOUNDATION TYPE

For a foundation, we recommend using three material types: Concrete/ Pressure treated wood/ wood deck

• 0ption 1: Solid foundation

• Option 2: Solid frame

C – ANCHOR TO FOUNDATION

On a solid foundation/ frame

• Secure the product to the foundation of your choice using suitable screws & plugs or masonry anchors.

• Please consult with an expert regarding which fasteners are suitable for other surfaces types (not supplied).
  

• Make sure you have at least 5 cm/ 2″ between the product base and the edges of your foundation – on all sides.

• The below measurements of the walls’ perimeter do not include the gazebo’s poles.
• The measurements of the walls’ perimeter may vary due to direction of the doors and set walls, see below drawings of both options.

SAFETY ADVICE

• It is of utmost importance to assemble all of the parts according to the directions. Do not skip any steps.
• Always wear work gloves during panel sliding .
• Always wear shoes and safety goggles when working with extruded aluminium.
• If using a step ladder or power tools make sure that you follow the manufacturer’s safety advice.
• Do not touch overhead power cables with the aluminium profiles.
• Do not attempt to assemble the product in windy or wet conditions.
• Do not climb or stand on the roof.
• Dispose of all plastic bags. Keep them out of reach of small children.
• Keep children away from the assembly area.
• Do not lean against or push the products during construction.
• Do not position your product in an area exposed to excessive winds.
• Do not attempt to assemble this product if you are tired, have taken drugs or alcohol or if you are prone to dizzy spells.
• Hot items such as recently used grills, blowtorches etc. must not be stored in the product.
• Make sure there are no hidden pipes or cables in the ground before anchoring to foundation.
• This product is designed to be used mainly as a garden gazebo.
• Make sure to anchor the product directly to a solid foundation to increase the product’s stability and wind resistance in areas with severe weather conditions. Make sure that there are no obstructions between the assembly area and the final position of the product.

CARE & MAINTENANCE

• When your product needs to be cleaned, use a mild detergent solution and rinse with cold clean water.
• DO NOT use acetone, abrasive cleaners or other special detergents to clean the panels.
• Clean the product once assembly is complete.

TOOLS & EQUIPMENT

BEFORE ASSEMBLY

1. Selecting a site:
2. Choose your site carefully before beginning assembly.
3. Choose a sunny position away from overhanging trees.
4. The product must be positioned and fixed on a flat level surface.
5. The product must be secured directly to a solid foundation.
6. This is a multi-part assembly best achieved by two people. Allow at least half a day for the assembly process.
7. Take all components & parts out of the packages. Sort the parts and check against the content parts list.
8. Parts should be laid out close at hand. Keep all small parts (screws etc.) in a bowl so they do not get lost.
9. Please note multi-sided profiles are used in this product. As a result some holes in the profiles are not used during assembly.
10. Please review entire instructions before starting. Carry out the assembly steps in exact order.
11. Please consult your local authorities if any permits are required prior to constructing the product.
12. Please ensure you have sufficient side space for inserting the roof panels during the assembly process.

IMPORTANT!

• Firmly connect the product to a level surface immediately after completion of the assembly .
• Anchoring this product to the ground is essential to its stability and rigidity.
• It is required to complete this stage in order for your warranty to be valid.
• During assembly use a soft surface below the parts to avoid scratches and damages.

DURING ASSEMBLY

During assembly, you will encounter different icons for different products. Please see below for more information:

• During assembly you will encounter the information icon, please refer to the relevant assembly step for additional comments and assistance.
• You may use silicone lubricant spray on the frame in order to help you slide the panels into the profiles. Do not spray the panels.
• Use a rubber mallet if necessary.
• Make sure you remove covering plastic film from both sides of the panel.
• All panels with the stamped words “THIS SIDE OUT” must be facing out to create full UV protection. Remove plastic sticker as panels are locked in place.
• This icon indicates that the installer should be inside the product.
• This icon indicates that the installer should be outside the product
• These 2 icons below indicate if screw’s tightening is required or not.
• Temporary tightening of a few screws may be needed to prevent a profile from sliding out.
• Tighten all screws once assembly is completed.

IMPORTANT ASSEMBLY STEPS
When encountering this information icon during assembly, please refer to the relevant assembly step for important additional comments.

1. Step 1:  Assemble the gazebo as per its instructions. Do not assemble the plastic corner pieces (part #8327), the plastic clips (part #7829) and do not anchor to the base you prepared in advance!

2. Step 2:  Disassemble the internal foot-pads (part #212 or 8758).

3. Step 4:  Choose Option A or B.
   This will determine the door location.

4. Option O Steps:

5. 5-30 Option G Steps: 31-57

• Step: A6 B32 During assembly, from this step onwards, use a carton or other soft material below the parts to avoid scratches and damages.
• Step: A9 B 35 Peel the film from the panels’ edges before sliding them into the profiles, peel the entire film once the assembly is complete.
• Step: A 13 B 39 The installer should be inside the product.
• Step: A 14 B41 During assembly, from this step onwards, use a carton or other soft material below the parts to avoid scratches and damages.
• Step: A 19 20 B 46, 47 The installer should be inside the product.
• Step: A22 B 49 Apply silicone on the inside in order to seal as shown in Drawing a. Screws and corner cover are supplied with the gazebo!
• Step: A23 B50 Make sure the gazebo is leveled prior to anchoring the corner poles. Use suitable screws and plugs as per your chosen foundation.
• Step: A25 B52 Make sure the entire gazebo is leveled prior to anchoring it to the surface of your choosing. Use suitable screws and plugs.
• Step: A26 B53 Install the sealing strip on the outer side as shown in the diagram. Use mild soap if needed.
• Step: A28 B55 Assemble the doors as shown with the default internal lock. Door lock can also be assembled externally. See A- Step 29 / 56.
• Step: A 29 B56 Optional: Disassemble, then assemble door lock externally.

Contents

Assembly

Assemble the gazebo as per its instructions. Do not assemble the plastic corner pieces (part #8327), the plastic clips (part #7829) and do not anchor to the base you prepared in advance!

Disassemble the internal foot-pads (part #212 or 8758).

Step#3

Choose Option A or B.
This will determine the door location.

Step5

During assembly, from this step onwards, use a carton or other soft material below the parts to avoid scratches and damages.

Step 7

Step 8:A

Peel the film from the panels’ edges before sliding them into the profiles, peel the entire film once the assembly is complete.

Step 10

Step 11

Step 12

The installer should be inside the product.

During assembly, from this step onwards, use a carton or other soft material below the parts to avoid scratches and damages.

Step 15

Step 16

Step 17

Step 18

The installer should be inside the product.

The installer should be inside the product.

Step 21

Apply silicone on the inside in order to seal as shown in Drawing a.Screws and corner cover are supplied with the gazebo!

Make sure the gazebo is leveled prior to anchoring the corer poles.Use suitable screws and plugs as per your chosen foundation.

Step 24

Make sure the entire gazebo is leveled prior to anchoring it to the surface of your choosing. Use suitable screws and plugs.

Install the sealing strip on the outer side as shown in the diagram. Use mild soap if needed.

Step 27

Assemble the doors as shown with the default internal lock. Door lock can also be assembled externally. See A- Step 29 Optional: Disassemble, then assemble door lock externally .

Step30

Step 31 During assembly, from this step onwards, use a carton or other soft material below the parts to avoid scratches and damages.

Step 33

Step 34

Peel the film from the panels’ edges before sliding them into the profiles, peel the entire film once the assembly is complete.

Step 36

Step 37

Step 38 The installer should be inside the product.

Step 40 During assembly, from this step onwards, use a carton or other soft material below the parts to avoid scratches and damages. Step 42 Step 43 Step 44 Step 45The installer should be inside the product. The installer should be inside the product.

Step 48 Apply silicone on the inside in order to seal as shown in Drawing a. Screws and corner cover are supplied with the gazebo! Make sure the gazebo is leveled prior to anchoring the corner poles. Use suitable screws and plugs as per your chosen foundation. Step 51 Make sure the entire gazebo is leveled prior to anchoring it to the surface of your choosing. Use suitable screws and plugs. Install the sealing strip on the outer side as shown in the diagram. Use mild soap if needed. Step 54 Assemble the doors as shown with the default internal lock. Door lock can also be assembled externally. See A- Step 56. Optional: Disassemble, then assemble door lock externally .

Step 57

10 years Limited Warranty

Pal ram Canopia Ltd (Company number: 512106824) whose registered office is at Teradion Industrial Park, M.P Misgav20174, Israel (“Canopia”) warrants that the product will be free from defects in material or workmanship for a period of 10 years from the original date of purchase subject to the definitions, terms and conditions contained in this warranty.

Conditions

1. This warranty shall be valid only if the product is installed, cleaned, handled and maintained in accordance with Canopia’s written recommendations (Recommended Use: Hobby Gardening).

2. Without derogating from the above, damage caused by use of force, incorrect handling, inappropriate use, neglectful use or assembly or maintenance, accidents,
   impact from foreign objects, vandalism, pollutants, alteration, painting, connecting, gluing, sealing not in accordance with the user’s manual, or damage resulting from cleaning with incompatible detergents and minor deviations of the product are not covered by this warranty.

3. This warranty does not apply to damage resulting from “force majeure”, which includes but is not limited to, hail, storm, tornado, hurricane, blizzard, flood, fire effects.

4. This warranty Is void if structural parts and components used are not compatible with Canopia’s written recommendations.

5. This Warranty applies only to the original purchaser of the product. It does not extend to any other purchaser or user of the product (including, but not limited to,
   any person who acquires the product from the original purchaser).

6. Any other use for any other purpose is under user’s sole responsibility. Canopia disclaims and assumes no liability for any use not recommended by this warranty.

Claims and Notifications

1. Every warranty claim must be notified in writing to Canopia within 30 days after the discovery of the defective product, enclosing the original sales receipt and this warranty.
2. The claimant must allow Canopia to inspect the product involved and the installation site itself while the product is still in its original position and has not been removed or moved or altered in any way and/or return the product to Canopia for testing.
3. Canop1a reserves the right to investigate independently the cause of any failure.

Compensation

1. If a claim under this Warranty is properly notified and approved by Canopia, the purchaser, at Canopia’s option, may either (a) purchase a replacement product or part/s; or (b) receive refund of the original product or part/s purchase price, all in accordance with the following schedule:

2. For avoidance of any doubt, calculation for determination regarding compensation for defective part/s, according to the schedule above, will be based on the contribution
   of the defective part to the original cost of the product. Canopia reserves the right to provide substitutions if the product or any part of it is unavailable or obsolete.

3. This warranty does not cover any costs and expenses of removal and installation of the product or taxes or shipping cost or any other direct or indirect loss(es) which may result from the product failure.
   

General Conditions and Limitations

1. OTHER THAN HAS BEEN SPECIFICALLY STATED IN THIS WARRANTY, ALL OTHER WARRANTIES, WHITHER EXPRESS OR IMPLIED, INCLUDING ALL IMPLIED
   WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PRTICULAR PURPOSE ARE EXCLUDED SO FAR AS THE LAW PERMITS.

2. EXCEPT WHERE WE HAVE SPECIFICALLY STATED IN THIS WARRANTY, CANOPIA SHALL NOT BE LIABLE FOR ANY LOSSES OR DAMAGES THE PURCHASER SUFFERS
   DIRECTLY, INDIRECTLY, OR AS A CONSEQUENCE OF USING, OR IN ANY OTHER WAY CONNECTED TO THE PRODUCT.

3. IF CANOPIA IS PROHIBITED UNDER ANY APPLICABLE LAW FROM EXCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
   PURPOSE IN RELATION TO THE PRODUCT, THE DURATION OF ALL SUCH IMPLIED WARRANTIES IS EXPRESSLY LIMITED TO THE DURATION OF THIS WARRANTY OR, IF LONGER, THE MAXIMUM PERIOD REQUIRED BY APPLICABLE LAW.

4. THE PURCHASER IS SOLELY RESPONSIBLE FOR DETERMINING WHITHER THE HANDLING, STORAGE, ASSEMBLY, INSTALLATION OR USEOF THE PRODUCT IS SAFE AND APPROPRIATE IN ANY LOCATION, FOR ANY GIVEN APPLICATION OR IN ANY GIVEN CIRCUMSTANCE. CANOPIA IS NOT RESPONSIBLE FOR ANY DAMAGES OR INJURY TO THE PURCHASER, ANY OTHER PERSON OR ANY PROPERTY RESULTING FROM THE IMPROPER HANDLING, STORAGE, INSTALLATION, ASSEMBLY OR USEOF THE PRODUCT OR THE FAILURE TO FOLLOW THE WRITTEN INSTRUCTIONS REGARDING THE HANDLING, STORAGE, INSTALLATION, ASSEMBLY AND USEOF THE PRODUCT.

5. UNLESS OTHERWISE EXPRESSLY INDICATED BY CANOPIA, THE PRODUCT IS INTENDED FOR NORMAL RESIDENTIAL AND COMMERCIAL USE ONLY. CANO PIA IS NOT RESPONSIBLE FOR ANY LOSS, DAMAGE, COST OR EXPENSE RESULTING FROM ANY USE OF THE PRODUCT FOR ANY PURPOSE THAT IS NOT RECOMMENDED BY THE WRITTEN INSTRUCTIONS OR THAT IS NOT PERMITTED BY ANY APPLICABLE LEGISLATION OR OTHER CODES IN EFFECT IN THE LOCATION WHERE THE PURCHASER WILL USE THE PRODUCT.

6. PLEASE NOTE: ANCHORING THIS PRODUCT TO THE GROUND IS ESSENTIAL TO ITS STABILITY AND RIGIDITY. IT IS REQUIRED TO COMPLETE THIS STAGE IN ORDER FOR YOUR WARRANTY TO BE VALID.

Declaration of Performance

According to Construction Products Council Directive UE N °305/2011 and EN 14963:2006 Issue Date 01/01/2022

1. Identification code: Ledro™ 4300, refer to CE label no 071
2. Type: A light transmitting self-supporting Twin-wall PC roofing structure with upstand made of aluminum and galvanized steel elements
3. Intended use: open multi-purpose covering where the ground slope is less then 5%
4. Manufacturer: Pal ram Canopia Ltd . Teradion Industrial Park, M.P Misgav 2017400, P.O.B. 53, Israel
5. Importer and EU representative : PALRAM Applications UK, Unit 40 J3 Industrial Estate Carr Hill, Doncaster DN4 8DE
6. Assessment and verification of constancy of performance: System 3
7. Declared performance:

Palram Canopia Ltd.
Teradion Industrial Park, M.P Misgav 2017400, P.O.B 53, Israel Tel +972.4.848.6900 I
Fax +972.4.848.6901 canopia@palram.com I www.canopia.com

References

• palramapplications.com - This website is for sale! - palramapplications Resources and Information.
• palramapplications.com - This website is for sale! - palramapplications Resources and Information.
• palramapplications.com - This website is for sale! - palramapplications Resources and Information.
• tex.com
• Inspection Systems for the Electronics Industry – Viscom – Viscom
• Αρχική Σελίδα - Alpaco Domica
• Canopia United Kingdom - Celebrate Outdoor Living
• YouTube

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>