ricoo TS2211 Monitor Arm Desk Mount Instruction Manual
- June 12, 2024
- ricoo
Table of Contents
ricoo TS2211 Monitor Arm Desk Mount
Dear customer,
we are pleased that you have decided for a product of the brand “RICOO”.
Sometimes, despite our efforts to provide you with a high-quality product, it
may happen that an accessory is missing or a part is damaged during transport.
Please do not return the item in such a case, simply request replacement for
the missing or damaged part at our customer hotline. Contact details from our
customer hotline are listed below. When contacting us, please mention the
article data (listed on top), article color as well as the required spare part
numbers (including the required quantity of items), as indicated in the “Scope
of delivery” section of this manual. Please keep ready your order number /
order ID for our customer hotline. We will process your request immediately!
Product Information
The product is a screen mount designed for mounting displays. It supports VESA hole distances in the minimum and maximum distance ranges specified in the manual. The product has a maximum load capacity of 15kg (33lbs). It comes with various components included in the scope of delivery.
The manufacturer of the product is E.N.Z. Engineering GmbH, located at Salzmatten 6, 79341 Kenzingen (Germany).
- Contact information:
- E-Mail: support@ricoo.de
- Website: www.ricoo.eu
Product Usage Instructions
- Before starting the installation, carefully read the entire instruction manual provided.
- Check the distance between the VESA mounting holes on your display before installation.
- Ensure that the load weight does not exceed the maximum capacity of 15kg (33lbs) to avoid property damage or serious injury.
- Assemble the components A, B, C, and D according to the provided montageanleitung or assembly instructions in your preferred language (DE, EN, FR, ES, IT).
- Use the provided screws M-A and M-B (M4x14 and M5x14) to secure the assembled components.
- If applicable, attach any optional components or accessories (not included) as desired.
- Place the screen mount on a suitable surface, ensuring it is stable and secure.
- Mount your display onto the screen mount using the VESA hole distance specified for your display (75×75 or 100×100).
- Double-check that the display is securely attached and properly aligned.
- Installation is complete. Enjoy your mounted display!
Please refer to the product manual for any additional information or specific instructions related to your model.
Scope of delivery
BEFORE installation
Please check BEFORE installation distance between VESA mounting holes on your
display!
This screen mount supports VESA hole distance in the minimum and maximum
distance ranges given above.
VESA – Hole distance = Distances between the mounting holes on the screen
back.
INSTRUCTION
NOTE: Read the entire instruction manual before you start installation and assembly.
- Please note: I m ages in these assembly instructions are only technical presentations of the product. Actual product design may vary minimally.
- Do not begin the installation until you have read and understood all the instructions and warnings contained in this installation sheet. If you have any questions regarding any of the instructions or warnings, please contact your local distributor.
- This product was designed to be installed and used ONLY as specified in this manual. Improper installation of this product may cause damage or serious injury.
- This product may only be assembled/installed by the technical staff.
- Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
- Always use an assistant or mechanical lifting equipment to safely lift and position the equipment.
- Tighten screws firmly, but do not over-tighten. Over-tightening can cause damage the items, this greatly reduces their holding power.
- This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
- By reason of the large television/monitor construction types on the market, we can’t adjust our screen installation materials for each screen type. Therefore it is possible that the screws which are numerously delivered don’t fit with your TV/Monitor. We ask for your understanding that we can’t cover up all possibilities of many screen types.
- Make sure that before and after the installation of the product neither you nor somebody else can be injured and other objects can be damaged. In case of doubt request for help from an expert.
- Make also sure that you and optionally the co-helper or representatives have registered the mounting instructions before the installation and also the warning notice.
ASSEMBLY
E.N.Z. Engineering GmbH
Salzmatten 6
79341 Kenzingen
(Germany)
E-Mail: support@ricoo.de
www.ricoo.eu