SHARKWARD BRI819P-B-D-BLE Bluetooth Fixture Sensor Owner’s Manual
- June 12, 2024
- Sharkward
Table of Contents
SHARKWARD BRI819P-B-D-BLE Bluetooth Fixture Sensor
SPECIFICATION
The Sharkward Bluetooth Fixture Sensor is designed for indoor applications. Integrated sensors capture data that is both processed locally and transmitted over the Sharkward network, enabling a full suite of applications. In addition, the sensor supports Bluetooth® Low Energy communication with tags and other BLE devices.
OVERVIEW
The Bluetooth Fixture Sensor is a complete sensing and lighting control node
powered from its attached light fixture. Sensor information combined with a
configurable behavior profile makes the fixture Sensor an integral component
of an intelligent lighting control and sensing solution. With integrated
wireless communications for data transmission and remote configuration as well
as autonomous fixture-level control, this sensor brings advanced lighting
automation to a whole new level.
FEATURES AND BENEFITS
- Sharkward Fixture Sensor DLC: Meet DLC 5.2 Networked Lighting Control System.
- Localized Lighting Control: Light-level schedules, preferences, and profiles for each fixture are wirelessly communicated at system setup and stored for continuous operation.
- Bluetooth Low Energy: An embedded BLE radio allows the sensor to receive and transmit beacons as well as support communication with lighting control devices and other sensors.
- Occupancy/Vancacy/Manual: A digital Passive Infrared (PIR) sensor combined with ambient with 3 difference modes as options.
- Channel: 0-1 OV.
- Daylight Harvesting: Captured ambient light information is locally processed to raise and lower light levels based on available daylight.
- Room and Zone Control: Pairs with room switches for code-compliant manual-on or auto-off capability. Sensors can be grouped into zones that share occupancy sensing data and coordinate light control based on detected motion.
WIRE CONNECTION DIAGRAM
SENSOR INFORMATION
TECHNICAL DATA
- Motion Sensing: Passive IR
- Input Power: 120-277VAC 50/60Hz
- Control Output: 0-1 0V,max 25mA sinking current
- Maximum load: Resistive/Tungsten – 600W@120V
- Electronic Ballast – 800W@120V/1200W@277V
- Len L 1: Max. dectection radius 30ft; Max. mounting height 25ft
- Len L2: Max. dectection radius 30ft; Max .mounting height 40ft
- Operating temperature: -40° C-+ 75° C
- Wireless Standards: 5.0 Bluetooth Mesh
ORDERING INFORMATION
BRl819P-B-D-BLE Bluetooth Fixture Sensor
COMPLIANCE
- Europe CE roHs Reach
- United States
- Canada
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>