Tommee Tippee STRAW CUPS Instruction Manual
- June 8, 2024
- Tommee Tippee
Table of Contents
Tommee Tippee STRAW CUPS Instruction Manual
Product information for:
Please read and retain this important information for future reference.
INSTRUCTIONS FOR CLEANING VALVE CUPS
You should thoroughly clean your valve after each use.
DISASSEMBLE
-
Un-screw the lid
-
Pull out the valve
-
Separate the 2 parts of the valve (soft & hard)
CLEAN
- Wash all parts thoroughly in warm soapy water and rinse in clear water
- All parts can be washed in the dishwasher (top shelf only)
- Always shake parts after washing to remove excess water and leave to air dry before reassembling
REASSEMBLE
- Align the two parts and press together
AS PER ILLUSTRATION
WARNING
-
Ensure parts A and B of the soft side are pushed through the holes of the hard side. Ensure the cut B opens by squeezing before use.
-
Place the valve back in the lid, and push until the sides lock into place
-
Screw on lid
INSTRUCTION FOR CLEANING MEALTIME CUPS
You should thoroughly clean your valve after each use.
DISASSEMBLE
-
Remove lid from cup base
-
Grip lid and turn the locking connector anti-clockwise
-
Separate locking connector, silicone disk, screw ring and lid top
CLEAN
- Wash all parts thoroughly in warm soapy water and rinse in clear water
- All parts can be washed in the dishwasher (top shelf only)
- Always shake parts after washing to remove excess water and leave to air dry before reassembling
REASSEMBLE
-
Turn screw ring upside down and place silicone disk inside with grooves facing up
-
Take the lid top and push down through the hole in the silicone disk
-
Align locking connector and turn clockwise to lock
Place lid on base and align the 2 dots on the back – Remember: Do not over tighten.
Tommee Tippee STRAW CUPS Instruction Manual – Download
[optimized]
Tommee Tippee STRAW CUPS Instruction Manual – Download
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>