Shenzhen Wyj Technology LB-002 Magic Touch Controller Installation Guide
- June 8, 2024
- Shenzhen Wyj Technology
Table of Contents
Shenzhen Wyj Technology LB-002 Magic Touch Controller
PRODUCT ASSEMBLY
-
Take the first section at the bottom.
-
install the second section of lamp.
-
install the third section of lamp.
-
Using the provided hardware, install the screws into the light bars and tighten.
-
Please use the accessory form packing box, then tighten components by referring to Pl or P2
Magic Touch Controller Manual
Basic parameters
Working voltage: DC5-24V Effect model : 358 kinds of effect Control point
figure: Aximum adjustable to 2048 pixels Remote control distance: S30m Battery
model: AM. Battery(remote control battery)
Remote control operation instructions
On/of key(power on/off)
Pause button(long press this button for 5 seconds to enter the point
adjustment state under shutdown state)
: Color ring(touch the corresponding color and the light strip will display the corresponding color)
M+: Mode plus(next effect)
M-: Mode minus(last effect)
S+: Speed up(the light runs faster)
S-: Slow down(the running speed of the light slows down)
B+: Increase in brightness
B-: Decrease in brightness
Auto play: press any key of color ring first, then press the pause button loop
from the first effect to the last effect.
Regulating point function : First, press “On key” to turn of the machine
. In the shutdown state, long press the “pause” button for 5 seconds to enter
the point adjustment state. Press “M+” and “M-“to adjust the points. After
adjustment, press “On” to save.
Code function: in any case, long press the color ring “top blue key”
for 5 seconds(can not shake One-to-one matching between the remote control and
the controller. After the match, the blue light flashes three times, at
which time only the remote control can control the controller.
Code clearing function: in any case, long press the “yellow key at the
bottom” of the coloring
Magic Touch Controller Manual
Remote control operation instructions
Power/Play pause
- Auto play 366 Modes
- In the off state, press this button to enter the setup menu, then press the M +or M-to adjust LED pixels. Press the blue button to adjust the RGB sequence. After complete setting, press OFF to save/exit.
: Shutdown. Auto save when shutdown
: Speed+ ( 10 levels speed adjust)
: Speed- ( 10 levels speed adjust)
: Mode+ (366 kinds mode switching)
: Mode- (366 kinds mode switching)
: Brightness+ (Brightness adjustment(321evels)
: Brightness- (Brightness adjustment(321evels)
Monochrome Display Press these buttons, light strip displays its corresponding colors.
LED mobile phone Bluetooth controller
Product Features:
- LED Bluetooth controller is directly via mobile phone control remote distance can reach 10m without the need to set up, easy to connect open the software within 5 seconds you can automatically connect the controller
- Flow the rhythm of the music changes
- Group control
- Brightness.speed addition and subtraction
- Maximum can be 10 meters SPI driven strip, up to 200 pixels.
- The software shows that the text is based on the language of the mobile phone set up automatic transformation of Chinese, English and other local languages.
Animation Effect:
- Different color control of each group of LED point.
- Colorful gradient
- All kinds of mon chrome, double color gradient
- All kinds of monochrome, double color, colorful flashing
- Colorful jump
- Follow the thythm of the music changes.
Product Paramters:
- SPI Strip Type: WS2811, SM16703, 16730p, SG1903, etc.
- Bluetooth: BLE V4.2
- Input Voltage:4.5-12V
- Working Temp:-25-75t:
- Size:43″22″11mm
APP Program Usage
Portable IR Controller
Portable and easy to use IR controller. Key Functions:
- Turn on, turn off lights
- Auto loop all modes
- Speed+/-
- Mode up/down
- Lights+/-
- 12-classic color shortcuts .Key Functions:
Scan two-dimensional code download App
-
Connect LED color strip and controller, power on controller
-
Scan two-dimensional code download APP:
-
Start APP, search and connect controller
-
Enjoy the Bluetooth wireless control experience
Product Description
Bluetooth Symphony Controller
Remote control
Download App Software
Please search LED LAMP in major Apocenters, or scan below QR code.
1. Download the “LED LAMP” APP with your mobile phones by scanning the QR
code on user manual or search the “LED LAMP”APP in iPhone APP store or Google
play store.
2. After the APP are downloaded successfully, you need to turn on Bluetooth
function on your phone firstly, then plug in the strip light, then open the
APP, your APP will pair with the strip light automatically and you can control
it.
☆ Android phones need to open the location function and allow permission
Unable to Connect Troubleshooting
- (Check if the power supply of the light strip is normal.
- Check if the Bluetooth is turn on.
- Check if there are other mobile phone are connected, Blue tooth 4.0 only support connections one to many, dose not support many to many.
- Check APP Bluetooth setting if the phone is connected to the device, if connect, exit the APP and reopen, the APP will go to connect automatically.
- Normal operations and can not connect, please exit the APP and reopen.
- Exit APP, restart mobile phone, power on the strip light, reopen the APP, then them will connect automatically.
INSTRUCTION
LED OMX 00-XXXX ( With voice control )
LEDDMX01-XXXX(No voice control)
On the homepage interface, pull down to refresh, the APP will automatically search for nearby devices. After finding the device. Click the device icon to enter the Night control interface. You can also click the “ ” button in the upper right comer. Select the device and enter the light control interface. {Select LED OMX 00-XXXX device}
-
Setting: You can set RGB sorting, timing, shake, and change skin.
-
Color interface: The color interface has three parts: color ring, aisle and monochrome. Mode interface: you can choose the mode, adjust the speed, adjust the brightness what you want;
-
Mode interface: you can choose the mode, adjust the speed, adjust the brightness what you want;
-
In custom interface, you can add color, choose mode, adjust speed.
-
Music interface: It is composed of two parts: voice control and music. The voice control interface has hundreds of voice control modes to choose from. The music interface requires a mobile phone to play songs.
-
Timer: can set the desired time period to open the desired mode, turn off the desired Mode.
FCC STATMENT
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>