OVSFBJPLG2A, OVSFBJPBK2A, OVSFBJPDB2A Ovela Jepson 2 Seater Sofa User Guide
- June 7, 2024
- OVELA
Table of Contents
OVSFBJPLG2A, OVSFBJPBK2A, OVSFBJPDB2A Ovela Jepson 2 Seater Sofa
COMPONENT
ASSEMBLY
STEP 1: Please assemble all the wooden legs.
STEP 2 : To use it as a sofa bed please open the bottom zippers and pull out the 4x metal legs. Close the zippers.
STEP 3 : To use it as a sofa seater, roll up the sofa end and pull up the sofa head like the diagram below.
The job is now complete!
In the interest of our environment please dispose of all packaging
thoughtfully.
WARNING:
- Read Instructions carefully Check no parts are missing.
- Lay out all of the components on a soft surface as if you were preparing to do a jigsaw puzzle.
- Carefully identify each component, especially those that are similar. The most common mistake is getting things back to front.
- Separate and identify each component from the hardware pack and rest each one in its proper location before fastening.
- Do not fully tighten screws (leave slightly loose).When the item is fully assembled tighten the screws – but do not over tighten.
- If glue is required DO NOT set until you are certain that the parts belong together.
IMPORTANT WARRANTY INFORMATION
Your product has had a Long and adventurous journey. The packaging may Look
Like it’s suffering from a little travel sickness, but your product should
still be in perfect condition and ready to enjoy.
We recommend that you keep your original product packaging if at all possible
because, in the unlikely event that you require a warranty repair, we cannot
collect and transport your item if it is not safely or securely packaged.
For products that require a user manual, it can be downloaded from
kogan.com/usermanuals/
If you need help using your product or for any other queries, please visit
help.kogan.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>