JETBOIL HalfGen Basecamp System User Guide
- June 12, 2024
- JETBOIL
Table of Contents
JETBOIL HalfGen Basecamp System
Product Information
The Stove Windscreen is a component of the Halfgen Basecamp System. It is designed to provide protection from wind and improve fuel efficiency during cooking. The system includes a regulator, rubber latches for securing the pan, and a windscreen with tabs for easy attachment to the feet of the system.
Product Usage Instructions
- Before using the product, read the included instructions carefully.
- To remove the pan, undo the rubber latches.
- Connect and secure the fuel cylinder to the regulator in an upright position.
- Open the valve fully by turning it counter-clockwise and flip the igniter lever.
- Connect and secure the regulator to the fuel input port located at the rear left of the system.
- Align the opening in the windscreen tabs over the feet of the system and pull to lock it in place.
- Adjust the flame as needed for cooking.
- Enjoy your cooking experience!
If you have any issues or are not satisfied with the product, please contact Customer Service at jetboil.com or call 1-800-572-8822.
Welcome to JetHead Nation.
To the epic adventures in the world and those who pursue them, we salute you!
WARNING:
For reference only. Do not use product without first reading included
Instructions.
Overview
Installation
- UNDO RUBBER LATCHES TO REMOVE PAN
- CONNECT AND SECURE REGULATOR TO FUEL INPUT PORT (REAR LEFT)
- CONNECT AND SECURE THE FUEL CYLINDER TO THE REGULATOR IN AN UPRIGHT POSITION
- ALIGN OPENING IN WINDSCREEN TABS OVER FEET AND PULL TO LOCK
- OPEN THE VALVE FULLY COUNTERCLOCKWISE AND FLIP THE IGNITER LEVER
- ADJUST THE FLAME AS NEEDED AND ENJOY!
If you are not satisfied with this Jetboil product, contact Customer Service at jetboil.com or call 1-800-572-8822.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>