TROY TECHNOLOGIES Push Wheelchair Handle Extender Installation Guide
- June 12, 2024
- TROY TECHNOLOGIES
Table of Contents
TROY TECHNOLOGIES Push Wheelchair Handle Extender
INSTALLATION INSTRUCTIONS
- Push on the fabric to locate the threaded inserts imbedded in the back of the seat as shown.
- Using a soldering iron, burn access holes through the fabric and padding in alignment with the threaded inserts. NOTE: If you purchased the Push Handles with the chair, the holes will already be there and you may disregard steps 1 & 2.
- Secure the handle tubes as shown using a #2 screwdriver and the screws provided.
Tightly secure the handle tubes to the seat back.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>