RAYBIT SC1 Streaming Camera User Guide
- June 12, 2024
- RAYBIT
Table of Contents
RAYBIT SC1 Streaming Camera
Product Information
The SC1 Streaming Camera is a high-definition camera designed for live streaming and recording videos. It features a FULL HD camera with AI face tracking function, allowing you to capture clear and focused footage. The camera is equipped with WiFi and Bluetooth capabilities for easy connectivity and control. It also comes with a cold shoe clamp for mounting on brackets or tripods.
Key Features
- Cold Shoe Clamp for mounting
- Streaming Indicator
- Take Photo/Video button
- AI Indicator
- FULL HD Camera
- AI ON/OFF button
- Battery
- WiFi and Bluetooth capabilities
Important Notices
Modifications or changes to the device that are not explicitly approved by the manufacturer may void your authority to operate the equipment. The device complies with FCC radiation exposure limits and should be installed and operated with a minimum distance of 20cm between the radiator and your body.
Product Usage Instructions
Easy Set-Up
- Install the camera on a bracket or tripod using the threaded hole at the bottom.
- Press the power button to turn on the camera.
- Press the Bluetooth button to enable Bluetooth connection.
Connecting to the RayBit SC1 App
- Download the RayBit SC1 app from your app store.
- Allow access to location and Bluetooth when prompted.
- Discover SC1 devices and select the camera for setup.
- Enter the WiFi interface and select your WiFi account.
- Enter your WiFi password and click “Done”.
Streaming and Recording
To start streaming or recording, follow these steps:
- Press the Photo button to take photos and record videos.
- To enable AI face-tracking function, press the AI button.
Charging the Camera
To charge the camera, follow these steps:
- Connect the Type-C charging adapter to the camera’s Type-C port.
- Connect the other end of the adapter to a USB port for charging.
Note: For more detailed instructions, including downloading the latest manual or watching the installation video, scan the QR code or visit raybit.com/pages/download.
WHAT’S IN THE BOX
OVERVIEW
- Cold Shoe Clamp
- Streaming Indicator
- Take Photo/Video
- AI indicator
- FULL HD Camera
- AI ON/OFF
- Battery
- WiFi
- Bluetooth
- Power
- Type-C Port
- Micro SD Slot
- Line in
- 1/4 UNC threaded hole
EASY SET-UP
- Install it on the bracket through the screw hole at the bottom of the camera.
- Press the power button to turn on.
- Press the Bluetooth button to enable the Bluetooth connection.
- Download the RayBit SC1 app.
- Press the “Photo” button to take photos and record videos.
- Press “AI” button to turn on camera AI face tracking function.
CHARGE
Scan
- Scan the OR code or visit our link to download the latest manual or watch the installation video. raybit.com/pages/download
FCC STATEMENT
FCC Warning
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>