SIGMA TOPLINE 2012 Universal Fast Setting Box Instruction Manual
- June 12, 2024
- SIGMA
Table of Contents
SIGMA TOPLINE 2012 Universal Fast Setting Box
Product Information
The Universal Fast Setting Box (UFSB) is a product manufactured by SIGMA- ELEKTRO GmbH. It is a versatile device designed to provide fast and accurate settings for various SIGMA ORIGINALS VDO R-LINE products, including TOPLINE 2012/2016.
The UFSB operates on a 9V power supply using 6 LR61 batteries. It comes with multiple language options such as DE, EN, FR, IT, ES, PT, and NL.
For more information and videos about the UFSB, please visit goto.sigmasport.com/ufsb/service.
Product Usage Instructions
FIRST START
- Open the battery compartment.
- Connect the battery.
- The UFSB is now ready for use.
Press the green button to switch on the UFSB.
- Now specify the clock format.
- (Additional steps may be present but not provided in the manual extract.)
- (Additional steps may be present but not provided in the manual extract.)
- Set the current altitude.
- A query now appears asking if you have finished configuring the settings.
You will see:
- First, configure the basic settings of the UFSB (start settings). Press F3 to go to the General Set.
- Press F2 to confirm your selection. The UFSB switches to the setting mode for the start settings.
You only need to configure these settings once the first time you use the UFSB.
Set the language:
- Press the buttons to select your language
- Press F3 to confirm your selection
Now specify the date format:
- Make a selection by pressing the buttons
- Press F3 to confirm your selection
Set the date
- Use the keyboard to enter the date
- Press F3 to continue
Now specify the clock format:
- Make a selection by pressing the buttons
- Press F3 to confirm your selection
Set the time:
- Use the keyboard to enter the hours and minutes
- Press F3 to confirm your selection
Choose your unit system:
- Press the / buttons to select your system
- Press F3 to confirm your selection If the Unit custom is choosen, the Measurement unit has to be defind for the following:
- Speed
- Temperature
- Weight
- Body size
- Altitude
- Fuel format
Set the current altitude:
- Enter the information using the keyboard
- Press F3 to confirm your selection
A query now appears asking if you have finished configuring the settings.
- Press F3 to confirm
Once you have fully configured the start settings, these are used as the settings for the various computer models
FEDERAL COMMUNICATION COMMISSION INTERFERENCE STATEMENT
The UFSB complies with Part 15 of the FCC Rules. It operates under the following conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
INDUSTRY CANADA STATEMENT
The UFSB contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). It operates under the following conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
The grantee is not responsible for any changes or modifications not expressly
approved by the party responsible for compliance. Such modifications could
void the user’s authority to operate the equipment.
The RF Exposure Compliance distance is 5 millimeters.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
INDUSTRY CANADA STATEMENT
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Technical Information
- Battery Type: 6 LR61 batteries
- Operation Temperature: Not specified in the manual extract
EU-DECLARATION OF CONFORMITY
SIGMA-ELEKTRO GmbH declares that the UFSB is compliant with the essential requirements and other relevant requirements of the EMC Directive 2014/30/EU, the ROHS Directive 2011/65/EU, and additional according to Directive (EU) 2015/883 to amend Annex II of the above-mentioned Directive with 4 additional substances. The declaration of conformity can be found at ce.sigmasport.com/ufsb.
VIDEOS & FURTHER INFORMATION
goto.sigmasport.com/ufsb/service
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>