TOYMAZING 62100748A RC Stunt Vehicle with Lights Instruction Manual

: June 12, 2024
: TOYMAZING

Table of Contents

TOYMAZING 62100748A RC Stunt Vehicle with Lights
Product Information
BATTERY REPLACEMENT
REMOTE CONTROL
BATTERY CAUTION
HOW TO OPERATE
FCC STATEMENTS
BAR SCANNER
Read User Manual Online (PDF format)
Download This Manual (PDF format)

TOYMAZING 62100748A RC Stunt Vehicle with Lights

TOYMAZING-62100748A-RC-Stunt-Vehicle-with-Lights-
produt

Product Information

The SZ23FDS62100748A 7693C CMYK RC Stunt Vehicle is a remote-controlled toy vehicle that lights up. It has a length of 19.7 cm (7.76 inches) and a width of 18.3 cm (7.2 inches). The vehicle is suitable for children aged 5 and above.

The toy vehicle comes with a price sticker indicating a price of $15. It requires battery power for operation, with the remote control requiring 2 x 1.5V AA batteries (not included) and the vehicle itself requiring 4 x 1.5V AA batteries (not included). The remote control operates at a frequency of 27MHz.

BATTERY REPLACEMENT

To replace batteries refer to the following directions & illustrations:

VEHICLE

Turn the power switch to the OFF position.
Use a Phillips screwdriver to loosen and remove the screw for the battery compartment door as shown.
Remove the battery compartment door.
Remove old batteries and replace with 4 new 1.5V “AA” batteries.
Replace the battery compartment door and tighten the screw.

REMOTE CONTROL

Use a Phillips screwdriver to loosen and remove the screw for the battery compartment door as shown.
Remove the battery compartment door.
Remove old batteries and replace with 2 new 1.5V “AA” batteries.
Replace the battery compartment door and tighten the screw.

BATTERY CAUTION

Alkaline batteries are recommended.
To avoid battery leakage: Do not mix old and new batteries or mix battery types (alkaline, standard or rechargeable batteries) or different brands.
Do not use rechargeable batteries. Non-rechargeable batteries are not to be recharged.
Only batteries of the same or equivalent type as recommended are to be used.
Install batteries with the correct polarity (+ and -).
The supply terminals are not to be short-circuited.
If batteries are loose, bend out the contacts for a tight fit.
Keep loose batteries out of reach of children.
Do not use if battery compartment cover is loose or missing. Keep battery compartment cover secured with screw.
Exhausted batteries are to be removed from toy. Immediately and safely dispose of any used batteries.
Do not dispose of this product in fire, battery inside this product may explode or leak.
When toy is not in use for an extended period of time, remove batteries to prevent possible leakage and damage to the unit.
Check the product periodically for signs of damage to electrical parts; do not play with product until damage has been properly assessed.

HOW TO OPERATE

If the unit malfunctions, please remove the batteries for one minute and reinstall again.
If the malfunctions persist, please replace with new batteries.

MAKE SURE THE BATTERIES ARE PROPERLY INSTALLED AND INSERTED CORRECTLY AND ALWAYS FOLLOW BOTH
THE PRODUCT AND BATTERY MANUFACTURER’S INSTRUCTIONS.
TO ENSURE PROPER SAFETY AND OPERATION, BATTERY REPLACEMENT MUST ALWAYS BE DONE BY ADULT.

Never let a child use this product unless battery door is secured. Batteries are small objects and could be ingested. Keep all batteries away from small children.
Don’t forget to remove batteries from the vehicle and remote control when you have finished operating your vehicle.

All rubber bands, plastic and wire ties, as well as tags, are not part of this toy and should be discarded for your child’s safety.
Remove wire ties before giving toy to child. Please keep packaging/instructions for future reference. Color, contents and designs may vary.

Warning : Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC STATEMENTS

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

FCC Compliance: This equipment has been tested and found to comply with the limits for a Class B digital device. If this equipment causes harmful interference to radio or television reception, try reorienting or relocating the receiving antenna, increasing the separation between the equipment and receiver, connecting the equipment to a different circuit, or consulting a dealer or experienced radio/TV technician for assistance.