TOYMAZING RC Spinning Stunt Vehicle Instruction Manual

: June 29, 2024
: TOYMAZING

Table of Contents

TOYMAZING RC Spinning Stunt Vehicle
Specifications
Product Usage Instructions
FAQs
BATTERY REPLACEMENT
REMOTE CONTROL
BATTERY CAUTION
HOW TO OPERATE
MORE INFO
Read User Manual Online (PDF format)
Download This Manual (PDF format)

TOYMAZING RC Spinning Stunt Vehicle

Specifications

Model: SZ24FDS62101012
Dimensions:
- Length: 18.9 cm (7.44 inches)
- Width: 13.4 cm (5.28 inches)
Type: Spinning Stunt Vehicle
Usage: For Land & Water
Control: Remote Controlled
Age Recommendation: 5+
Water Resistance: Yes

Product Usage Instructions

Preparation:
- Before use, ensure the battery cover and related accessories are correctly installed according to the instructions.
- Avoid prolonged soaking in water. Remove the vehicle from the pool when not in use.
- If water enters the product, remove the batteries and allow them to dry before reuse.
Battery Replacement:
- Vehicle:
- Turn the power switch to the OFF position.
- Use a Phillips screwdriver to remove the battery compartment door.
- Replace old batteries with 4 new 1.5V AAA batteries.
- Securely close the battery compartment door.
- Remote Control:
- Use a Phillips screwdriver to remove the battery compartment door.
- Replace old batteries with 2 new 1.5V AA batteries.
- Securely close the battery compartment door.
- If malfunctions occur, try removing and reinstalling the batteries. If issues persist, replace them with new batteries.
Safety Precautions:
- Ensure batteries are properly installed and inserted correctly.
- Battery replacement should be done by an adult for safety.
- Always follow product and battery manufacturer instructions.
- Do not allow children to use the product without secured battery doors.
- Keep batteries away from small children to prevent ingestion.

FAQs

Q: What type of batteries should I use for the vehicle and remote control?
- A: The vehicle requires 4 x 1.5V AAA batteries, while the remote control needs 2 x 1.5V AA batteries. Make sure to use fresh batteries for optimal performance.
Q: How should I handle interference issues with the remote control?
- A: If interference occurs, try reorienting or relocating the receiving antenna, increasing separation between equipment, or connecting to a different outlet. You can consult a professional for further assistance if needed.
Q: What should I do if water enters the product?
- A: In case water enters, remove the batteries and allow them to dry before reusing them to prevent damage.
Q: Can this product be used in both land and water environments?
- A: Yes, this spinning stunt vehicle is designed for both land and water usage. It is water-resistant and can glide across pools.

Great on land or even glides across the pool!

Please install the battery cover and related accessories correctly according to the instructions before putting them into the water to play. Do not soak the toys for a long time. When not playing, please remove them from the pool. If there is water inside the product, the battery should be removed and allowed to dry before reuse.

BATTERY REPLACEMENT

To replace batteries refer to the following directions & illustrations:

VEHICLE

Turn the power switch to the OFF position.
Use a Phillips screwdriver to loosen and remove the battery compartment door as shown.
Remove old batteries and replace them with 4 new 1.5V “AAA” batteries.
Replace the battery compartment door and tighten the screw.

REMOTE CONTROL

Use a Phillips screwdriver to loosen and remove the battery compartment door as shown.
Remove old batteries and replace them with 2 new 1.5V “AA” batteries.
Replace the battery compartment door and tighten the screw.

BATTERY CAUTION

Alkaline batteries are recommended.
To avoid battery leakage: Do not mix old and new batteries or mix battery types (alkaline, standard or rechargeable batteries) or different brands.
Do not use rechargeable batteries. Non-rechargeable batteries are not to be recharged.
Only batteries of the same or equivalent type as recommended are to be used.
Install batteries with the correct polarity (+ and -).
The supply terminals are not to be short-circuited.
If batteries are loose, bend out the contacts for a tight fit.
Keep loose batteries out of reach of children.
Do not use it if the battery compartment cover is loose or missing. Keep the battery compartment cover secured with a screw.
Exhausted batteries are to be removed from the toy. Immediately and safely dispose of any used batteries.
Do not dispose of this product in a fire, the battery inside this product may explode or leak.
When the toy is not in use for an extended period, remove the batteries to prevent possible leakage and damage to the unit.
Check the product periodically for signs of damage to electrical parts; do not play with the product until the damage has been properly assessed.
If the unit malfunctions, please remove the batteries for one minute and reinstall again.
If the malfunctions persist, please replace them with new batteries.

MAKE SURE THE BATTERIES ARE PROPERLY INSTALLED AND INSERTED CORRECTLY AND ALWAYS FOLLOW BOTH THE PRODUCT AND BATTERY MANUFACTURER’S INSTRUCTIONS. TO ENSURE PROPER SAFETY AND OPERATION, BATTERY REPLACEMENT MUST ALWAYS BE DONE BY ADULT.

Never let a child use this product unless the battery door is secured. Batteries are small objects and could be ingested. Keep all batteries away from small children.
Don’t forget to remove batteries from the vehicle and remote control when you have finished operating your vehicle.
Remove all packaging before giving the toy to a child.
Please keep the packaging for future reference. Colour, contents and designs may vary.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used per the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

This device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

Alkaline batteries are recommended.