MINELAB Equinox 700 Metal Detector User Manual
- June 12, 2024
- MINELAB
Table of Contents
MINELAB Equinox 700 Metal Detector
Product Information
- Product Name: 4901-0501-1
- Supported Languages: Russian (RU), Chinese (ZH)
Product Usage Instructions
- Ensure that the device is turned off before starting.
- Connect the USB-A cable to the device.
- Connect the other end of the USB-A cable to a USB-C Micro B port.
- Open the device.
- Place the device underwater, ensuring it remains submerged.
- Press the PARK button to activate the park mode.
- Press the POLE button to adjust the pole settings.
- Use the device to detect and pinpoint gold coins and artifacts.
- Adjust the frequency settings as needed for optimal performance.
- Note that the EQUINOX 900 model supports this feature exclusively.
Please follow these instructions carefully to ensure proper usage of the product. For further assistance or troubleshooting, refer to the complete user manual provided with the product.
This quick guide and complete EQUINOX ® user manual are available for download online.
QUICK START
SEARCH MODES
EQUINOX 900 only
PARK
Great for recreational areas with a lot of waste, including most general
detections.
FIELD
Ideal for detection in historical roles for the widest range of target sizes.
BEACH
For all salt conditions — dry sand, wet sand, surf and underwater.
**GOLD***
To search for gold nuggets in locations of mineralized gold fields.
ASSEMBLY
TIGHTENING THE MECHANISM
If the mechanisms slip or become loose, tighten them.
CHARGING
5-6 HOURS
- Charge your detector with a quality USB charger that has a minimum charging capacity of 2A @ 5V.
- If you use a low-quality charger, there is a risk of USB charging failure.
- Look for the following marks on USB chargers.
3 HODINY
CONTROLS AND DISPLAY
This quick guide and complete EQUINOX ® user manual are available for download online.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>