ZIP IP-PTZ650W Optical Zoom Camera System User Guide
- June 12, 2024
- Zip
Table of Contents
ZIP IP-PTZ650W Optical Zoom Camera System
Product Information
| Product Name | ZULU IP-PTZ650W |
|---|---|
| Trademark | Zip (registered trademark of System Q Ltd) |
| Optical Zoom | 33x |
| Autofocus | Yes |
| Sensor | 5MP (1080p) |
| Rotation Speed | Up to 200 deg/sec |
| Pan Speed | Up to 100 deg/sec |
| Tilt Speed | With onboard features compatible with the Zip NVR and DVR |
Product Usage Instructions
Powering the camera
Option 1: Power the camera from 12V DC / 24V AC (via the 2.1mm Power
Socket). Connection wires – see overleaf.
Option 2: Power the camera using the PoE(48V) RJ45 Socket. When
connecting ZIP PoE NVR, plug the camera directly into the NVR’s built-in PoE
switch. The camera should automatically
become visible after being connected for approximately 2 minutes.
Default login details
- Default IP: 192.168.10.1
- User Name: admin
- Password: 777777
- DHCP: ON
If using a separate PoE switch or an IPmitter (wireless bridge), the camera needs to be manually configured. Scan the QR code to the left for the “how-to” guide. To search for ZIP IP cameras on a network via a Windows PC, use the ZipFinder tool. Visit https://www.softcctv.com/store/Item/Zip-Finder-IPCCTV- Security-Camera-Discovery-Tool for more information.
PTZ Control on a ZIP NVR or DVR
- Click on the image in the Live view
- Click on the PTZ button
Mounting
- Mark the hole positions using the mounting bracket or using the measurements on the diagram to the right.
- Drill the holes and install the wall plugs.
- Feed the PTZ cable loom through the bracket, then secure using the short screws provided. Attach the safety cable from the bracket to the dome.
- Fit the PTZ to the wall using the screws provided. Ensure the PTZ cable enters via a lower position so that water does not run down to the camera.
- Use silicon sealant around the base and where the cable enters the PTZ. The connections for the camera need to be installed in a waterproof box or similar.
Connection Wires
| Wire | Color |
|---|---|
| AUDIO IN | Pink |
| AUDIO OUT | White/Yellow |
| AUDIO GND | Purple |
| RS485+ | White/Brown |
| RS485- | Brown |
| Ground | Yellow/Green |
| ALARM IN | Blue |
| ALARM GND | Green/Purple |
| ALARM OUT+ | Green |
| ALARM OUT- | Grey |
Specifications
| Image Sensor | 1/2.7 Progressive CMOS |
|---|---|
| Resolution | 5MP (2592×1944) |
| Lens Type | Mechanical (True Day-Night) |
| Angle of View | AGC On: Color: 0.005 lux, B/W: 0.0001 lux, 0 lux |
| Video Compression | — |
| Video Output | — |
| Alarm | — |
| Audio (RCA) Connection | — |
| Protocols | — |
| User Logins | — |
| PTZ Control | — |
| IR Range | — |
| Backlight Control | — |
| Pan Range | — |
| Presets | — |
| Preset Speed | — |
| Use Operating Temperature | — |
| Weight | — |
| Input Voltage | — |
All specifications are approximate. System Q Ltd reserves the right to change product specifications or features without notice. Whilst every effort is made to ensure that these instructions are complete and accurate, System Q Ltd cannot be held responsible for any losses, no matter how they arise, from errors or omissions in these instructions, or the performance or non- performance of the equipment referred to.
The ZULU IP-PTZ650W has a 33x optical zoom with auto-focus and a 5MP (1080p) sensor. The PTZ supports 360° endless rotation, up to 200 deg/sec pan speed, and up to 100 deg/sec tilt speed. With onboard features compatible with the Zip NVR and DVR.
Default login details are:
- Default IP 192.168.10.1
- User Name admin
- Password 777777
- DHCP ON
Powering the camera
Option 1 – Power the camera from 12V DC / 24V AC (via the 2.1mm Power
Socket).
Connection wires – see Overleaf
Option 2 – Power the camera using the PoE(48V) RJ45 Socket.
When connecting ZIP PoE NVR plug the camera directly into the NVR built-in PoE
switch. The camera should automatically become visible after being connected
for approximately 2 minutes.
Manually Adding IP Cameras to a ZIP
If using a separate PoE switch or an IPmitter (wireless bridge), the camera
needs to be manually configured, scan the QR code to the left for the “how to
guide”.
Searching via a Windows PC
Use the ZipFinder tool to search for ZIP IP cameras on a network via a Windows
PC. www.softcctv.com/store/Item/Zip-Finder-IP-CCTV-Security-Camera-Discovery-
Tool
Default login details are:
PTZ Control on a ZIP NVR or DVR
- Click on the image in the Live view
- Click on the PTZ button
Mounting
- Mark the hole positions using the mounting bracket or using the measurements on the diagram to the right.
- Drill the holes and install the wall plugs.
- Feed the PTZ cable loom through the bracket, then secure using the short screws provided. Attach the safety cable from the bracket to the dome.
- fit the PTZ to the wall using the screws provided. Ensure the PTZ cable enters via a lower position so that water does not run down to the camera. Use silicon sealant around the base and where the cable enters the PTZ. The connections for the camera need to be installed in a waterproof box or similar.
Connection Wires
Specifications
| Image Sensor | 1/ 2.7” Progressive CMOS |
|---|---|
| Resolution | 5MP (2592×1944) |
| Lens Type | 33X Optical Zoom (4.3mm – 141.9mm) |
| Angle of View | 57° Wide x 2.4° Telephoto |
| Shutter | 1/5 ~ 1/20000s |
| Day/Night | Mechanical (True Day-Night) |
| Min. Illumination | AGC On: Color: 0.005 lux, B/W: 0.0001 lux, 0 lux with IR |
| Video Compression | H.264 / H.265 |
| Video Output | CVBS (Analogue) BNC Output |
| Alarm | 1 Input / 1 Output |
| Audio (RCA) | 1 Input / 1 Output |
| Connection | RJ45 10M / 100M Ethernet PoE |
| Protocols | TCP/IP, HTTP,DHCP, DNS,DDNS,RTSP, PPPoE, SMTP,NTP, UPnP,FTP |
| User Logins | Max 5 Simultaneous User Logins |
| PTZ Control | RS485 or Ethernet PTZ Control |
| IR Range | Up to 150m |
| Backlight Control | BLC / D-WDR |
| Pan Range | 360°endless |
| Presets | 255 |
| Preset Speed | Max. 200°/sec |
| Use | IP66 For External Use |
| Operating Temperature | -30°C~+60°C |
| Weight | Approximately 2kg |
| Input Voltage | PoE (48V) / 24V AC / 12V DC |
All specifications are approximate. System Q Ltd reserves the right to change product specifications or features without notice. Whilst every effort is made to ensure that these instructions are complete and accurate, System Q Ltd cannot be held responsible for any losses, no matter how they arise, from errors or omissions in these instructions, or the performance or nonperformance of the equipment referred to. This symbol indicates that equipment must not be mixed with general household waste. For treatment, recovery, and recycling please return to your local designated WEE/CG0783SS collection point as defined by your local council.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>