BougeRV ROVER 2000 Semi-Solid State Portable Power Station User Manual

BougeRV ROVER 2000 Semi-Solid State Portable Power Station

Product Information

The product is the ROVER 2000, a semi-solid state portable power station manufactured by Mass Power Electronics Inc. It has a net weight of approximately 47 lbs and dimensions of 400270285mm (15.7×10.6x11in). The power station has a capacity of 2008Wh with a voltage of 32.4V and a current of 62AH. It is certified with UN38.3, FCC, PSE, ROHS, and CE.

The ROVER 2000 features multiple output ports including AC(x5), USB-A Qc3.0(x3), USB-C(x3), Cigarette Port & DC5521(x2). It provides a pure sine wave with a total power output of 2200W (surge 4000W for 3 seconds) and a frequency of 50/60 Hz. The USB-A ports provide a voltage of 9V/2A and an output power of 18W. The USB-C ports support a voltage of 20V/5A and a maximum power output of 100W. The Cigarette Port & DC5521 ports have an output voltage of 13.6V/10A, with a total power output of 136W.

The power station also has input ports for charging. It can be charged via AC charge with a voltage of 37.6V/40A and a maximum power input of 1500W. It can also be charged via PV Solar Charge  with a voltage range of 11V-100V and a maximum current of 30A, with a maximum power input of 1500W.

Product Usage Instructions

Before using the ROVER 2000, please read all safety tips, warning messages, terms of use, and disclaimers provided in the user manual and on the product itself. Familiarize yourself with the related regulations in your area and ensure compliant usage of the product.

Package List

Check the packaging and ensure that you have received all the accessories. If any item is missing, contact the customer service at service@bougerv.com. The package should include:

• ROVER 2000 x 1
• AC Charging Cable x 1
• Car Charging Cable (Cigarette to Anderson) x 1
• Solar Charging Cable (MC4 to Anderson) x 1
• User Manual & Warranty Card x 1

Specifications

The ROVER 2000 has the following specifications:

• Net Weight: Approximately 47 lbs
• Dimensions: 400270285mm (15.7×10.6x11in)
• Capacity: 2008Wh
• Voltage: 32.4V
• Current: 62AH
• Certification: UN38.3, FCC, PSE, ROHS, CE

Safety Instructions
The user manual provides safety instructions for usage, disposal guide, storage, and maintenance. Please refer to the manual for detailed safety instructions.

Usage
The usage instructions cover general product usage, smart display usage, charging, and using extra batteries. Refer to the user manual for detailed usage instructions.

Disposal Guide
The disposal guide provides instructions on how to properly dispose of the product. Follow the guide and adhere to the relevant regulations in your area.

Storage & Maintenance
The storage and maintenance section provides guidelines on how to store and maintain the ROVER 2000 for optimal performance and longevity. Follow these guidelines to ensure proper functioning of the product.

Operating Instructions
The operating instructions provide detailed information on the product details, smart display usage, general product usage, charging, and using extra batteries. Refer to the user manual for step-by-step instructions on operating the ROVER 2000.

Troubleshooting
If you encounter any issues with the ROVER 2000, refer to the troubleshooting section of the user manual for possible solutions to common problems.

FAQ
The FAQ section provides answers to frequently asked questions about the ROVER 2000. Check this section for quick answers to common queries.

After-sales Service Guarantee
The user manual provides information about the after-sales service guarantee. If you require any assistance or support with the product, refer to this section for guidance.

If you have any further questions or concerns, contact customer support at +1 408 656 8402 (9AM-6PM PT, Monday-Friday).

Package List

Please check the packaging and make sure you receive all accessories. If any of these are missing, please feel free to contact us at service@bougerv.com.

1. ROVER 2000 *1
2. AC Charging Cable *1
3. Car Charging Cable (Cigarette to Anderson) *1
4. Solar Charging Cable (MC4 to Anderson) *1
5. User Manual & Warranty Card *1

Specifications

Environmental Operating Temperature

Safety Instructions

Usage

1. Do not use the product near a heat source, such as a fire source or a heating furnace.
2. Avoid contact with any liquid. Do not immerse the product in water or get it wet. Do not use the product in rainy or humid environments.
3. Do not use the product in an environment with strong static electricity/magnetic fields.
4. Do not disassemble the product in any way or pierce the product with sharp objects.
5. Avoid using wires or other metal objects that may result in a short circuit.
6. Do not use unofficial components or accessories. If you need to replace any components or accessories, please visit the official BougeRV channels to check relevant information.
7. When using the product, please strictly follow the operating environment temperature specified in this user manual. If the temperature is too high, it may result in a fire or explosion; if the temperature is too low, the product performance may be severely reduced, or the product may cease to work.
8. Do not stack any heavy objects on the product.
9. Do not lock the fan forcibly during use or place the product in an unventilated or dusty area.
10. Please avoid impact, falls, or severe vibrations when using the product. In case of a severe external impact, turn off the power supply immediately and stop using the product. Ensure the product is well fastened during transportation to avoid vibrations and impacts.
11. If you accidentally drop the product into the water during use, please place it in a safe open area, and stay away from it until it is completely dry. The dried product should not be used again. If the product catches fire, we recommend that you use the fire extinguishers in the following order: water or water mist, sand, fire blanket, dry powder, and finally a carbon dioxide fire extinguisher.
12. Use a dry cloth to clean off dirt on the product ports.
13. Rest the product on a flat surface to avoid damages caused by the product falling over. If the product is overturned and severely damaged, turn it off immediately, place the battery in an open area, keep it away from combustible matter and people, and dispose of it by local laws and regulations.
14. Ensure that the product is kept out of reach of children and pets.
15. Store the product in a dry and ventilated place.
16. It is recommended to use moisture barrier bags in wet environments (for example, places by the sea or waterways) to prevent the product from getting soaked. If water is found inside the product, it must not be used or turned on again. Please take anti-electric shock measures before touching the product. Following this, place the product in a safe, waterproof, and open area. Once complete contact BougeRV Customer Service immediately.
17. This product is not recommended for powering medical emergency equipment related to personal safety, including but not limited to medical grade ventilators (hospital version CPAP: Continuous Positive Airway Pressure), artificial lungs (ECMO, Extracorporeal Membrane Please follow your doctor’s instructions and consult with the manufacturer for restrictions on the use of the equipment. If used for general medical equipment, please be sure to monitor the power status to ensure that the power does not run out.
18. When in use, power supply products will generate electromagnetic fields, which are likely to affect the normal operation of medical implants or personal medical equipment such as pacemakers, cochlear implants, hearing aids, defibrillators, etc. If these types of medical equipment are being used, please contact the manufacturer to inquire about any restrictions on the use of such equipment. These measures are fundamental to ensure a safe distance between the medical implants (for example, pacemakers, cochlear implants, hearing aids, defibrillators, etc.) and this product while in use.

Disposal Guide

1. If conditions permit, make sure that the battery is fully discharged before disposing of it in a designated battery recycling bin. The product contains batteries with potentially dangerous chemicals, so it is strictly prohibited to dispose of it in ordinary trash cans. For more details, please follow the local laws and regulations on battery recycling and disposal.
2. If the battery cannot be fully discharged due to a product failure, please do not dispose of the battery directly in the battery recycling box. In such a case, you should contact a professional battery recycling company for further processing.
3. Please dispose of over-discharged batteries that cannot be recharged.

Storage & Maintenance

1. Ideally, use and store the product between 15°C -35°C (59°F – 95°F), and always keep it away from water, intense heat, and sharp objects. Do not store in temperatures above 40°C (104°F) or below 0°C (32°F) for an extended period.
2. Storing a battery with a low charge for a long period shortens its lifespan. ROVER 2000 mitigates the damage by putting the battery into hibernation mode. To get the most out of the battery, make sure it is about 60% before putting ROVER 2000 into long-term storage, and then once every three months, discharge the battery to 30% and recharge it back to 60%.

Operating Instructions

Product Details

Smart Display

General Product Usage

Long press for more than 2s to turn on/off ROVER 2000, short press to wake up/turn off the screen. (After turning on the power, the other four buttons can be turned on normally.)

Press 1s to turn on/off the DC port.

Press 1s to turn on/off the USB port.

Long press 2s turn on/off the LED light. Short press 1~6 times (screen-ambient light full bright/ screen-ambient light half bright/ flashlight full bright/ flashlight half bright/ SOS model/ all lights off.)

Press 1s to turn on/off the AC port.

Display Screen
Whether your are charging or discharging, the screen will turn off automatically after 30s. Short press any five buttons can wake up the display screen.
ECO Function
When the AC output is lower than 5w for 24 hours, AC modules will turn off automatically.
DC & USB have no Eco function.

Alarm Function
All abnormal states are accompanied by error codes or buzzer warnings. ROVER 2000 can resume work after the abnormality is canceled automatically.

Charging

AC Charging
ROVER 2000 supports 1500W AC input, and the product will be fully

Please use BougeRv AC charging Cable for fast charging. Bougerv takes no responsibility for any consequences caused by failures to follow instructions, including but not limited to charging with AC charging cable.

PV Charging
Users can connect solar panels in series or in parallel as shown in the picture to charge the product. The product supports 11-100V DC input, 35A max current, and 1500W max charging power.

OUTDOOR

HOME

When using a BougeRV solar panel to charge the product, please follow the instructions that come with the solar panel. Before connecting the solar panel, please ensure that the solar panel’s output voltage is within 100V to avoid product damage.
More models: Yuma 100, Yuma 200, Paso 100, Paso 200, etc.

Car Charging
Users can recharge the product through the Car Charging Input Port. It supports 12V car chargers and an 10A default charging current.

Please charge using the car charger after you’ve started the car to avoid failure to start due to an insufficient car battery. In addition, please make sure that Car Charging Input Port and the Car Charging Cable are in good condition. BougeRV takes no responsibility for any losses or damages caused by failure to follow instructions.

Extra Battery

The product can be connected with up to 3 Extra Batteries at the same time to meet higher capacity needs. Please refer to the user manuals of ROVER 2000 Extra Battery.
Extra Battery, please follow the instructions below:

1. Before connecting the product to a Extra Battery, please make sure that both the product and the Extra Battery are turned off.
2. After connecting the product to a Extra Battery, please make sure that both of their LCD screens display an battery icon before using it.
3. Do not directly connect or remove the Extra Battery during charging and discharging processes. If you need to connect or remove it midway, please turn off the product first.
4. Do not touch the metal terminals of the Extra Battery connector with your hands or other objects. If foreign objects adhere to the metal terminals, please gently wipe them with a dry cloth.

Troubleshooting

Error Code & Troubleshooting

Module| Error Code| Explanation| Troubleshooting

INVERTER

| ****

E01:

Overload Protection

| When the output power exceeds 2640W for 30 seconds, the inverter shuts down, the overload character flashes, and the buzzer alarms; when the output power exceeds 3300W for 10 seconds, the inverter shuts down, the overload character flashes, and the buzzer alarms; the output power exceeds 4000W for 3 seconds Seconds, the inverter shuts down, the overload character flashes, and the buzzer alarms.| ****

When the code appears, please cut off the appliance in time, the error will disappear immediately.

E02:

Over Temperature Protection

| Cut off the output when the temperature is above 176°F, and automatically recover when the temperature is below 140°F.| ****

Please discharge under the suitable temperature environment (32°F to 104°F).

E03:

Over/Under Voltage Protection

| ****

When the voltage of the inverter is over 140V or below 90V, it will turn off.

| Step 1: Turn on the power station again and observe whether the error code is canceled.

Step 2: Please contact our customer service if the code still exists.

E04:

Short Circuit Protection

| ****

ROVER 2000 detects that there is a short circuit in the electrical appliance.

| Step 1: Cut off the output immediately. Step 2: Turn on the power station again and observe whether the error code is canceled.

Step 3: Please contact our customer service if the code still exists.

INVERTER

| ****

E05:

AC Under Voltage Protection

| ****

The voltage of AC is below 93V.

| Please use the AC charging cable and compliant outlet provided by us for charging, and do not modify the charging cable and outlet without the guidance of a professional electrician.
---|---|---|---

PV

| ****

P01:

Over /Under voltage Protection

| ****

When the PV input voltage is over 120V or less than 10V, turn off the PV input.

| Please check whether the voltage is too high due to too many panels connected in series. If you use a single panel to charge, please make sure the voltage is over 10V.

P02:

Over current Protection

| ****

When the PV input current is over 45A, it will turn off the PV input.

| Please check whether the parallel connection of multiple panels leads to excessive current. It is recommended to increase the series connection and reduce the parallel connection.

P03:

Overheating Protection

| ****

When the temperature of the PV module is over 158°F, it will turn off the PV input.

| Step 1: Stop charging and observe whether the error code disappears after the temperature drop.

Step 2: Please contact our customer service if the code still exists.

AC

| C01:

Overcurrent Protection

| When the AC charging current is over 45A, turn off the input.| The fuse will pop up automatically. If you want to continue charging, please press the fuse button.

C02:

Overheating Protection

| Cut off the input when the temperature is above 167°F, and automatically recover when the temperature is below 131°F.| ****

Please charge it under a suitable temperature environment (32°F to 104°F).

FAQ

Q1: What are the advantages of semi-solid batteries over LFP batteries?

A:

1. Excellent low-temperature charge and discharge performance can be used for normal discharge at 14°F.
   It has a high energy density of 260Wh/kg. With the same capacity, it is half the weight of LiFePO4 and has the same safety performance and cycle life as LiFePO4.

Q2: Does ROVER 2000 have EPS function?
A: With excellent EPS function, the switching time is less than 20ms, which meets the load requirements of sensitive electrical appliances.

Q3: Which devices can be powered by the AC outlet of the product?
A: The rated power of the product is 2200W, the peak power is 4000W (3 seconds), and the AC output port can supply power for most household appliances.

Q4: Are there any precautions for connecting the extended battery pack?
A: When the number of connected battery packs appears in the area above the power display, it means the expansion is successful.

Q5: How to use ROVER 2000 as an uninterruptible power supply in the environment of long-term power failure?
A: ROVER 2000 supports a maximum photovoltaic input of 1500W, a wide voltage range of 10-100V and a maximum current of 30A. We recommend that you purchase a solar panel pack (8pcs 200W solar panels) as a supplementary energy solution during power outages.

Q6: Does ROVER 2000 have energy-saving protection settings? Will this function turn off the appliance by mistake?
A: The DC output has canceled the energy-saving protection. When you use a DC appliance such as a car refrigerator, you don’t need to worry about turning it off by mistake. The AC output retains the energy-saving protection due to its high power consumption.

Q7: There is no wheel design. I am worried that it will be inconvenient for long-distance transportation. Do you have matching storage bags and carts for sale?
A: We have put special waterproof storage bags and trolleys on the shelves according to your needs, and you can enter our store to buy them.

After-sales Service Guarantee

Maintenance service process

STEP1:
Start a repair request

Contact BougeRV customer support by phone or email.
Please attach the order number, detailed condition pictures and defective parts, we will be able to reply smoothly.

STEP2:
Send your product to the repair centre

Please put the product in the carton and send it to repair centre.

STEP3:
Check the product

Check product and accessories received. The repairman will check for the symptom you indicated.

STEP4:
Diagnose and repair products

We will determine the location of the fault and the parts that need to be replaced, and make repairs.

STEP5:
Resend the repair product

We will deliver the product as soon as the repair is completed.
About delivery time: It takes about 1 to 2 weeks after the product arrives at our company.

Limited Warranty
BougeRV provides 5 years warranty for customers who purchase on Amazon and the BougeRV official website.

Warranty Period
The warranty is measured starting on the date of purchase by the original purchaser. To establish the start of the warranty period, the purchaser must provide a screenshot of the order from amazon or the website.

Tips
If there is any problem with the product, you can provide us with pictures and videos for identification. After the confirmation of the technicians, we will provide return and exchange services with you.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequence energy and,if not installed and used in accordance with the instructions,may cause harmful interference to radio communications.However,there is no guarantee that interference will not occur in a particular installation.if this equipmemt does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an autlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment should be installed and operated with a minumum distance of 20 cm between the radiator and your body.

ISED Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.
This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>