HAGOR 46-65 CPS Menuboard D2P User Manual
- June 12, 2024
- HAGOR
Table of Contents
HAGOR 46-65 CPS Menuboard D2P
Product Information
- Product Name: CPS Menuboard D2P 46 – 65
- Model Number: 3316
Product Usage Instructions
- Before starting the installation, please read and understand the cautionary notes provided in the user manual.
- Ensure that you handle the components carefully during installation to avoid any damage.
- If necessary, protect the components during installation to prevent any potential damage.
- Secure the installation area properly to prevent falling parts that may cause injuries or material damage.
- Check if the materials included in the package are suitable for the specific conditions at the installation site. If not, replace them with appropriate materials.
- If you have any doubts or questions regarding the installation process, it is recommended to contact the manufacturer or trained specialists for assistance.
- Refer to the “Lieferumfang” section in the user manual to identify all the components included in the scope of delivery.
- Follow the provided installation diagram and use the respective components (A, B, C, D, E, F-1, F-2, G, H, I, J, K, L, M, N, O, P, Q, R, S, T, U, Vierkantscheibe washers, Distanzring) as indicated.
- Use the specified screws (M8x10, M8x12, M8x80, M5x14, M6x14, M6x30, M8x30, M8x50) for securing different parts of the product.
- Ensure that the arrow on the product is pointing upwards during installation.
- If applicable, use the optional secure part for tilt arms (Art.-Nr.: 3227) as per the provided instructions.
- Verify the VESA compatibility of your TV and adjust the mounting accordingly (min. 100 – max. 600mm or min. 200 – max. 400mm).
- Refer to the “Abmessungen | Dimensions” section for specific measurements related to the product.
Caution!
- Technical devices are of considerable value. You should therefore handle the components carefully during installation and protect them if necessary.
- If necessary, the installation area should also be secured. Falling parts can cause injuries and material damage.
- The materials included in the scope of delivery may not be suitable for the special conditions at the installation site. Please check this in advance and replace it with suitable materials if necessary.
- If you are unsure about the installation of the product or have any questions, please contact us or other trained specialists.
Scope of delivery
INSTALLATION
- Choose the appropriate screws, washers, and spacers (if necessary) according to the type of screen.
- Center the adapter brackets on the back of the display as shown, and screw the brackets onto the display, being sure to not over-tighten.
20° is the natural angle and the safety pin is unnecessary
Optional SECURE PART FOR TILT ARMS SERIES
Dimensions
HAGOR Products GmbH | Oberbecksener Straße 97 D-32547 Bad Oeynhausen | Telefon: +49(0)57 31-7 55 07-0 | Mail: [email protected]
Read User Manual Online (PDF format)
Loading......