WINNCARE e-Station Moving and Handling User Manual
- June 12, 2024
- WINNCARE
Table of Contents
WINNCARE e-Station Moving and Handling User Manual
Charging one Luna
Charging two Luna simultaneously
+
Verify installation
| To do: | Charger light identification: | Not charging: |
|---|---|---|
| Move the Luna into the e- Station. | Green diode = Fully charged | |
| Red diode = Charging | If the diode doesn’t change from green to red, while |
moving the Luna up and down.
See Troubleshooting.
Troubleshooting
| Description: | Error: | Solution: |
|---|---|---|
| No light indication on the charger. | Charger is not connected to the main | |
| supply. | Connect charger to the main supply. | |
| Luna not charging. Charger light indication is on. | Conductor kit’s polarity | |
| is not the same, for both the e- Station and the cart. | See installation guide |
– Conductor kit alignment.
Damaged/dirty conductor wheels.| See annual service.
Annual service
Manufacturer:
Winncare Nordic ApS
Taarnborgvej 12C
4220 Korsoer
Denmark
www.winncare.com
Distributor/service:
Date: 05.10.2021
Version: 1
UM-910-09000
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>