HAGOR 32-43-VESA 200 CPS Menuboard W4L Instructions
- June 12, 2024
- HAGOR
Table of Contents
HAGOR 32-43-VESA 200 CPS Menuboard
Product Information
The product is the CPS Menuboard W4L 32 – 43 VESA 200 (Art.-Nr.: 3321). It is a technical device that requires careful handling during installation to protect its components. The installation area should also be secured to prevent injuries and material damage. It is important to check if the materials included in the scope of delivery are suitable for the installation site and replace them if necessary. If unsure about the installation or have any questions, it is recommended to contact the manufacturer or other trained specialists.
Caution!
- Technical devices are of considerable value. You should therefore handle the components carefully during installation and protect them if necessary.
- If necessary, the installation area should also be secured. Falling parts can cause injuries and material damage.
- The materials included in the scope of delivery may not be suitable for the spe-cial conditions at the installation site. Please check this in advance and replace it with suitable materials if necessary.
- If you are unsure about the installation of the product or have any questions, please contact us or other trained specialists.
Scope of Delivery
- A: 3x
- B: 1x
- C: 2x
- D: 6x
- E: 9x
- F: 36x
- G: 2x
- H: M8x10 2x
- I: 14x
- J: M8x12 12x
- W-A: 12x
- W-B: 12x
- W-C: 12x
- K: 3x
- M5x14: 16x
- M-A: M6x14 16x
- M-B: M6x30 16x
- M-C: M8x30 16x
- M-D: M8x50 16x
- L: 8x
- Vierkantscheibe washers: 16x
- M-F
- Distanzring, klein small spacers
- M-G
- M-H
TOOLS REQUIRED
INSTALLATION
- Choose the appropriate screws, washers and spacers (if necessary) according to the type of screen.
- Center the adapter brackets on the back of the display as shown, and screw the brackets onto the display, being sure to not over-tighten.
Optional | SECURE PART FOR TILT ARMS SERIES | Art.-Nr.:
3227
Dimensions
The dimensions of the product are as follows:
- Width: 240 mm
- Height: 1000 mm
- T/D: 210 mm
- Length: 1000 mm
- VESA 200: 3509 mm
- VESA 200: 120 mm
- Depth: 500 mm
Product Usage Instructions
- Ensure that the installation area is secure and suitable for the product.
- Handle the components carefully during installation to avoid damage.
- If necessary, replace any unsuitable materials included in the scope of delivery with suitable alternatives.
- Follow the provided diagram for the correct arrangement of the components.
- Ensure that the arrow on the TV points upwards during installation.
- Cable management is possible on both sides of the rail.
- If using the optional secure part for tilt arms series (Art.-Nr.: 3227), follow the additional instructions provided.
HAGOR Products GmbH
D-32547 Bad Oeynhausen
Telefon: +49(0)57 31-7 55 07-0
Mail: [email protected]