hama PP-245 Radio Controlled DCF Wall Clock Instruction Manual
- June 12, 2024
- Hama
Table of Contents
- hama PP-245 Radio Controlled DCF Wall Clock
- Product Information
- Controls and Displays
- Explanation of Warning Symbols and Notes
- Package Contents
- Safety Instructions
- Getting Started
- Installation
- Operation
- Care and Maintenance
- Warranty Disclaimer
- Technical Data
- Declaration of Conformity
- Contact
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
hama PP-245 Radio Controlled DCF Wall Clock
Product Information
The Radio-Controlled DCF Wall Clock is a wireless wall clock manufactured by Hama. It operates using a single AA battery (1.5V) and features a radio- controlled DCF clock that automatically sets the time based on the radio signal it receives. The clock also includes additional features such as displaying the day, month, day of the week, moon phase, room temperature, time zone, and battery charge level.
Controls and Displays
- AM/PM (12-hour format)
- Time
- Day
- Month
- Day of the week
- Moon phase
- Room temperature
- Time zone
- Summer time
- Battery symbol
- Wireless symbol
- Opening for wall mounting
- Base
- MODE button
- settings/confirms the setting
- °F/°C button
- switches between °C and °F
- UP button
- increases the current setting; activates/deactivates manual radio signal reception; switches the display mode
- DOWN button
- decreases the current setting; activates/deactivates manual radio signal reception; selects the language
- Battery compartment
Thank you for choosing a Hama product.
Take your time and read the following instructions and information completely.
Please keep these instructions in a safe place for future reference. If you
sell the device, please pass these operating instructions on to the new owner.
Explanation of Warning Symbols and Notes
Warning
- This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.
Note
- This symbol is used to indicate additional information or important notes.
Package Contents
- PP-245 DCF wireless wall clock
- 1 AA battery
- These operating instructions
Safety Instructions
- The product is intended for private, non-commercial use only.
- Use the product for its intended purpose only.
- Protect the product from dirt, moisture and overheating, and only use it in a dry environment.
- Do not operate the product outside the power limits given in the specifications.
- Do not use the product in moist environments and avoid splashes.
- Do not use the product in the immediate vicinity of heaters or other heat sources or in direct sunlight.
- Do not use the product in areas where the use of electronic devices is not permitted.
- Do not place the product near interference fields, metal frames, computers, TVs, etc.
- Electronic devices and window frames can negatively affect the product’s functionality.
- Do not drop the product and do not expose it to any major shocks.
- Do not open the device or continue to operate it if it becomes damaged.
- Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.
- Keep the packaging material out of the reach of children due to the risk of suffocation.
- Dispose of packaging material immediately according to locally applicable regulations.
- Do not modify the product in any way. Doing so voids the warranty.
- Keep this product, as all electrical products, out of the reach of children!
- Use the item only in moderate climatic conditions.
Warning: Batteries
- When inserting batteries, note the correct polarity (+ and – markings) and insert the batteries accordingly. Failure to do so could result in the batteries leaking or exploding.
- Only use batteries (or rechargeable batteries) that match the specified type.
- Before you insert the batteries, clean the battery contacts and the polar contacts.
- Do not allow children to change batteries without supervision.
- Do not mix old and new batteries or batteries of a different type or make.
- Remove the batteries from products that are not being used for an extended period (unless these are being kept ready for an emergency).
- Do not short-circuit batteries.
- Do not charge batteries.
- Do not throw batteries in a fire.
- Keep batteries out of the reach of children.
- Never open, damage or swallow batteries or allow them to enter the environment.
- They can contain toxic, environmentally harmful heavy metals.
- Immediately remove and dispose of dead batteries from the product.
- Avoid storing, charging or using the device in extreme temperatures and extremely low atmospheric pressure (for example, at high altitudes).
Getting Started
Inserting the battery
Remove the battery that was already inserted into the clock, remove the protective film if necessary as well as the contact interrupter and re-insert the battery with the correct polarity. The clock is ready for operation.
Replacing the battery
- Remove and dispose of any used batteries. Insert the new battery (AA).
- Ensure that the polarity of the battery corresponds to the symbols in the battery compartment (18).
Installation
Warning: Mounting Note
- Before mounting the clock, ensure that the chosen wall is suitable for the weight to be mounted, and make sure that there are no electrical wires, water, gas or other lines at the installation site on the wall.
- Purchase special fastening materials from specialised dealers.
- Do not mount the product above locations where persons might linger.
- You can mount the wall clock on a wall using the opening on the back (12).
- You can also stand the wall clock on a level surface using the base (13).
Operation
Note: Input
- Hold down the UP button (16) or the DOWN button (17) to select the values faster.
Automatic setting using the DCF signal
- Once the batteries are inserted, the clock automatically searches for a DCF signal. During the search, the wireless icon (11) flashes.
Display | Searching for the DCF signal |
---|---|
Display flashing | Active |
Displayed continuously | Successful – signal is being received |
Not displayed | Deactivated |
- If the station still does not receive a signal, press and hold the UP button (16) and the DOWN button (17) for approx. 3 seconds to start the manual search for the DCF signal. The wireless icon (11) will start to flash.
Note: Time settings
- The search process takes about 3-10 minutes. If the search fails, it ends and is repeated at the next clock hour. The wireless icon (11) disappears.
- In the meantime you can, however, set the time and the date manually.
- The clock automatically continues to search for the DCF signal on a daily basis (between 1:00 a.m. and 5:00 a.m.). If the signal is received successfully, the manually-set time and date are overwritten.
Note: Summer time
The clock automatically switches to summer time. S (9) appears on the display as long as summer time is activated.
- Press and hold the UP button (16) and the DOWN button (17) again for approx. 3 seconds to stop the manual search.
(Manual) settings
- Press and hold the UP button (16) and the DOWN button (17) for approx. 3 seconds to stop the search for the DCF signal. The wireless icon (11) disappears and you can set the time manually
- Press and hold the MODE button (14) for approx. 3 seconds to make the following settings one after the other:
- Hours (2)
- Minutes (2)
- Year (2)
- Month (4)
- Day (3)
- To select individual values, press the UP button (16) or the DOWN button (17) and confirm each selection by pressing the MODE button (14).
- While you are setting the minutes or seconds, press the °F/°C button (15) to switch between the 12-hour (a.m./p.m.) and 24-hour formats.
- If you do not make an entry for 10 seconds, you automatically exit the setup mode.
- Press and hold the DOWN button (17) until the desired language for the week display (5) appears.
Note: Day of the week
- You can choose from English (GB), French (FR), German (DE), Spanish (ES), Dutch (DU) and Italian (IT) for the display of the day of the week.
Time zone
_ Note: _Time zone
- The DCF signal can be received over long distances, but always transmits the current Central European Time in Germany. Make sure you account for the time difference in countries with another time zone.
- If you are in Moscow, the time is 3 hours later than in Germany. This means that you should set +3 for the time zone. The clock then automatically sets the time to 3 hours after the DCF signal received or relative to the manually set time.
- Press and hold the UP button (16) for approx. 3 seconds to display the time in a different time zone. The time zone icon (8) is displayed.
- Press and hold the MODE button (14) for approx. 3 seconds to set the required time zone difference. The hours display (2) begins to flash.
- To select the time difference (+/- 12 hours), press the UP button (16) or the DOWN button (17) and confirm each selection by pressing the MODE button (14).
- If you do not make an entry for 10 seconds, you automatically exit the setup mode.
- Press and hold the UP button (16) for approx. 3 seconds to return to the normal time display
Celsius / Fahrenheit
- Press the °F/°C button (15) to choose between °C and °F for the temperature display.
Moon phases
The clock indicates the current moon phase (6) with the following icons.
Low battery charge
- When the battery icon (10) appears on the display, the battery charge is very low. Replace the battery immediately.
Care and Maintenance
- Only clean this product with a slightly moist, lint-free cloth, and do not use aggressive cleaning agents.
- Make sure that water does not get into the product.
Warranty Disclaimer
Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.
Technical Data
**** | PP-245 DCF wireless wall clock |
---|---|
Power supply | 1.5 V |
1 AA battery
Measuring range Temperature| 0°C – +50°C/ 32°F – 122°F
Radio-controlled DCF clock| Yes
Thermometer| Yes
Declaration of Conformity
Hereby, Hama GmbH & Co KG declares that the radio equipment type [00186383, 00104936] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.hama.com-> 00186383, 00104936 -> Downloads.
- Frequency band(s): 77.5 kHz
Contact
Hama GmbH & Co KG
- 86652 Monheim / Germany
Service & Support
- www.hama.com
- +49 9091 502-0
All listed brands are trademarks of the corresponding companies. Errors and omissions excepted, and subject to technical changes. Our general terms of delivery and payment are applied.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>