greenworks pro MO80L06 Lawn Mower User Manual
- June 1, 2024
- Greenworks
Table of Contents
- GreenWorks pro MO80L06 Lawn Mower
- Product Usage Instructions
- DESCRIPTION
- PACKING LIST
- READ ALL INSTRUCTIONS
- SERVICE/MAINTENANCE
- SYMBOLS ON THE PRODUCT
- ENVIRONMENTALLY SAFE BATTERY DISPOSAL
- INSTALLATION
- UNPACK THE MACHINE
- PLACE THE MOWER UPRIGHT IN VERTICAL POSITION
- OPERATION
- MAINTENANCE
- TROUBLESHOOTING
- TECHNICAL DATA
- LIMITED WARRANTY
- EXPLODED VIEW
- Documents / Resources
GreenWorks pro MO80L06 Lawn Mower
Specifications
- Model: MO80L06 / MO80L411
- Brand: Greenworks
- Usage: Domestic lawn mowing
- Features: Self-propel drive system, LED Headlights, Height adjustment lever
Product Usage Instructions
Installation
- Unpack the machine carefully.
- Place the mower upright in a vertical position.
- Unfold the lower handle.
- Install the grass catcher securely.
- Install the mulch plug if needed.
- Attach the side discharge chute.
- Adjust the cutting height as desired.
- Install the battery pack properly.
- To remove the battery pack, follow the instructions provided.
Operation
- To start the machine, press the start button and hold the start handle.
- To stop the machine, release the start handle.
- Engage the self-propel drive system by using the lever.
- Turn on the LED Headlights if mowing in low-light conditions.
- Regularly empty the grass catcher during operation.
- Operate on slopes carefully, following safety guidelines.
- Refer to the operation tips for efficient mowing.
Maintenance
- Perform general maintenance tasks regularly.
- If needed, replace the blade following the manufacturer’s instructions.
- Store the machine in a dry and secure place after use.
- For space-saving, consider vertical storage options.
FAQ
Q: How do I adjust the cutting height of the mower?
- A: To adjust the cutting height, locate and use the height adjustment lever provided on the mower.
- Move it to your desired cutting height setting.
Q: Can I use this mower for commercial purposes?
- A: No, this mower is designed for domestic lawn mowing only.
- Avoid using it for commercial applications to maintain its performance and longevity.
DESCRIPTION
PURPOSE
This machine is used for domestic lawn mowing. The cutting blade should be parallel to the ground. All four wheels must touch the ground while mowing.
OVERVIEW
- Start button
- Start handle
- Self-propel drive lever
- Upper handle
- Lower handle
- Grass catcher
- Rear discharge door
- Height adjustment lever
- Side discharge cover
- LED Headlight
- Mulch plug
- Side discharge chute
PACKING LIST
- Lawnmower
- Grass catcher
- Side discharge chute
- Manual
READ ALL INSTRUCTIONS
DANGER
- This machine was built to be operated according to the rules for safe operation included in this manual. As with any type of power equipment, carelessness or error on the part of the operator can result in serious injury.
- This machine is capable of amputating hands and feet and throwing objects.
- Failure to observe all safety instructions could result in serious injury or death.
WARNING
- When using electric lawnmowers, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury. These basic precautions include the following:
CHILDREN AND BYSTANDERS
- Tragic accidents can occur if the operator is not alert to the presence of children or bystanders.
- Keep the area of operation clear of all persons, particularly small children, and pets.
- Use extreme care when approaching blind corners, doorways, shrubs, trees, or other objects that may obscure your vision of a child or bystander. Keep children, bystanders, helpers, and pets at least 100 feet (30m) from the mower while it is in operation.
- Stop the machine if anyone enters the area.
- Never allow children under 14 years old to operate a power mower. Operators 14 years old and over should fully read and understand the operator’s manual and safety rules.
- Only responsible individuals who are familiar with these rules of safe operation should be allowed to use this machine.
GENERAL OPERATION
- Read this operator’s manual carefully in its entirety before assembling or operating this machine. Read, understand, and follow all instructions on the machine and in the manuals before operation.
- Familiarize yourself with the controls and proper use of this machine before operation. Save this manual for future and regular reference.
- Do not use the lawn mower for any job except that for which it is intended. Your lawn mower has been designed to perform only one job: cut grass.
- Never attempt to make a wheel height adjustment while the motor is running.
- Don’t force the lawn mower; it will do the job better and more safely at the rate for which it was designed.
- Don’t overreach, keep proper footing and balance at all times. Many injuries occur as a result of the mower being pulled over the foot during a fall caused by slipping or tripping.
- A slip and fall can cause serious personal injury. If you feel you are losing your footing, release the control handle immediately and the blade will stop rotating within three seconds.
- Thoroughly inspect the area where the mower is to be used and remove all stones, sticks, wires, dog bones, and other foreign objects.
- Prevent unintentional starting. Ensure the switch is in the off position before connecting to the battery pack, picking up, or carrying the mower.
- Carrying the mower with your finger on the switch or energizing the mower that has the switch on invites accidents.
- Never pull the mower back toward you while you are walking. If you must back the mower away from a wall or obstruction, first look down and behind you to avoid tripping, and then follow these steps:
- Step back from the mower to fully extend your arms.
- Be sure that you are well-balanced.
- Pull the mower back slowly.
- Remove the battery pack from the mower before making any adjustments, changing accessories, or storing appliances. Such preventive safety measures reduce the risk of starting the mower accidentally.
- Before and while moving backward with the mower, look behind and down for small children and other people.
- Do not operate the mower while under the influence of alcohol or drugs. Stay alert and watch what you are doing at all times. Use common sense and do not operate the lawn mower when you are tired.
- Always wear safety glasses or safety goggles during operation and while performing an adjustment or repair to protect your eyes. Thrown objects that ricochet can cause serious injury to the eyes. Always use a face or dust mask if the operation is dusty.
- Keep clear of the discharge opening at all times. Do not put hands or feet near rotating parts or under the cutting deck. Contact with the blade can amputate hands and feet.
- Plan your mowing pattern to avoid the discharge of material toward roads, sidewalks, bystanders, and the like. Also, avoid discharging material against walls or obstructions, which may cause discharged material to ricochet back toward the operator.
- To help avoid the blade or an injury from a thrown object, stay in the operator zone behind the handles.
- A missing or damaged discharge cover can cause blade contact or injuries from thrown objects.
- Objects struck by the lawn mower blade can cause severe injuries to persons. The lawn should always be carefully examined and cleared of all objects before each mowing.
- Stop the blade when crossing gravel drives, walks, or roads.
- Follow all charging instructions and do not charge the battery pack or mower outside of the temperature range specified in the instructions.
- Charging improperly or at temperatures outside of the specified range may damage the battery and increase the risk of fire.
- If lawn mower strikes a foreign object, follow these steps:
- Release the bail switch to disengage the motor.
- Remove the battery.
- Inspect for damage.
- Repair any damaged parts before restarting and operating the lawn mower.
- Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.
- Dress properly; do not wear loose clothing or jewelry that can be caught in moving parts. The use of safety gloves and proper footwear is recommended when working outdoors. Wear sturdy, rough-soled work shoes and close-fitting slacks and shirts. Shirts and pants that cover the arms and legs and steel-toed shoes are recommended. Never operate this machine in bare feet, sandals, slippery, or lightweight (e.g., canvas) shoes.
- Do not modify or attempt to repair the mower or the battery pack (as applicable) except as indicated in the instructions for use and care.
- Wear a protective hair covering to contain long hair.
- Avoid dangerous environments; do not use the lawn mower in damp/wet locations or if it is raining.
- Store idle lawnmowers indoors. When not in use, appliances should be stored indoors in dry, and high or locked-up places – out of reach of children. Always remove the battery from the mower before storing it.
- Mow only in daylight or good artificial light. Walk, never run while operating.
- If the mower should start to vibrate abnormally, immediately stop the motor, remove the battery, and check for the cause. Vibration is generally a warning that the mower is not functioning properly.
- Check bags frequently for deterioration and wear, and replace worn bags. Check that replacement bags comply with the original manufacturer’s recommendations or specifications.
- Before cleaning the mower, unclogging or removing the grass bag, mulching insert, or side discharge chute, turn the motor off and wait until the blade comes to a complete stop, then remove the battery pack.
- The cutting blade continues to rotate for a few seconds after the motor is shut off. Never perform these functions until you are sure the blade has stopped rotating.
- Keep cutting edges clean and sharp to ensure the best performance.
- Periodically inspect safety devices and cords for damage. If damaged do not operate the unit until it has been repaired by an authorized service professional.
- Never operate the mower without the proper discharge cover, grass bag, mulching insert, side discharge chute, or other safety devices in place and working.
- Never operate the mower with damaged safety devices. Failure to do so can result in personal injury.
- Use only approved batteries and chargers. Non-approved batteries and chargers may cause damage to the mower or injure the operator.
- Do not dispose of the battery in a fire. The cells could catch fire or explode. Check with local codes and waste management for proper disposal instructions.
- When the battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another.
- Shorting the battery terminals together may cause burns or a fire.
- Do not open or destroy the battery. Electrolytes contained within the battery are corrosive and may cause damage to the eyes or skin if released. It may be toxic if swallowed.
- Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts the eyes, additionally seek medical help.
- Liquid ejected from the battery may cause irritation or burns.
- Do not expose a battery pack or appliance to fire or excessive temperature. Exposure to fire or temperature above 130 °C may cause an explosion.
- Exercise care in handling batteries to avoid shortening the battery with conducting materials such as rings, bracelets, keys, etc. The battery or conductor may overheat and cause burns if contact with said materials is made.
- Do not use a battery pack or appliance that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion, or risk of injury.
SERVICE/MAINTENANCE
- Check the blade and the motor (machine) mounting bolts at frequent intervals for proper tightness.
- Replace the blade if it is bent or cracked. An unbalanced blade causes a vibration that could damage the motor drive unit or cause personal injury.
- Keep all nuts, bolts, and screws tight to ensure the equipment is in safe working condition.
- Do not wash with a hose; avoid getting water in motor and electrical connections.
- Never remove or tamper with safety devices. Check their proper operation regularly. Never do anything to interfere with the intended function of a safety device or to reduce the protection provided by a safety device.
- Keep the mower free of grass, leaves, or other debris buildup. Allow the mower to cool before storing.
- Never make any adjustments or repairs with the motor running.
- Always remove battery packs from mowers before adjusting, cleaning, or repairing.
- Check grass catcher components and the discharge guard frequently and replace them with the manufacturer’s recommended parts, when necessary.
- Sharpen a dull blade equally at each end to maintain the balance.
- Keep guards in place and in working order. Mower blades are sharp, and can cut. Wrap the blades or wear gloves, and use extra caution when servicing.
- Clean the blade thoroughly and check its balance by supporting it horizontally on a thin nail through its center hole. The nail should also be in a horizontal position. If either end of the blade rotates downward, remove some metal from the heavy or lower end until the blade is balanced. It is balanced when neither end drops.
- Use identical replacement blades only.
- Maintain lawn mower with care. Keep cutting edges sharp and clean for best and safest performance. Follow instructions for lubricating and changing accessories. Inspect lawn mower cord periodically and if damaged, have it repaired by an authorized service facility.
- If situations occur that are not covered in this manual, use care and good judgment or contact Customer Service for assistance.
- Never operate the mower without proper guards, plates, or other safety protective devices in place.
- Before each use, examine the machine for damaged, missing, or loose parts such as screws, nuts, bolts and caps.
- Tighten correctly all the fasteners and caps.
- Clean the machine with a dry cloth. Do not use water.
The recommended ambient temperature range:
Item | Temperature |
---|---|
Mower storage temperature range | 32°F (0°C) – 113°F (45°C) |
Mower operation temperature range | 32°F (0°C) – 113°F (45°C) |
Battery charging temperature range | 39°F (4°C) – 104°F (40°C) |
Charger operation temperature range | 39°F (4°C) – 104°F (40°C) |
Battery storage temperature range | 32°F (0°C) – 113°F (45°C) |
Battery discharging temperature range | 32°F (0°C) – 113°F (45°C) |
SLOPE OPERATION
- Slopes are a major factor related to slip-and-fall accidents, which can result in severe injury. Operation on slopes requires extra caution. If you feel uneasy on a slope, do not mow it.
Do:
- Mow across the face of slopes; never mow up and down. Exercise extreme caution when changing direction on slopes.
- Watch for holes, roots, rocks, hidden objects, or bumps that can cause you to slip or trip. Tall grass can hide obstacles.
- Remove all obstacles such as rocks and tree limbs.
- Make sure that your footing is stable. If you are out of balance, release the switch immediately.
Do not:
- Mow excessively steep slopes.
- Mow near drop-offs, ditches, or embankments; you could lose your footing or balance.
- Mow slopes greater than 15 degrees.
- Mow on wet grass. Unstable footing could cause slipping.
WARNING
- Do not mow on the slopes with an incline of more than 15°. If you are not comfortable, do not mow on a slope.
- TIP In the case of self-propelled mowers, please keep a low self-propelled speed when you mow on a slope.
SYMBOLS ON THE PRODUCT
- Some of the following symbols may be used on this mower. Please study them and learn their meaning.
- Proper interpretation of these symbols will allow you to operate the mower better and safer.
RISK LEVELS
The following signal words and meanings are intended to explain the levels of risk associated with this product.
ENVIRONMENTALLY SAFE BATTERY DISPOSAL
The toxic and corrosive materials below are in the batteries used in this machine: Lithium-Ion, a toxic material.
WARNING
- Discard all toxic materials in a specified manner to prevent contamination of the environment. Before discarding a damaged or worn-out Li-ion battery, contact your local waste disposal agency, or the local Environmental Protection Agency for information and specific instructions. Take the batteries to a local recycling and/or disposal center, certified for lithium-ion disposal.
- If the battery pack cracks or breaks, with or without leaks, do not recharge it, and do not use it. Discard it and replace it with a new battery pack.
- DO NOT TRY TO REPAIR IT! To prevent injury and risk of fire, explosion, or electric shock, and to avoid damage to the environment:
- Cover the terminals of the battery with heavy-duty adhesive tape.
- DO NOT try to remove or destroy any of the battery pack components.
- DO NOT try to open the battery pack.
- If a leak develops, the released electrolytes are corrosive and toxic. DO NOT get the solution in the eyes or on the skin, and do not swallow it.
- DO NOT put these batteries in your regular household trash.
- DO NOT incinerate.
- DO NOT put them where they will become part of any waste landfill or municipal solid waste stream.
- Take them to a certified recycling or disposal center.
PROPOSITION 65
WARNING
- This product contains a chemical known to the state of California to cause cancer, birth defects, or other reproductive harm.
- Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects, or other reproductive harm.
Some examples of these chemicals are:
- Lead from lead-based paints;
- Crystalline silica from bricks cement and other masonry products;
- Arsenic and chromium from chemically treated lumber.
- Your risk of exposure to these chemicals varies depending on how often you do this type of work.
- To reduce your exposure to these chemicals, work in a well-ventilated area, and work with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
INSTALLATION
- Do not change or make accessories that are not recommended by the manufacturer.
- Do not put in the safety key or the battery pack until you assemble all the parts.
UNPACK THE MACHINE
- WARNING Make sure that you correctly assemble the machine before use.
- If parts of the machine are damaged, do not use the machine.
- If you do not have all the parts, do not operate the machine.
- If parts are damaged or missing, contact the service center.
- Open the package.
- Read the documentation provided in the box.
- Remove all the unassembled parts from the box.
- Remove the machine from the box.
- Discard the box and packing material in compliance with local regulations.
PLACE THE MOWER UPRIGHT IN VERTICAL POSITION
- Place the mower upright in a vertical position.
- Remove the packing material from the cable.
- Remove the rubber edge guard (G) from the upper handle.
- Insert the upper handle into the lower handle.
- Put the bolts (13) through the holes and tighten with the nuts (14), using a Philips head screwdriver (not included).
WARNING Do not damage the cable while installing the upper handle.
UNFOLD THE LOWER HANDLE
- Pull up on the handle holes (15) to release the lower handles.
- Fold the lower handle up until the handle pins (16) lock into position.
NOTE Make sure that the two handle pins are in the same position.
INSTALL THE GRASS CATCHER
- Remove the mulch plug.
- Remove the side discharge chute.
- Open the rear discharge flap (7) and hold it.
- Hold the grass catcher by its handle and engage the hooks (17) on the door rod (18).
- Close the rear discharge flap.
INSTALL THE MULCH PLUG
- Remove the grass catcher.
- Open the rear discharge flap (7) and hold it.
- Hold the mulch plug (11) by its handle and fit it in the discharge chute.
- Close the rear discharge flap.
INSTALL THE SIDE DISCHARGE CHUTE
CAUTION
- When you use the side discharge chute,
- Do not install the grass catcher.
- Keep the mulch plug installed.
- Open the side discharge flap and hold it.
- Line up the recesses of the side discharge chute (12) below the pivot (19).
- Close the side discharge flap.
SET THE CUTTING HEIGHT
The machine can be set to different cutting heights.
- Pull the height adjustment lever (8) rearward to increase the cutting height.
- Pull the height adjustment lever forward to decrease the cutting height.
INSTALL THE BATTERY PACK
WARNING
- If the battery pack or charger is damaged, replace the battery pack or the charger.
- Stop the machine and wait until the engine stops before you install or remove the battery pack.
- Read, know, and follow the instructions in the battery and charger manual.
NOTE
The machine has an automatic switch function that lets the other battery work when the first cannot operate.
- Open the battery door (20).
- Align the ribs on the battery pack with the grooves in the battery compartment.
- Push the battery pack into the battery compartment until the battery pack locks into place.
- When you hear a click, the battery pack is installed.
- Close the battery door.
NOTE The motor starts only when you put in the safety key (22).
REMOVE THE BATTERY PACK
- Open the battery door (20).
- Remove the safety key (22).
- Push and hold the battery release button (21).
- Remove the battery pack from the machine.
OPERATION
WARNING Wear eye protection during the operation.
START THE MACHINE
- Make sure the safety key is inserted into the slot.
- Push and hold the start button (1).
- While you hold the start button (1), grab the start handles (2) in the direction of the handlebar.
- Once the machine has started, you can release the start button (1).
- Press the Turbo button (29) to speed up to 3,200 RPM.
Battery capacity indicator (23)
Lights | Capacity |
---|---|
4 Green Lights | The battery is above 80% capacity |
3 Green Lights | The battery is between 80% and 60%- capacity |
2 Green Lights | The battery is at between 60% and 40%- capacity |
1 Green Light | The battery is between 40% and 20% ca- capacity |
Lights go out | The battery is less than 20% capacity and requires charging |
immediately
STOP THE MACHINE
- Release the start handle to stop the machine.
WARNING
- Wait until the blade fully stops before you start the machine again. Do not quickly turn the machine off and on.
WARNING
- Always remove the safety key and battery pack after you complete the work.
OPERATE THE SELF-PROPEL DRIVE SYSTEM
- Start the machine.
- While you hold the start handles (2), grab either of the drive levers (3) and pull towards the handlebar.
- Hold the start handles and the drive levers at the same time.
- Release either set of start handle (2) and drive lever (3) from the same side.
- Adjust the speed control (24) with your free hand.
- Slide the speed control button in the direction of the Rabbit Symbol to increase the speed.
- Pull the speed control button in the direction of the Turtle Symbol to decrease the speed.
- Release the drive levers to close the self-propel system.
To engage the self-propel drive system while the mower is not running:
- Press and hold the start button (1), then pull up on the drive lever (3) OR
- Pull up on the drive lever (3), then press the start button (1).
LED HEADLIGHTS
- When the mower is ready to start, you may grab the start handle (2) or the self-propel lever (3) to turn on the LED headlight (10).
- Release the start handles and self-propel levers to turn off the headlight.
EMPTY THE GRASS CATCHER
- Stop the machine.
- Remove the safety key.
- Remove the battery pack.
- Open the rear discharge door and hold it.
- Hold the grass catcher by its handle and unhook it from the door rod.
- Close the rear discharge door.
- Empty the grass catcher.
OPERATE ON SLOPES
WARNING
- Do not mow on the slopes with an incline of more than 15°. If you are not comfortable, do not mow on a slope.
WARNING
- Please keep a low self-propelled speed when you mow on a slope.
- Do not go up and down on a slope, mow across the face of the slope. Be careful when you change the direction on a slope.
- Monitor the holes, ruts, rocks, and other hidden objects that can cause you to fall. Remove all obstacles such as rocks and tree limbs.
- Make sure that your footing is stable. If you are out of balance, release the start handle immediately.
- Do not mow near drop-offs, ditches, or embankments.
OPERATION TIPS
- Do not try to override the operation of the start button or start handles.
- Do not tilt the machine when you start it.
- Do not put hands or feet near or below the turning parts.
- Keep the discharge chute clean.
- Do not cut wet grass.
- Higher blade height is necessary for new or thick grass.
- Clean the bottom of the mower deck after each use.
- Remove grass clippings, leaves, dirt, and other debris.
MAINTENANCE
WARNING
- Remove the safety key and battery pack from the machine before maintenance.
WARNING
- Keep the motor and battery pack free from grass, leaves, or too much grease.
CAUTION
- Use only approved replacement parts.
CAUTION
- Do not let brake fluids, gasoline, or petroleum-based materials touch the plastic parts.
- Chemicals can cause damage to the plastic, and make the plastic unserviceable.
CAUTION
- Do not use strong solvents or detergents on the plastic housing or components.
GENERAL MAINTENANCE
- Before each use, examine the machine for damaged, missing, or loose parts such as screws, nuts, bolts, and caps.
- Tighten correctly all the fasteners and caps.
- Clean the machine with a dry cloth. Do not use water.
REPLACE THE BLADE
WARNING
- Use only approved replacement blades.
WARNING
- Wear heavy gloves or wind cloth around the blade when you touch the blade.
NOTE
- Stop the machine.
- Make sure that the blade is fully stopped.
- Remove the safety key and battery pack.
- Turn the machine to its side.
- Use a piece of wood to prevent the movement of the blade.
- Remove the mounting screw (25) and spacer (28) with a wrench or socket.
- Remove the blade (26) and fan (27).
- Install the new blade. Make sure that the arrows on the fan engage the holes in the blade.
- Put in the spacer and tighten the mounting screw.
- Recommended tightening torque: 24-27 ft. lbs. 33-37 N.m.
STORE THE MACHINE
- Remove the safety key.
- Remove the battery pack(s).
- Clean the machine before storage.
- Make sure the motor is not hot when you store the machine.
- Make sure that the machine does not have loose or damaged parts.
If it is necessary, follow these instructions:
- Replace the damaged parts.
- Tighten the bolts.
- Speak to a person at an approved service center.
- Store the machine in a dry area.
- Make sure that children cannot come near the machine.
VERTICAL STORAGE
- Remove the grass catcher.
- Remove the battery and safety key.
- Pull through the handle holes to fold away the handles.
- Lock the handles into position.
- Stand the machine on end and make sure that the brackets touch the floor.
TROUBLESHOOTING
If you cannot find the solution to these problems, go to the service center.
TECHNICAL DATA
Voltage | 80 V |
---|---|
Motor | Brushless |
No load speed | 2800 RPM / 3200 RPM (Turbo) |
Self-propelled speed | 1.9-4.9 fps (0.6-1.5 m/s) |
Deck size | 21″ |
Height adjustments | 1-3/8 – 4” (3.5 – 10.2 cm) |
Front-wheel | 8″ |
Rear wheel | 10″ |
Functions | 4-in-1 (Mulch, Rear Bag, Side Discharge, Turbo) |
Weight (without battery pack) | 65 lbs (29.5 kg) |
Battery model | 2901302/BAB703/ GBA80250/2902402/ BAB706/2902502 and other BAB |
series
Charger model| CAB801/2901402 /GCH8020 and other CAB series
LIMITED WARRANTY
- Greenworks hereby warranties this product, to the original purchaser with proof of purchase, for a period of four (4) years against defects in materials, parts, or workmanship.
- Greenworks, at its discretion, will repair or replace any parts found to be defective, through normal use, free of charge to the customer.
- This warranty is valid only for units that have been used for personal use that have not been hired or rented for industrial/commercial use, and that have been maintained under the instructions in the owner’s manual supplied with the product from new.
ITEMS NOT COVERED BY WARRANTY:
- Any part that has become inoperative due to misuse, commercial use, abuse, neglect, accident, improper maintenance, or alteration; or
- The unit, if it has not been operated and/or maintained by the owner’s manual; or
- Normal wear;
- Routine maintenance items such as lubricants, blade sharpening;
- Normal deterioration of the exterior finish due to use or exposure.
HELPLINE:
- Warranty service is available by calling our toll-free helpline, at 1-855-345-3934.
TRANSPORTATION CHARGES:
- Transportation charges for the movement of any power equipment unit or attachment are the responsibility of the purchaser.
- It is the purchaser’s responsibility to pay transportation charges for any part submitted for replacement under this warranty unless such return is requested in writing by Greenworks.
USA address: Canadian address:
- Greenworks Tools Greenworks Tools Canada Inc. P.O. Box 1238 P.O. Box 93095, Newmarket, Ontario
- Mooresville, NC 28115 L3Y 8K3
EXPLODED VIEW
No. | Part No. | Qty. | Description |
---|---|---|---|
1 | R0202444-00 | 1 | Blade assembly kit |
2 | RB341251179A | 1 | Rear discharge door |
3 | R0200227-00 | 1 | Side discharge cover kit |
4 | RB341241179C | 1 | Side discharge chute |
5 | RB341281179A | 2 | 8″ front wheel assembly |
6 | R0200744-00 | 2 | 10″ rear wheel assembly |
7 | R0201552-00 | 1 | Safety key |
8 | R0202452-00 | 1 | Upper control assembly |
No. | Part No. | Qty. | Description |
--- | --- | --- | --- |
9 | R0201921-00 | 1 | Grass catcher assembly |
10 | R0202453-00 | 1 | Power control board |
11 | R0200068-00 | 1 | Mulch plug kit |
12 | R0202449-00 | 1 | Motor |
13 | R0202450-00 | 2 | Bolt/nut |
Documents / Resources
|
greenworks pro MO80L06 Lawn
Mower
[pdf] User Manual
pro MO80L06 Lawn Mower, pro MO80L06, Lawn Mower, Mower
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>