INK IVY II153-0146 Grace Ivy Table Lamp Instruction Manual

INK IVY II153-0146 Grace Ivy Table Lamp

Product Information: The Grace Ivy Table Lamp (Item# II153-0146) is a stylish and modern table lamp that adds a touch of elegance to any room. It comes with a clear cord for easy installation and a 9W LED bulb that provides bright and energy-efficient lighting.

The lamp is made up of several components, including:

• Body with Clear Cord (Qty: 1)
• Socket Neck (Qty: 1)
• 9W LED bulb (Qty: 1)
• Harp (Qty: 1)
• Shade (Qty: 1)
• Finial (Qty: 1)

Product Usage Instructions: Follow these steps to assemble and use the Grace Ivy Table Lamp:

1. Unpack the lamp and place all parts on a surface or floor.
2. Gently screw the socket neck (B) into the body (A).
3. Screw the light bulb (C) into the socket neck (B).
4. Insert the harp ends (D) into the socket neck (B).
5. Place the shade (E) over the harp (D).
6. Secure the shade (E) by turning the finial (F) onto the harp top clockwise until tight.

Once these steps are completed, your Grace Ivy Table Lamp is ready to use. Enjoy the beautiful illumination it provides!

Important Safety Instructions

• For safety purpose, this lamp is equipped with a polarized plug (one blade is wider than the other). If the plug does not fit securely into your outlet, do not force it, contact a professional electrician. Never alter the plug.
• These instructions are provided for your safety. It is very important that they are read carefully and completely before assembling fixture.
• This fixture has been rated for up to (1) 60-watt maximum TYPE A bulb or (1) 9W LED light bulb (Included). To avoid the risk of fire, do not exceed the recommended wattage.
• This lighting fixture is intended for indoor, residential use.

Warning

• Wires and cables are all attached (further wiring is not needed from consumer). When unpacking product, be careful to not pull wires as it may result in a bad connection.
• To reduce the risk of fire, electrical shock or personal injury, do not turn on lighting fixture until light bulb is installed and assembly is complete.
• Always turn off the light fixture and allow it to cool before replacing the light bulb.

Care Instructions

• Wipe with soft dry cloth only.
• Always avoid the use of harsh chemicals or abrasives as they may damage it.

Pre-assembly

• Remove all parts and hardware from box along with any plastic protective packaging.
• Check that all parts listed are included.
• Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or hardware.

Component List

Assembly Instruction

• Step 1. Unpack and place all parts on a surface or floor.

• Step 2. Gently screw the socket neck (B) into the body (A).

• Step 3. Screw the light bulb (C) into the socket neck (B). Insert the harp ends (D) into the socket neck (B).

• Step 4. Place the shade (E) over the harp (D).

• Step 5. Secure the shade (E) by turning the finial (F) onto the harp top clockwise until tight.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>