INK IVY II153-0125 Piper Table Lamp Instruction Manual
- October 30, 2023
- INK IVY
Table of Contents
INK IVY II153-0125 Piper Table Lamp
Product Information
The Piper Table Lamp (item # II153-0125) is a stylish and functional lamp that is equipped with a polarized plug for safety. It can support up to two 60-watt maximum TYPE A bulbs or two 13-watt compact fluorescent light bulbs. The lamp comes with all the necessary parts, including a final, lamp shade, small and large tubes, socket assembly, and base. The wires and cables are already attached, and the lamp should not be plugged into an electrical outlet until it is fully assembled.
Product Usage Instructions
Before assembling the fixture, read the important safety instructions carefully. Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or hardware.
To assemble the lamp, follow these steps:
- Unpack and place all parts on a surface or floor.
- Attach the Large Tube (E) to the Base (F).
- Attach the Socket Assembly (D) to the Large Tube (E). Do not overstrain the cord.
- Attach the Small Tube (C) to the Socket Assembly (D).
- Attach the Lamp Shade (B) to the Small Tube (C) with the Finial (A).
- The assembly is now complete.
When replacing the bulb, turn off the power and unplug the lamp from the wall
outlet. Make sure the bulb has sufficient time to cool down before replacing
it. To avoid the risk of fire, do not exceed the recommended wattage. If the
plug does not fit securely into your outlet, do not force it, contact a
professional electrician. Never alter the plug in any way.
Thank you for your purchase of the Piper Table Lamp. Enjoy your new lamp!
Important Safety Instructions
- For safety purpose, this lamp is equipped with a polarized plug (one blade is wider than the other). If the plug does not fit securely into your outlet, do not force it, contact a professional electrician. Never alter the plug in any way.
- These instructions are provided for your safety. It is very important that they are read carefully and completely before assembling fixture.
- This fixture has been rated for up to (2) 60-watt maximum TYPE A bulb or (2) 13-watt compact fluorescent light bulb. To avoid the risk of fire, do not exceed the recommended wattage
Pre-assembly
- Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or hardware.
- Remove all parts and hardware from box along with any plastic protective packaging.
Parts Enclosed
| Item | Description | QTY |
|---|---|---|
| A | Finial | 1 |
| B | Lamp Shade | 1 |
| C | Small Tube | 1 |
| D | Socket Assembly | 1 |
| E | Large Tube | 1 |
| F | Base | 1 |
Warning:
- Wires and cables are all attached (further wiring is not needed from the consumer). When unpacking the product, be careful to not pull wires as it may result as a bad connection. Do not plug into electrical outlet until lamp is fully assembled.
Note:
- Turn the power off (unplug from the wall outlet) before replacing the bulb. Make sure the bulb has sufficient time to cool down.
Assembly Instruction:
- Step1. Unpack and place all parts on a surface or floor.
- Step2. Attach Large Tube (E) to Base (F)
- Step3. Attach Socket Assembly (D) to Large Tube (E). Do not overstrain the cord.
- Step4. Attach Small Tube (C) to Socket Assembly (D)
- Step5. Attach Lamp Shade (B) to Small Tube (C) with Finial (A)
- Step6. Assembly is completed.
Care instructions
- Wipe with soft dry cloth only
- Always avoid the use of harsh chemicals or abrasive as they may damage to the finish.
- Thank you for your purchase
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>