PENTAIR CCP240 Clean and Clear Plus Filters Owner’s Manual
- October 30, 2023
- Pentair
Table of Contents
PENTAIR CCP240 Clean and Clear Plus Filters
Featured Highlights
- Certified to NSF/ANSI Standard 50
- Large filter area for increased dirt capacity
- 1-1/2 in., 100% drain clean-out port
- Continuous High Flow™ Internal Air Relief *
- Base and plumbing kits available
- Injection molded tank
- Balanced hydraulic flow
- Tension Control™ Clamp
- 100% factory tested
- Black bulkhead unions
- High Flow manual air relief valve
Clean & Clear Plus Filters have a corrosion resistant injection molded filter tank featuring strength and reliability. The cartridge assembly uses four easy to clean, non-woven, polyester cartridges. Each filter is supplied with a bulkhead union set for easy installation.
Ordering Information
- Certified to NSF/ANSI Standard 50.
- Residential rate .375 GPM per sq. ft. of filter area.
Dimensions and Performance
Note: Actual system flow will depend on plumbing size and other system
components.
Note: Pentair does not recommend flow rates above 150 GPM.
- Integrated continuous High Flow internal air relief is operational only when there is unobstructed flow in the circulating system.
Note: Operating Limits – maximum continual operating pressure of 50 PSI. Pool/spa (bather) applications, maximum operating water temperature (internal filter) 104°F (40°C).
References
Read User Manual Online (PDF format)
Loading......