HAMPTON BAY KADPK337-JM Kitchen Island End Panel Installation Guide
- June 12, 2024
- HAMPTON BAY
Table of Contents
HAMPTON BAY KADPK337-JM Kitchen Island End Panel Installation Guide
ASSEMBLY & INSTALLATION INSTRUCTIONS
-
CUTTING PANEL TO SIZE
If a reduced depth is required, the panel can be cut to size. Measure and cut ¾” shorter than the desired depth to account for the thickness of the post. -
ATTACH LEG
Set the leg into place and temporarily clamp it to the panel. Fasten at the top and bottom with the provided screws. Use finish nails to secure it on the back side. -
INSTALLING TO A CABINET
Clamp the decorative island panel to the cabinet placing ¼” shims in between as shown. A small piece of toe kick (KATK) works well as a shim. Pre-drill through the cabinet and shims into the panel. Secure using #8 x 1½” screws. -
INSTALLING AS A PENINSULA END
-
A cleat is required that will fit under the panel. Fasten the cleat to the floor in the desired location using a fastening method appropriate for your floor type.
-
Lower the panel over the cleat and fasten in place using appropriate fasteners and adhesive.
We have partnered with BILT™ to provide 3D interactive instructions for this product. Download the free BILT™ app to a mobile device and search “Woodmark”
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>