Goldair GCT270 2000W Digital Ceramic Tower Heater Instruction Manual
- June 4, 2024
- GOLDAIR
Table of Contents
Goldair GCT270 2000W Digital Ceramic Tower Heater
General Care and Safety Guide
YOUR SAFETY IS IMPORTANT TO US. PLEASE ENSURE YOU TAKE NOTE OF THE INSTRUCTIONS AND WARNINGS OUTLINED IN THIS MANUAL.
CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.
-
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or lack of experience and knowledge unless they are supervised or have been given instruction concerning the use of the appliance by a person responsible for their safety.
-
Children should be supervised to ensure that they do not play with the appliance.
-
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
WARNING: You must not cover this appliance. Covering this appliance presents fire risk and will activate the safety fuse; permanently disabling the unit.
WARNING : Do not use this appliance in small rooms when they are occupied by persons not capable of leaving the room on their own, unless constant supervision is provided.
WARNING: To reduce the risk of fire, keep textiles, curtains, or any flammable material a minimum distance of 1 metre from the air outlet. -
Use only the voltage specified on the rating label of the appliance.
-
Keep all objects at least 1 metre from the front, sides and rear of the appliance.
-
This appliance is intended for household use only and not for commercial or industrial use.
-
Indoor use only.
-
Use this appliance only as described in this manual. Any other use is not recommended by the manufacturer and may cause fire, electric shock or injury.
-
Do not use the appliance if it has been dropped or damaged.
-
The common cause of overheating is deposits of dust or fluff in the appliance. Ensure these deposits are removed regularly by unplugging the appliance and vacuum cleaning the air vents and grills.-+
-
Never use the appliance to dry clothes.
-
Always unplug appliance when not in use.
-
When the appliance has been unpacked, check it for transport damage and ensure all parts have been delivered. If parts are missing or the appliance has been damaged, contact the Customer Services Team.
-
Do not use if there are visible signs of damage to the appliance.
-
Do not connect the appliance to the mains supply until completely assembled and adjusted.
-
Ensure hands are dry before handling the plug or main unit.
-
Ensure the appliance is on a flat, stable, heat-resistant surface.
-
Do not operate with cord set coiled up as a heat build-up is likely, which could be sufficient to become a hazard.
-
Carry out regular checks of the supply cord to ensure no damage is evident
-
Do not operate this appliance with a damaged cord, plug or after the appliance malfunctions or has been dropped or damaged in any manner. Take to a qualified electrical person for examination, electrical service or repair.
-
Do not twist, kink or wrap the cord around the appliance, as this may cause the insulation to weaken and split. Always ensure that all cord has been removed from any cord storage area and is unrolled before use.
-
It is recommended that this appliance is plugged directly into the wall socket. Power boards are not rated to supply power to high-wattage appliances.
-
A correctly specified, an undamaged extension cord may be used with this appliance provided it is used in a safe manner.
-
Do not remove plug from the power socket until the appliance has been switched off.
-
Do not remove the plug from the power socket by pulling the cord; always grip plug.
-
Do not place the cord under the carpet or cover with rugs or furniture. Arrange the cord so it cannot be tripped over.
-
Don’t place appliances on bedding or on thick & long carpet where the openings may get blocked.
-
Switch off and use the handle provided when moving
-
Do not place the appliance close to a radiant heat source.
-
Do not insert or allow foreign objects to enter any ventilation or exhaust opening, as this may cause an electric shock, fire or damage to the appliance.
-
Do not sit on the appliance.
-
Do not use abrasive cleaning products on this appliance. Clean with a damp cloth (not wet) and rinsed in hot soapy water only. Always remove plug from the mains supply before cleaning.
-
Do not operate in areas where petrol, paint or other flammable liquids are used or stored.
-
Do not use this appliance in the immediate surroundings of a bath, a shower, or a swimming pool or other liquids.
-
The appliance must not be immersed in any liquids.
-
There are no user-serviceable parts installed in the unit.
-
Do not place the unit in wardrobes or other enclosed spaces as this may cause fire hazards.
-
This unit is not supposed to be used in or around locations where foodstuffs, works of art or delicate articles of science, etc. are stored.
-
If your appliance does not work, or is not working properly, contact the place of purchase or the Customer Services Team.
-
The remote control supplied with this appliance uses 2 x AAA battery.
Operating Your Heater
Always choose a safe location for the heater, keeping in mind the safety
precautions outlined. Ensure all packaging has been removed from the unit
before use. Please follow the below instructions.
WARNING: In order to avoid overheating or fire, do not cover the heater.
WARNING: Keep all objects at least 1 metre from the front, sides and rear
of the appliance.
WARNING: Do not use this heater with a programmer, separate timer,
remote-control system or any other device that switches the heater on
automatically, since a fire risk exists if the heater is covered or positioned
incorrectly.
WARNING: Never leave this heater unattended when in use.
Ensure the heater is on a flat, stable, heat-resistant surface.
Once the heater is in a safe operating position and all switches are in the
off position, insert the power plug into the mains outlet and switch on.
CAUTION: Ensure the power cord is not tight because if pulled it may
partially pull the plug from the socket. A partially inserted plug will
overheat the plug and socket and could result in fire.
Ensure heater is on a flat, stable, heat-resistant surface. Once the heater is
in a safe operating position and all switches are in the off position, insert
the power plug into the mains outlet. Flick the Power Switch and the power
indicator lights will turn on. The heater is now in ‘STANDBY’ mode.
Note: The touchscreen and remote control operate in the same way.
- Power: Turns the heater ‘ON’ and ‘OFF’. In ‘ON’ mode, the screen will display the current room temperature and begin to heat in ‘LOW SPEED’ mode. After turning unit OFF, the fan will continue to run for about 30 seconds to reduce the residual heat inside the unit. After 30 seconds, the heater device will stop running. Do not remove the plug directly while the power is still running to avoid damaging the device.
- Heat Setting: Changes the heating speed between ‘LOW SPEED’, ‘HIGH SPEED’, and ‘FAN’.
- Temperature Setting: Change the target room temperature using the ‘+’ and ‘-‘ buttons. Each time you press, the set temperature will increase or decrease by 1°c. Choose between a maximum of 30°c and a minimum of 10°c. Once you have selected your desired temperature, it will flash for 5 seconds and the screen will return to display the current room temperature.
- Reserve/Timer: Set this heater to turn either ON or OFF. To turn ON, heater must be in ‘STANDBY’ mode. To turn OFF, heater must be in ‘ON’ mode. Press the ‘RESERVE/TIMER’ button. The indicator light will turn on, the screen will display and flash ‘1H’, indicating in 1 hour the heater will turn ON/OFF respectively. Press the ‘RESERVE/TIMER’ button again to increase the timer by 1 hour until a maximum of 9 hours. To cancel the timer, press the ‘RESERVE/TIMER’ button until ‘0H’ displays. Once you have selected your desired temperature, it will flash for 5 seconds and then return to displaying the room temperature.
- Oscillation/ Swing : Turn the oscillation/ swing setting ON or OFF.
SAFETY DEVICES
This appliance has three protection devices
- Tilt Switch – this w gular cleaning to ensure trouble-free operation:
- Unplug the heater from the mains supply before cleaning.
- Ensure that the heater has been allowed to cool down completely before cleaning.
- The common cause of overheating is deposits of dust or fluff in the appliance. Ensure these deposits are removed regularly by unplugging the appliance and vacuum cleaning the air vents and grills.
- Use a damp cloth (not wet) to wipe the exterior of the heater to remove dust and dirt.
- Never use solutions such as petrol, thinners or polishing agents.
- Ensure the heater is dry before plugging back into the mains supply.
- Do not attempt to dismantle the heater.
- There are no user-serviceable parts. For service or repair, contact an authorized electrical service technician.
PROOF OF PURCHASE
To receive warranty retain receipt as proof of purchase.
Two Year Warranty
Thank you for purchasing this Goldair product. Your product is warranted
against faults and manufactured when used in normal domestic use for a period
of two years. In non-domestic use Goldair limits the voluntary warranty to
three months.
Goldair undertakes to repair or replace this product at no charge if found to
be defective due to a manufacturing fault during the warranty period.
This warranty excludes damage caused by misuse, neglect, shipping accident,
incorrect installation, or work carried out by anyone other than a qualified
electrical service technician.
PLEASE KEEP YOUR RECEIPT AS THIS WILL HELP VERIFY YOUR WARRANTY.
The benefits given to you by this warranty are in addition to other rights and
remedies available to you under law in relation to the goods or services to
which this warranty relates.
In Australia, our goods come with guarantees that cannot be excluded under the
Australian Consumer Law. You are entitled to a replacement or refund for a
major failure and compensation for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a
major failure.
In New Zealand this warranty is additional to the conditions and guarantees of
the Consumers Guarantee Act (1993).
Goldair Two Year Warranty (IMPORTANT: Please complete and retain this warranty card) Name
- Address
- Place Of Purchase
- Name Of Product
- Date Of Purchase
- Model Number
Attach a copy of the purchase receipt to this warranty card
Due to continual design improvements, the product illustrated in this User
Manual may differ slightly from the actual product.
Goldair – New Zealand CDB Goldair
PO Box 100-707
N.S.M.C
Auckland
Phone +64 (0)9 917 4000 Phone 0800 232 633
www.goldair.co.nz
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>