etac 78190E Clean Safety Cross Bar Instruction Manual
- June 12, 2024
- Etac
Table of Contents
etac 78190E Clean Safety Cross Bar78190E Clean Safety Cross Bar
Product Information
The product is manufactured by Etac AB and is designed to provide assistance with cleaning tasks. It is equipped with assembly instructions and can be used for various cleaning purposes.
Product Usage Instructions
-
Before using the product, ensure that all parts are clean and free from any dirt or debris.
-
Refer to the provided assembly instructions for the proper setup and configuration of the product.
-
Follow the recommended cleaning technique for the specific task at hand.
-
For general cleaning, wet a cloth or sponge with water or a suitable cleaning solution and apply it to the surface to be cleaned.
-
Gently scrub the surface using the product, applying moderate pressure as needed.
-
Rinse the cloth or sponge regularly and continue cleaning until the desired result is achieved.
-
For stubborn stains, apply a stronger cleaning solution or use
the appropriate cleaning tool recommended for the surface. -
After cleaning, rinse the product thoroughly and remove any excess water or cleaning solution.
-
Store the product in a dry and clean place when not in use.
For detailed information on specific cleaning tasks or troubleshooting, refer to the full user manual provided with the product.
INSTALLATION INSTRUCTION
Featured
- 78190E
- 04-04-14
- Etac AB, Box 203, SE-334 24 Anderstorp
- Tel. +46/371-58 73 00, Fax. +46/371-58 73 90
- www.etac.se
Documents / Resources
| etac
78190E Clean Safety Cross
Bar
[pdf] Instruction Manual
78190E Clean Safety Cross Bar, 78190E, Clean Safety Cross Bar, Safety Cross
Bar, Cross Bar, Bar
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>