Goldair GSD170 8L Dehumidifier Instruction Manual
- October 26, 2023
- GOLDAIR
Table of Contents
**
**
Goldair GSD170 8L Dehumidifier
DIY Cardboard Conveyor Belt
General
Care and Safety Guide
YOUR SAFETY IS IMPORTANT TO US. PLEASE ENSURE YOU TAKE NOTE OF THE
INSTRUCTIONS AND WARNINGS OUTLINED IN THIS MANUAL.
CAUTION:
In order to avoid a hazard due to inadvertent resetting of the thermal cut-
out, this appliance must not be supplied through an external switching device,
such as a timer, or connected to a circuit that is regularly switched on and
off by the utility.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or lack of experience and knowledge, unless they are supervised or have been given instruction concerning the use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
WARNING:
You must not cover this appliance. Covering this appliance presents fire risk
and will activate the safety fuse; permanently disabling the unit.
- Do not use this appliance in small rooms when they are occupied by persons not capable of leaving the room on their own, unless constant supervision is provided.
- To reduce the risk of fire, keep textiles, curtains, or any flammable material a minimum distance of 1 metre from the air outlet.
- Use only the voltage specified on the rating label of the appliance
- Keep all objects at least 1 metre from the front, sides and rear of the appliance.
- This appliance is intended for household use only and not for commercial or industrial use.
- Indoor use only
- Use this appliance only as described in this manual. Any other use is not recommended by the manufacturer and may cause fire, electric shock or injury
- Do not use the appliance if it has been dropped or damaged
- The common cause of overheating is deposits of dust or fluff in the appliance. Ensure these deposits are removed regularly by unplugging the appliance and vacuum cleaning the air vents and grills
- Never use the appliance to dry clothes
- Always unplug appliance when not in use.
- When the appliance has been unpacked, check it for transport damage and ensure all parts have been delivered. If parts are missing or the appliance has been damaged, contact the Customer Services Team
- Do not use if there are visible signs of damage to the appliance
- Do not connect the appliance to mains supply until completely assembled and adjusted
- Ensure hands are dry before handling the plug or main unit
- Ensure appliance is on a flat, stable, heat-resistant surface
- Do not operate with cord set coiled up as a heat build up is likely, which could be sufficient to become a hazard
- Carry out regular checks of the supply cord to ensure no damage is evident
- Do not operate this appliance with a damaged cord, plug or after the appliance malfunctions or has been dropped or damaged in any manner. Take to a qualified electrical person for examination, electrical service or repair.
- Do not twist, kink or wrap the cord around the appliance, as this may cause the insulation to weaken and split. Always ensure that all cord has been removed from any cord storage area and is unrolled before use
- It is recommended that this appliance is plugged directly into the wall socket. Power boards are not rated to supply power to high wattage appliances.
- A correctly specified, undamaged extension cord may be used with this appliance provided it is used in a safe manner
- Do not remove plug from power socket until the appliance has been switched off
- Do not remove plug from power socket by pulling cord; always grip plug.
- Do not place cord under carpet or cover with rugs or furniture. Arrange the cord so it cannot be tripped ove
- Don’t place appliance on bedding or on thick & long carpet where the openings may get blocked.
- Switch off and use handle provided when moving
- Do not place appliance close to radiant heat source.
- Do not insert or allow foreign objects to enter any ventilation or exhaust opening, as this may cause an electric shock, fire or damage to the appliance.
- Do not sit on the appliance.
- Do not use abrasive cleaning products on this appliance. Clean with a damp cloth (not wet) rinsed in hot soapy water only. Always remove plug from the mains supply before cleaning.
- Do not operate in areas where petrol, paint or other flammable liquids are used or stored.
- Do not use this appliance in the immediate surrounds of a bath, a shower, or a swimming pool or other liquids.
- The appliance must not be immersed in any liquids
- There are no user serviceable parts installed in the unit
- Do not place the unit in wardrobes or other enclosed spaces as this may cause fire hazards.
- This unit is not supposed to be used in or around locations where foodstuffs, works of art or delicate articles of science, etc. are stored.
- If your appliance does not work, or is not working properly, contact the place of purchase or the Customer Services Team.
Operating Your Dehumidifier
Always choose a safe location for the dehumidifier, keeping in mind the safety precautions outlined. Ensure all packaging has been removed from the unit before use. Please follow the below instructions.
WARNING:
In order to avoid overheating or fire, do not cover the dehumidifier.
- Keep all objects at least 200mm from all sides of the appliance.
- Do not use this dehumidifier with a programmer, separate timer, remote-control system or any other device that switches the dehumidifier on automatically, since a fire risk exists if the dehumidifier is covered or positioned incorrectly.
- Never leave this dehumidifier unattended.
Ensure dehumidifier is on a flat, stable, heat-resistant surface. Once the dehumidifier is in a safe operating position and all switches are in the off position, insert the power plug into the mains outlet and switch on.
CAUTION:
Ensure the power cord is not tight because if pulled it may partially pull the
plug from the socket. A partially inserted plug will overheat the plug and
socket and could result in fire.
Leave the appliance to stand for one hour after transport or after the unit
has been on its side before connecting it to the mains supply to let the
refrigerant settle. Ensure all external windows and doors are closed before
turning on the unit. Ensure that the water container is positioned correctly.
Leave the appliance to stand for one hour after transport or after the unit
has been on its side before connecting it to the mains supply to let the
refrigerant settle. Ensure that the water container is positioned correctly.
Ensure all external windows and doors are closed before turning on the unit.
Plug into power supply and switch on at the mains. The appliance will display
the current humidity level on the control panel. The POWER indicator light
will illuminate to show power to the unit. To turn the appliance on, press the
POWER button. Use the FAN SPEED button to switch between High and Low fan
speeds. As long as the water container is not full, the appliance will
continue to operate until it is switched off manually. If the appliance is
switched off manually and then switched back on, the compressor will start to
operate after three minutes. To turn the appliance off, press the POWER
button.
The louvre can be adjusted manually by lifting the louvre at the opening and
pushing it upward or pressing it back down to close it. Press the HUMIDITY SET
Button to set the desired humidity level in the room, each press of the
HUMIDITY SET button will adjust in 5% increments from 40-80%. Once you have
set the desired humidity level, the LED will display the room humidity level
again and will adjust as the room humidity level increases or decreases. When
the relative humidity in the room is lower than the selected humidity, the
unit will automatically stop dehumidifying until the humidity level increases
again. This appliance is designed to provide optimum performance at 35°C to
15°C but it is still effective down to 5°C. Ultimately the performance of this
appliance is dependant on the amount of moisture or water vapour in the air.
Please note:
This appliance is rated to extract 8L per day in an environment of 80%
humidity and temperature of 30°C. This is the world-wide standard for rating
dehumidifiers. In NZ we do not have climatic conditions with this humidity and
high temperature. Accordingly this product will not extract 8L per day,
extraction levels will be lower.
- Control Panel
Operating your Appliance
TIMER
When the unit is operating press the TIMER button to set the length of time
that you would like the unit to run for before turning off. Each press of the
TIMER button will adjust the length of time by 1 hour increments from 1 –
24hours. To turn off the Timer function, set the Timer back to “00” hours or
simply turn the unit off. When the unit is Off press the TIMER button to set
the length of time that you would like the unit to remain off before turning
on. Each press of the TIMER button will adjust the length of time by 1 hour
increments from 1 – 24hours. To turn off the Timer function, set the Timer
back to “00” hours or simply turn the unit on manually.
WATER TANK FULL
-
Remove the water tank
-
Remove the break away plastic cover from in front of the water outlet port
-
Connect the plastic tube onto the water outlet port
-
Replace the water tank
A beep signal will sound 15 times. The WATER FULL indicator light will
illuminate on the control panel. The compressor will stop automatically, and
the unit will stop dehumidifying. Empty the water container and replace it in
the correct position. The appliance will continue dehumidifying when the
compressor automatically restarts after approximately three minutes.
PERMANENT WATER DRAINAGE
It is possible to connect a drainage tube (not supplied) to the unit for
permanent water drainage. If this option is desired, you will need to purchase
a suitable tube from your local hardware retailer. (Goldair Select does not
hold tubes as spare parts). Ensure that the end of the tube is lower than the
drain opening, otherwise the water will not drain and flooding may occur. Also
ensure the water tank is in position (in the unit) otherwise the continuous
drainage will not operate. Place the end of the drainage tube in a drainage
outlet. When you no longer wish to use the permanent water drainage,
disconnect the drainage tube from the device.
WARNING!
Take care in positioning your appliance, using the timer will mean the unit
will come on automatically. Fire may result if placed next to combustible
material.
Care and Cleaning
CARE AND CLEANING
The dehumidifier requires regular cleaning to ensure trouble free operation:
- Unplug the dehumidifier from the mains supply before cleaning.
- Ensure that the dehumidifier has been allowed to cool down completely before cleaning.
- The common cause of overheating is deposits of dust or fluff in the appliance. Ensure these deposits are removed regularly by unplugging the appliance and vacuum cleaning the air vents and grills.
- Use a damp cloth (not wet) to wipe the exterior of the dehumidifier to remove dust and dirt.
- Never use solutions such as petrol, thinners or polishing agents.
- Ensure the dehumidifier is dry before plugging back into the mains supply.
TO CLEAN THE AIR FILTER:
Unplug the appliance from the mains supply. Remove the filter. Clean the
filter with a vacuum cleaner to remove dust or if it is exceptionally dirty,
wash it with warm water and a mild detergent. Ensure the filter is completely
dry before placing back in the unit.
WARNING:
Never use unit without the air filter.
Do not attempt to dismantle the appliance. There are no user serviceable
parts. For service or repair, contact an authorised electrical service
technician.
STORAGE
To store the unit, remove the plug from the socket and empty the water tank.
Allow the container and the appliance to dry completely. Clean the air filter.
Store the device in a dust-free location, preferably covered with a sheet of
plastic.
Trouble Shooting your Dehumidifier
| Problem | Cause | Solution |
|---|---|---|
| The Dehumidifier will not turn on | The power is not connected | Insert plug |
into mains power supply and turn unit on
The Dehumidifier is not extracting water| The water tank is full| Remove the
water tank and empty water
The water tank is not in its correct position| Remove water tank and replace
it correct position
The air filter is clogged| Clean the air filter as per instructions in user
manual
The temperature or relative humidity in the room is too low| It is normal for
the Dehumidifier not to operate in low humidity or low temperatures
The Dehumidifier operates, but reduces the relative humidity in the room by
small amounts| The room which the Dehumidifier is operating in is too large|
Recommend using a Dehumidifier with a larger capacity
There are too many sources of humidity| Recommend using a Dehumidifier with a
larger capacity
The room has too much ventilation| Reduce the number of ventilation sources
(i.e. close windows, doors, etc.
Two Year Warranty
Thank you for purchasing this Goldair product. Your product is warranted
against faults and manufacture when used in normal domestic use for a period
of two years. In non-domestic use Goldair limits the voluntary warranty to
three months. Goldair undertake to repair or replace this product at no
charge if found to be defective due to a manufacturing fault during the
warranty period. This warranty excludes damage caused by misuse, neglect,
shipping accident, incorrect installation, or work carried out by anyone other
than a qualified electrical service technician.
PLEASE KEEP YOUR RECEIPT AS THIS WILL HELP VERIFY YOUR WARRANTY.
The benefits given to you by this warranty are in addition to other rights and
remedies available to you under law in relation to the goods or services to
which this warranty relates. In Australia, our goods come with guarantees that
cannot be excluded under the Australian Consumer Law. You are entitled to a
replacement or refund for a major failure and compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure. In New Zealand this warranty is
additional to the conditions and guarantees of the Consumers Guarantee Act
(1993).
Goldair – New Zealand
CDB Goldair
PO Box 100-707
N.S.M.C
Auckland
Phone +64 (0)9 917 4000
Phone 0800 232 633
www.goldair.co.nz
Goldair – Australia
CDB Goldair Australia Pty
PO Box 574
South Morang
Victoria, 3752
Phone +61 (0)3 9365 5100
Phone 1300 GOLDAIR (1300 465 324)
www.goldair.com.au