TERRAIN 04620V Pentagon Blind Arc Door Instruction Manual

TERRAIN 04620V Pentagon Blind Arc Door

Product Information

The product is a Range Blind with model number 04620V. It is manufactured by Terrain Outdoor and can be contacted at 989-575-3122. The blind is made of industrial-grade UV-protected high-density polyethylene material, making it resistant to sun, moisture, and normal temperature fluctuation. It has a maximum occupancy of one adult with gear and weighs 114 lbs. The blind has an olive-drab exterior color and a black interior. It comes with various components and hardware listed in the parts list below.

Parts List:

Tools Needed:

• Phillips Screw Driver
• Socket Wrench OR Adjustable Crescent Wrench

Specifications:

• Size: 76x76x85 (LxWxH)
• Weight: 114 lbs
• Maximum Occupancy: One adult with gear
• Color: Olive drab exterior, black interior

Storage and Care:
To extend the life of the product, it is recommended to keep it out of prolonged exposure to sunlight in a shaded area and away from high winds. When not in use, ensure that all windows and the door are closed tightly. The product is made of UV-protected material and is resistant to sun, moisture, and normal temperature fluctuation. It is advised to use a wet rag and mild detergent to remove surface blemishes and stains. Rinse well after cleaning. Bleach-based cleaners may be used sparingly on the wall, roof, and door panels to remove stains, but avoid using them on the windows. Only use a non-abrasive cloth and a cleaner labeled for use with acrylic or plexiglass to clean the windows.

Product Usage Instructions

1. Read the entire manual before assembling or using the product.
2. If there are any missing or broken components, do not return to the retailer. Contact the manufacturer at 989-575-3122. Provide the reference blind model (RANGE 04620V) and the specific component names from the parts list.
3. If you find damaged or missing parts in a newly purchased product, contact the manufacturer at 989-575-3122 for replacements.
4. Before assembly, ensure that you have all the required parts and hardware listed in the included items and hardware list.
5. Use a Phillips screwdriver or a socket wrench/adjustable crescent wrench as needed for assembly.
6. Follow the assembly instructions provided in the manual to assemble the range blind.
7. If you have any questions about the assembly, installation, or use of the product, contact one of the customer service representatives at 989-575-3122. Provide the product model number (04620V) and component part number for better assistance.
8. After assembly, place the range blind in a suitable location, away from high winds and prolonged sunlight exposure.
9. Ensure all windows and the door are closed tightly when the blind is not in use.
10. For cleaning, use a wet rag and mild detergent to remove surface blemishes and stains. Rinse well after cleaning. Use bleach-based cleaners sparingly on the wall, roof, and door panels, avoiding the windows. Clean the windows using a non-abrasive cloth and a cleaner labeled for use with acrylic or plexiglass.

For any further assistance or inquiries about this product or any other product from the complete line, do not hesitate to contact customer service at 989-575-3122.

READ THIS MANUAL IN ITS ENTIRETY BEFORE ASSEMBLING OR USING THIS PRODUCT.

ATTENTION!
DO NOT RETURN TO THE RETAILER. IF THERE ARE ANY MISSING OR BROKEN COMPONENTS PLEASE CONTACT THE MANUFACTURER AT 989-575-3122. REFERENCE BLIND MODEL: RANGE 04620V AND THE SPECIFIC COMPONENTS NAME FROM THE PARTS LIST.

RANGE BLIND USAGE INSTRUCTIONS AND WARNINGS

Thank you for your purchase of this Terrain Outdoor® Hunting Blind product. To ensure your personal safety, please take a moment to carefully read this Instruction Manual in its entirety before attempting to set-up, install, remove and/or otherwise use this Terrain Outdoor® Hunting Blind product(s). Failure to follow these instructions may result in serious injury or death!

If you have any questions about the installation, removal, and/or use of this product, or any other Terrain Outdoor® product(s) do not hesitate to call one of our customer service representatives at 989-575-3122 or feel free to visit us online at www.terrainoutdoor.com. Our customer service representatives will answer any questions you may have about any of the complete line of Terrain Outdoor® products. If you find damaged or missing parts in a newly purchased product, please contact the manufacturer at 989-575-3122 for replacements.

Please note that WARNING!
Statements have been placed throughout this Instruction Manual. These statements point out important safety information and instructions, which, if not followed could endanger the personal safety and/or property of the operator(s). It is imperative that the operator(s) of this product, or any other Terrain Outdoor® product(s) read and follow all the instructions and warnings contained in this Instruction Manual prior to attempting to use this Terrain Outdoor® product(s), or any other Terrain Outdoor® product(s). Failure to comply with these instructions and/or warnings may result in serious personal injury or death!

• WARNING! Failure to read and strictly comply with the instructions contained in this Instruction Manual may result in serious injury or death!
• WARNING! Prior to each hunt, you must inform someone of your hunting location, including the specific location of your blind and the expected duration of your hunt. Failure to follow these instructions may result in serious injury or death!
• WARNING! The safe use and operation of this product(s) is the sole responsibility of the user. It is also the sole responsibility of the owner to provide any person(s) who borrow or purchases this product(s) with these instructions. Failure to follow these instructions may result in serious injury or death!
• WARNING! Prior to each hunt, make sure that you have a signaling device (e.g., mobile phone, radio, whistle, signal flare or Personal Locator Device (PLD) in your possession and in an operable condition. This device must be within easy access shall you experience the need to contact emergency assistance. Failure to follow these instructions may result in serious injury or death!
• WARNING! This product(s) is designed for adult use only. No one under the age of 16 shall attempt to use this or any other product(s) without direct adult supervision. Failure to follow these instructions may result in serious injury or death!
• WARNING! DO NOT modify, fix/repair, alter, bend, cut, weld, drill, or heat the blind in any way without explicit authorized and written instructions from the manufacturer. Additionally, do not attach anything to your blind without explicit authorized and written instructions from the manufacturer. Failure to follow these instructions may result in a voided warranty, serious injury, or death!
• WARNING! Never use any kind of fuel-burning products (heaters, lanterns, etc.) inside this enclosure. The use of fuel-burning products can result in dangerous concentrations of carbon monoxide, a colorless and odorless gas. Breathing carbon monoxide will cause serious injury or death.
• WARNING! Always use hearing protection when discharging firearms, especially within an enclosed space.
• WARNING! This product is not fireproof. The plastic will burn if it comes into contact with an open flame or fuel source. Keep product away from direct flame. Failure to follow these instructions may result in serious injury or death!
• WARNING! This product is for hunting purposes only! It is not to be used as a camping tent or for any other function. Failure to follow this warning may result in serious injury or death!
• WARNING! Practice safe and proper firearms handling while using this product. Keep firearm or weapon unloaded until seated in the blind and no further movement is expected. Unload the firearm or weapon prior to exiting the blind. Failure to follow this warning may result in serious injury or death!
• WARNING! Practice safe and proper firearms handling while using this product. Keep the firearm pointed in the direction of the least consequence with the safety ON in a SAFE position at all times. Failure to follow this warning may result in serious injury or death!
• California Prop 65 Warning: This product may contain a chemical known to the state of California to cause cancer, birth defects, or other reproductive harm.

If you have any questions about the assembly, installation or use of this product, or any other product, please do not hesitate to call one of our customer service representatives at 989-575-3122 and they will answer all questions you may have about any of the complete line of products. Please have the product model number (04620V) and component part number ready before calling to better assist you.

PARTS LIST

TOOLS NEEDED

• Phillips Screw Driver
• ⅜” Socket Wrench OR Adjustable Crescent Wrench

SPECIFICATION

• Size: 76”x76”x85” (LxWxH)
• Weight: 114 lbs
• Maximum Occupancy: One adult with gear
• Color: Olive drab exterior, black interior

STORAGE AND CARE

All Terrain Outdoor® hunting blinds are made with an industrial-grade UV Protected High-Density Polyethylene material. All components and hardware is resistant to sun, moisture, and normal temperature fluctuation. This product has a 1-year limited warranty against defects in materials and workmanship.

To extend the life of this product, keep out of prolonged exposure to sunlight in a shaded area. Keep in an area away from high winds. Make sure that all windows and the door are closed tightly when not in use. To remove surface blemishes and stains use a wet rag and mild detergent as needed. Rinse well. Bleach-based cleaners may be used sparingly on the wall, roof, and door panels to remove stains – AVOID WINDOWS. Use only a non-abrasive cloth and a cleaner labeled for use with Acrylic or Plexiglass to clean the windows.

INCLUDED ITEMS AND HARDWARE LIST

Check to make sure you have all the required parts and hardware. If you find damaged or missing parts in a newly purchased product, please contact the manufacturer at 989-575-3122 for replacements.

ASSEMBLE INSTRUCTION

ATTENTION!
DO NOT RETURN TO THE RETAILER. IF THERE ARE ANY MISSING OR BROKEN COMPONENTS PLEASE CONTACT THE MANUFACTURER AT 989-575-3122. REFERENCE BLIND MODEL: RANGE 04620V AND THE  SPECIFIC COMPONENTS NAME FROM THE PARTS LIST.

STEP 1:
Attach (2) common sidewall [03864V-A] panels together using (5) Bolt ¼-20 x 1-¼” [2020], (5) Washer ¼ ID ⅝ OD [3014], and (5) Wing Nut ¼-20 [6013].

NOTE:
When assembling, be sure that the bolt is inserted from the exterior and the washer and wingnut are from the interior. Make sure window openings are all towards the top of the assembly.

STEP 2:
Repeat STEP 1 to attach the 3 other common sidewall [03864V-A].

STEP 3:
Attach (1) Door/Frame Assembly [004627V-A] panels to the assembly using (5) Bolt ¼-20 x 1-¼” [2020], (5) Washer ¼ ID ⅝ OD [3014], and (5) Wing Nut ¼-20 [6013].

STEP 4:
Finish fastening the Door/Frame Assembly [04627V-A] panels to the assembly using (5) Bolt ¼-20 x 1-¼” [2020], (5) Washer ¼ ID ⅝ OD [3014], and (5) Wing Nut ¼-20 [6013].

NOTE:
When assembling, be sure that the bolt is inserted from the exterior and the washer and wingnut are from the interior.

STEP 5:
Lay each section of the (5) Range Roof Panel [03866V-C] so they overlap each other with the holes lined up, small ribs inside the large ribs. Fasten the (5) Range Roof Panels to the assembly using (5) Bolt ¼-20 x 1-¼” [2020], (5) Washer (¼ID Rubber) [3013], and (5) Wing Nut ¼-20 [6013]. Fasten only through the OUTSIDE HOLES on each side. Do not tighten all the way.

STEP 6:
Locate the Range Roof Cap [04630V] and align the roof cap over the center of the roof assembly. The roof assembly will be required to be standing on its side. Then attach the roof cap with (5) Bolt ¼-20 x 1-¼” [2020], (5) Washer (¼ID Rubber) [3013], and (5) Wing Nut ¼-20 [6013]. Once the bolts are in place, tighten down.

NOTE:
When assembling, be sure that the bolt is inserted from the exterior and the washer and wingnut (NOT SHOWN IN PICTURES) are from the interior.

STEP 7:
Align the Range Roof Assembly above the wall and door panels so that the holes overlap each other. Fasten the Range Roof assembly to the door/wall assembly with (5) Bolt ¼-20 x 1-¼” [2020], (5) Washer ¼ ID ⅝ OD [3014], and (5) Wing Nut ¼-20 [6013]. Fasten through the middle hole on each roof panel and the slots on the wall/door panels.

NOTE:
When assembling, be sure that the bolt is inserted from the exterior and the washer and wingnut (NOT SHOWN IN PICTURES) are from the interior.

Roof Support Note (optional):
This product is not designed for sustained snow load. If the product will be unattended for any period of time through the winter months we recommend a 2×4 support being placed in the center of the structure. We recommend a 83″ length. Cut a 2×4 to this measurement. Lodge the support between the floor and the roof when blind is not in use. This will help support the roof under heavy snowfall.

NOTE:
If your roof does collapse it can be reset by disconnecting the roof and placing it on the ground. Once it is on the ground, stand on the roof to push the dent out and back into shape.

STEP 8:
Finish fastening the Range Roof assembly to the assembly with (10) Bolt ¼-20 x 1-¼” [2020], (10) Washer ¼ ID ⅝ OD [3014], and (10) Wing Nut ¼-20 [6013]. Fasten through the two outer holes on each roof panel and the slots on the wall/door panels.

NOTE:
When assembling, be sure that the bolt is inserted from the exterior and the washer and wingnut (NOT SHOWN IN PICTURES) are from the interior.

STEP 9:
Install the Door Handle [INS-TERRAIN-HANDLE] into the Door/Frame Assembly [04627V-A] panel. This step does not require any additional hardware.

NOTE:
When assembling, be sure the handle is in the correct orientation as shown. The TERRAIN text faces up, the LATCH faces towards the frame, and the WEATHER COVER is on the exterior.

STEP 10a:
Install the Door Handle [INS-TERRAIN-HANDLE] into the Door/Frame Assembly [04627V-A] from the exterior of the panel. Insert the tabs near the latch on the Door Handle into the slot as shown. Slide the partially installed handle towards the door frame.

STEP 10b:
Push the back set of tabs on the Door Handle through the slot. This is a tight fit, designed to be a snap fit. The tabs are angled to assist with installation.

STEP 10c:
While applying pressure in on the handle to keep the tabs in the slot, slide the handle towards the door frame.

NOTE:
While the handle is removable, it is designed to be installed only once. Refrain from removing and reinstalling the handle more than needed.

DETAILED VIEW – INTERIOR

STEP 11:
Install (10) Window Latches [INS-TERRAIN-TURN-BUTTON] into the Door/Frame Assembly [04627V-A] and (4) Common Sidewall Panels [03864V-A]. Use (10) Bolts (10-32 X ¾”) [2023] and (10) Nuts (10-32 Lock Nut) [6014].

NOTE:
Install using Bolt and Window Latch from the interior and the Nut from the exterior. Tighten just enough to keep latches open or closed – DO NOT OVERTIGHTEN.

STEP 12:
Attach (5) Windows [INS-COMMON TAB PLEXIGLASS] to (5) Window Hinges [INS- COMMON LIVING HINGE]. Groove in Window must snap into place on tab of Window Hinge. If installed correctly and fully, a small snapping noise can be heard.

NOTE:
Window Hinges may be loose in the box OR connected to the wall/door panels.

STEP 13:
Attach (5) assembled Window/Hinges to the Sidewalls and Door panel. Install from the interior of the blind, and keep the Tab on the Hinge and the Groove on the Window facing UP. Press fully over edge of window cut out. If installed correctly and fully, a small snapping noise can be heard.

NOTE:
The window is designed to fold open completely. If the Hinge binds on itself during opening or closing it is installed incorrectly.

READ THIS MANUAL IN ITS ENTIRETY BEFORE ASSEMBLING OR USING THIS PRODUCT.

Contact Information

www.terrainoutdoor.com.
989-575-3122

References

• Terrain Outdoor - Hunting Gear for the Avid Hunter

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>