HAGOR 3334 CPS From Wall Back Instruction Manual
- June 12, 2024
- HAGOR
Table of Contents
HAGOR 3334 CPS From Wall Back
Product Information
The product is a CPS (Ceiling Plate System) designed for wall-mounted TVs with screen sizes ranging from 42 to 55 inches. The product is identified by the article number 3334. It is important to handle the components carefully during installation and protect them if necessary, as they are of considerable value. Additionally, the installation area should be secured to prevent injuries and material damage.
The materials included in the scope of delivery may not be suitable for all installation sites. It is recommended to check the suitability of the materials in advance and replace them with suitable ones if needed. If you have any doubts or questions regarding the installation of the product, it is advised to contact the manufacturer or other trained specialists for assistance.
Product Usage Instructions
- Ensure that you have received all the necessary components mentioned in the scope of delivery.
- Identify and separate the components labeled A, B, C, D, E, F, G, H, I, and J.
- Refer to the provided diagram to understand the assembly process.
- Start by attaching component A using 4x M8x62 screws.
- Attach components H using 4x M8x70 screws.
- Attach components J using 4x M8 screws.
- Attach component F1 and F2 to component A using the provided screws.
- Attach component B to component A using 2x M8x12 screws.
- Attach components C to component F1 and F2 using the provided screws.
- Ensure that the arrow on component G is pointing upwards.
- Attach components G, M-C, M-D, M-G, M-E, and M-H as shown in the diagram.
- Follow the specific TV mounting instructions provided by the TV manufacturer.
- Refer to the dimensions given to determine the appropriate VESA measurements for mounting.
- Ensure that the TV is securely mounted and aligned properly.
Note: It is recommended to refer to the detailed installation instructions provided in the user manual for a more comprehensive understanding of the installation process.
Caution
- Technical devices are of considerable value. You should therefore handle the components carefully during installation and protect them if necessary.
- If necessary, the installation area should also be secured. Falling parts can cause injuries and material damage.
- The materials included in the scope of delivery may not be suitable for the special conditions at the installation site. Please check this in advance and replace it with suitable materials if necessary.
- If you are unsure about the installation of the product or have any questions, please contact us or other trained specialists.
Scope of delivery
Installation Instrcutions
- Choose the appropriate screws, washers and spacers (if necessary) according to the type of screen.
- Center the adapter brackets on the back of the display as shown, and screw the brackets onto the display, being sure to not over-tighten.
Dimensions
HAGOR Products GmbH
- Oberbecksener Straße 97 D-32547 Bad Oeynhausen
- Telefon: +49(0)57 31-7 55 07-0
- Mail: [email protected]