HAGOR 3325 CPS Mobile Stand Installation Guide
- June 12, 2024
- HAGOR
Table of Contents
CPS Mobile Stand 2x 55 – 65“
Art.-Nr.: 3325
Installation manual
3325 CPS Mobile Stand
Caution!
Technical devices are of considerable value. You should therefore handle the
components carefully during installation and protect them if necessary.
If necessary, the installation area should also be secured. Falling parts can
cause injuries and material damage.
The materials included in the scope of delivery may not be suitable for the
special conditions at the installation site. Please check this in advance and
replace it with suitable materials if necessary.
If you are unsure about the installation of the product or have any questions,
please contact us or other trained specialists.
Scope of delivery
- Center the adapter brackets on the back of the display as shown, and screw the brackets onto the display, being sure to not over-tighten.
- Choose the appropriate screws, washers and spacers (if necessary) according to the type of screen.
-20° is the natural angle and the safety pin is unnecessary.
Dimensions
HAGOR Products GmbH
Oberbecksener Straße 97
D-32547 Bad Oeynhausen
Telefon: +49(0)57 31-7 55 07-0
Mail: [email protected]