euker PB6 Portable Charger with Built in Cables User Manual
- June 15, 2024
- euker
Table of Contents
euker PB6 Portable Charger with Built in Cables
Model: PB6
Thank you for choosing the Euker PB6 power bank! Please read this manual before first use and keep it handy for future reference.
Product Description
Package Contents
Specifications
- Micro Input: 5V=2A, 9V=2A
- USB-C Input: 5V=3A, 9V= 2A
- USB-C Output: 5V=3A, 9V=2.22A, 12V= 1.SA
- USB-A Output: 5V=3A, 9V=2A, 12V=1.5A, 5V=4.5A, 4.SV=SA 1#Cable Output: 5V=3A, 9V=2A, 12V=1.5A, 5V=4.5A, 4.SV=SA 2#Cable Output: SV= 2A
- Battery Type: Lithium Polymer
- Battery Capacity: 10000mAh/3.7V/37Wh
- Rated Capacity: 6000mAh(SV= 2.4A)
- Size: 5.84×2.68×0.67in/148.4x68x17mm
- Weight: 8.3oz/235g
Operating Instructions
- Charging for the power bank
Connect the USB-A port of the USB-A to USB-C charging cable to the power supply device.The power supply device could be the AC charger, as shown in picture(1) or the computer’s USB-A interface as shown in (2), and then connect the other end into the USB-C port of the power bank to keep the power bank charged.
- Power on
- Connect your phone to the output port of the power bank and the charging function is automatically turned on.
- Short press the button: Power on (The power indicator is on).
- Shut down
- Double-click the button to shut down.
- In the normal discharge mode: The discharge function is turned off about 35 seconds after the mobile phone has been disconnected from charger or the mobile phone has been fully charged. The power bank will then be turned off and enter a shutdown state.
- Description of charging power display
Status| FastCharging & SlowCharging| Battery level (0%-25%)| Battery level (25%-50%)| Battery level (50%-75%)| Battery level (75-100%)| Battery level (100%)
---|---|---|---|---|---|---
| 25%battery| | | | |
Charging
| indicator is purple when fast charging, andblue
when slow
| 25%battery indicator flashing| 50%battery indicator flashing|
75%battery indicator flashing| 100%battery indicator flashing|
Allfour battery indicator
| charging| | | | |
- Description of discharging power displa y
Status
| Fast
Charging
& Slow Charging
| Battery level (0%)| Batte r level (0%-5%)| Battery level
(5%- 25%)
| Batter level
(25-50%)
| Battery level
(50-75%)
| Battery level (100%)
---|---|---|---|---|---|---|---
Discharging
| 25%
battery
indicator
is purple
when fast
charging, and blue when slow cha r ging
| ****
battery indicators a r e off
| ****
battery indicato r flashing
| ****
the battery indicator is always on
| ****
Two battery indicators are always
| ****
Three battery indicators are always
| ****
Fou r battery indicators are always on
Important Safety Instructions
When using this product, basic precautions should always be followed, including the following:
- Store the product in a cool, dry place.
- Do not store the product in a hot or humid environment.
- Do not dispose of the product in heat or fire.
- Do not clean the product with harmful chemicals or detergents.
- Operating temperature should be between 0°C to 45°C/32°F to 113° F.
- Do not disassemble the product. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or injury to persons.
- lf the product is not used for long periods of time, you should charge and discharge it once every three months.
- When charging a device, the product may feel warm. This is a normal operating condition and should not be a cause for concern.
- In normal conditions, the battery performance will decline over several years.
- Misuse, dropping, or excessive force may cause product damage.
- When disposing of secondary cells or batteries, keep cells or batteries of different electrochemical systems separate from each other.
- Be aware that a discharged battery may cause fire or smoke. Tape the terminals to insulate them.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
EU Representative: Ma Wei Aasheng International Investment Consulting
GmbH
Address: Rodenberger Allee 23, 31542 Bad Nenndorf. Germany Tel: +49
15206266951
UK Representative: CET Product Service Ltd.
Address: Beacon House Stokenchurch Business Park, lbstone Rd,
Stokenchurch High Wycombe HP14 3FE UK
Tel: +447419325266
Customer Service:
support@eukers.com
www.eukers.com
Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>