MELODY SUSIE Aurora 4 Pro LED-UV Nail Lamp Instruction Manual
- June 12, 2024
- MELODY SUSIE
Table of Contents
MELODY SUSIE Aurora 4 Pro LED-UV Nail Lamp Instruction Manual
‘Thank you for choosing MelodySusie! Please read this user guide carefully and keep it in an accessible location so you may refer toit later.
IMPORTANT SAFEGUARDS READ ALL INSTRUCTIONS BEFORE USING
To reduce the risk of burns, electrocution, fire or injury to persons.
Please be sure to read the safety instruction as follow to avoid potential hazards that could result in personal injuries or damage to the device.
Check before Using
- Check the power supply cord before the first time use and during the lite of the device. Do ot use the device f it has a damaged cord or plug,or ifitis not working properly.
- Do ot plug the device into a voltage system that is not specified on the device or charger. Use with improper voltage will damage the device and VOID warranty.
- Use the original charger only.
Note for Using
- To prevent electric leake and shock or fire, do not draw out the connecting wires during use or touch the plug with the wet hand. Turn the power off after use.
- Misuse, dropping or excessive force may cause device damage.
- Minor should ot use this device without parental consent and supervision.
- Do ot place any object on the nail lamp, as it may negatively affect the performance.
Maintenance Work
- Do not disassemble the device. Doing so could be dangerous and constitutes voiding warranty conditions.
- Do not keep the device in a metal box, car, or other places athigh temperature(more than 50°C). Keep the handpiece dry and away from oi and grease.
- Donot store the device inahot or humid environment. Storeitin acool and dry place.
- Keep the electrical cord away from heated surfaces.
- Donot dispose of the device in heat or fire.
- Do not clean the device with harmful chemicals or detergents.
Note For Injury
- the nails as well.
- Do not use the device if you have an open wound on your nail or hand.
- 1fyou have any skin diseases, heat-sensitive, allergic reactions, onychomycosis, or any other disorder, you should consult your doctor and medical professionals before using the device.
The operator shall be responsible for any consequences including product damage or accidents f not strictly complies with the instructions.
If you require any technical support, please contact us.
How to Use?
- Time Display
- DC Outlet
- 30s Timer
- 60s Timer
- 90s Timer
Step1: Connect the power cord to asecure outlet.
Step2: Put your hands in and the lamp will automatically turn on(default
30s).
Step 3: To Stop drying, simply remove your hands when drying. or
Step 4: Choose apre-set timer button (30s, 60s, 90 ) as needed. The lamp
willrun until the preset time has elapsed.
Problems and Terms of Settlement
| Malfunction | Reasons | Solutions |
|---|---|---|
| The nail lamp does notwork well. /The beads donot turn on. | The power cord is | |
| loose orpoorly connected. | Reconnect the powercord and make sure it isproperly |
connected.
Malfunction| Reasons| Solutions
The nail lamp does not work well /The beads do not turn on.| The power cord is
not compatible with outlet.| Please kindly note the plug is US plug. If
youwant to use the nail lamp in other countries or areas, please use it with a
universal adaptor.
| The LCD screen has display. The countdown is normal But the LED light beads
don’t turn 011.| The LED light beads orthe lamp’s internal circuit is damaged.
| The LED light beads are defective, or the lamp’s internal circuits are
damaged.| When the light beads are damaged, pleasecontact MelodySusie customer
service team for help.
| When pressing the button. the lamp doesn’t have any response,| Please check
whether the surface of the button has water or dust.Clean the nail lamp with a
dry cloth.
The gel nail polish cannot be cured or dried completely.| hsufficient curing
time may result in incomplete curing of your gel nail polish. Thecuring time
requirementsvary from different gel polish brands and colors.complete.| Please
try to extend the curing time appropriately until the nail surface is
completely cured. For best results, avoidmoving your hands too much until
curing is
| The light to your nail surface is not enough.| Please adjust the angle of
your nail surface to face the light straightly to ensure sufficient
illumination.
Malfunction| Reasons| Solutions
The gel nail polish cannotbe cured or driedcompletely.| Please check whether
thelight beads of nail lamp areaging.| The light beads are agedand need to
replace.
| Use the incompatible polish,such as regular nail polish, naillacquer.|
Please use LED, UV gelnail polish, or use acompatible nail lamp.
| The gel polish is a bit tackyafter drying.| Please wipe your nailsurface
with a gentlecleanser or alcohol preppads.
Specifications
- Input voltage range: 100-240V 50/60Hz
- Items included: lx Aurora 4 PRO UV LED Nail Lamp
- lx Power Adapter 1 x User Manual
E-mail: [email protected]
E-mail: [email protected]
Website: www.melodysusie.com
Warranty and Customer Service
MelodySusie offers a 6 months limited warranty on quality related issues. Please apply for your extra 6 months warranty extension and download the instruction manual in other languages by registering on viww.melodysusie.com if needed.
Thank you for purchasing from MelodySusie. You are welcome to share your experience after receiving the product. Please contact us for any technical support if needed.
www.melodysusie.com
US Service: [email protected]
UK Service: [email protected]
FR Service: [email protected]
DE Service: [email protected]
Whipple Rd, Union City, CA 94578
AMZLAB GmbH Laubenhof 23, 45326 Essen, Germany
THEMIS AR support ltd. 85 Great Portland St. London, United Kingdom, W1W 7LT