CANOPIA 3×7/1×2 Garamond Door Awning Kit Instruction Manual

: June 12, 2024
: CANOPIA

Table of Contents

CANOPIA 3×7/1×2 Garamond Door Awning Kit
Product Information
GARAMOND DOOR AWNING INFORMATION
BEFORE ASSEMBLY
DURING ASSEMBLY
CARE & MAINTENANCE
TOOLS & EQUIPMENT
Contents
TOOLS AND DIMENSIONS
HOW TO FIX
CANOPIA 3 years Limited Warranty
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CANOPIA 3×7/1×2 Garamond Door Awning Kit

CANOPIA-3x7-1x2-Garamond-Door-Awning-Kit-PRODUCT

Product Information

Product Name: GaramondTM 3×7 / 1×2
Manufacturer : Palram Industries Ltd.
Website : www.canopia.com
Certification : EN
14963 :200, Registered Design Recyclable

Product Usage Instructions

1. Before starting the assembly, carefully read the instructions provided in the user manual. Keep the instructions in a safe place for future reference.
2. Use the provided silicone lubricant spray on the frame to help slide the panels into the profiles. Do not spray the panels themselves.
3. If necessary, use a rubber mallet to assist with the assembly.
4. Ensure that you remove the covering plastic film from both sides of the panel before installation.
5. Panels with the stamped words “THIS SIDE OUT” must be facing outwards to provide full UV protection. Remove any plastic stickers as panels are locked in place.
6. Pay attention to steps marked with dashed outlines, as they are specific to extension kits only. Some steps may not be relevant for assembling a single product.
7. Screws may need temporary tightening to prevent profiles from sliding out during assembly. Tighten all screws once the assembly is completed.
8. For care and maintenance, follow the instructions provided in the user manual.

WE ARE HERE TO HELP

General Questions: canopia.com/contact-us

+972-4-848-6816 | customer.service@palram.com

USA
877-627-8476 | generalsupport@poly- tex.com
CANADA
905-5646007 | sales@footprintproducts.com
GERMANY
0180-522-8778 | customer.serviceDE@palram.com
ISRAEL
04-848-6800 | customer.service@palram.com
AUSTRALIA
03-9219-4444 | salesvic@palram.com
CYPRUS
0224-971-13 | alpaco@alpacodomica.com | www.alpacodomica.com
SWITZERLAND
062-287-33-77 | info@ritter.ch
NEW ZEALAND
0800 800 880 | customer.service@palram.com

HAVE A CONCERN ? WE CAN HELP

Before returning your purchase:

You didn’t find what you were looking for? We can help at canopia.shop/support
Still can’t find what you are looking for?Please see next page for local customer care.

GARAMOND DOOR AWNING INFORMATION

SAFETY ADVICE

It is of utmost importance to assemble all of the parts according to the directions. Do not skip any steps.
We strongly recommend using work gloves during panel sliding.
Some parts may have sharp edges. Please be careful when handling components.
Always wear shoes and safety goggles when working with extruded aluminum.
If using a step ladder or power tools make sure that you follow the manufacturer’s safety advice.
Keep children away from the assembly area.
Do not touch overhead power cables with the aluminum proﬁles.
Do not attempt to assemble the product in windy or wet conditions.
Dispose of all plastic bags. Keep them out of reach of small children.
Do not climb or stand the roof.
Do not hang or lay the proﬁles.
Do not position your product in an area exposed to excessive winds.
Do not attempt to assemble this product if you are tired, have taken drugs or alcohol or if you are prone to dizzy spells.
Make sure there are no hidden pipes or cables in the wall before inserting the pegs.
This product is designed to be used mainly as a Door Awning.
Heavy snow load on the roof can make it unsafe to stand below or nearby.
The wall anchoring kit supplied with this product is suitable for concrete or solidbrick walls. Other wall types need an accordant wall ﬁxation kit.

BEFORE ASSEMBLY

Selecting a site:
- Choose your site carefully before beginning assembly.
- Consider the door’s opening – inside or outside.
- The product must be positioned and ﬁxed on a ﬂat level surface.
This is a multi-part assembly best achieved by two people. Allow at least half a day for the assembly process.
Take all components & parts out of the packages.
- Sort the parts and check against the content parts list.
Parts should be laid out close at hand. Keep all small parts (screws etc.) in a bowl so they do not get lost.
Please note multi-sided proﬁles are used in this Door Awning. As a result some holes in the proﬁles are not used during assembly.
Please review entire instructions before starting. Carry out the assembly steps in exact order.
Please consult your local authorities if any permits are required prior to constructing the product.

IMPORTANT

During assembly use a soft surface below the parts to avoid scratches and damages.
You are solely responsible for determining whether the handling, storage, assembly, installation or use of this product is safe and appropriate in any location or for any given application.
The manufacturer is not responsible for any damages or injury to you, any other person or any property resulting from the improper handling, storage, installation, assembly or use of this product, or the failure to follow the manufacturer’s written instructions regarding the handling, storage, installation, assembly and use of this product.
This product is intended for normal residential use only. Do not use this product for any application that is not recommended in these instructions or building codes in effect in location where this product will be used. Always take care and use appropriate safety equipment (including eye protection) when assembling or installing this product.
We recommend checking for restrictions or covenants for building this product in your area. In addition we advise to check if you need to submit any forms or if any permit is required prior to building the product.

DURING ASSEMBLY

During assembly, you will encounter different icons for different products. Please see below for more information:

You may use silicone lubricant spray on the frame in order to help you slide the panels into the proﬁles. Do not spray the panels.
Use a rubber mallet if necessary.
Make sure you remove the covering plastic ﬁlm from both sides of the panel.
All panels with the stamped words “THIS SIDE OUT” must be facing out to create full UV protection. Remove plastic sticker as panels are locked in place.
Steps marked with dashed outlines refer to Extensions only. Some of the steps are irrelevant for an assembly of a single product. When assembling a single or an extended product, some parts may be surplus.
These 2 icons below indicate if screw’s tightening is required or not. Temporary tightening of a few screws may be needed to prevent a proﬁle from sliding out.
Tighten all screws once assembly is completed.

CARE & MAINTENANCE

When your product needs to be cleaned, use a mild detergent solution and rinse with cold clean water.
DO NOT use acetone, abrasive cleaners or other special detergents to clean the panels.
Clean the product once assembly is complete.

TOOLS & EQUIPMENT

CANOPIA-3x7-1x2-Garamond-Door-Awning-Kit-
FIG-1

IMPORTANT ASSEMBLY STEPS

When encountering this information icon during assembly, please refer the relevant assembly step for important additional comments.

Step 10

After attaching the panel to the wall, tighten the screws.
To not overtighten to allow expansion and contraction of the panel.

TOOLS AND DIMENSIONS

CANOPIA-3x7-1x2-Garamond-Door-Awning-Kit-FIG-3

HOW TO FIX

CANOPIA-3x7-1x2-Garamond-Door-Awning-Kit-FIG-4

CANOPIA 3 years Limited Warranty

Palram Canopia Ltd (Company number: 512106824) whose registered office is at Teradion Industrial Park, M.P Misgav 20174, Israel (“Canopia”) warrants that the product will be free from defects in material or workmanship for a period of 3 years from the original date of purchase subject to the definitions, terms and conditions
contained in this warranty.

Conditions

This warranty shall be valid only if the product is installed, cleaned, handled and maintained in accordance with Canopia’s written recommendations (Recommended Use: Hobby Gardening).
Without derogating from the above, damage caused by use of force, incorrect handling, inappropriate use, neglectful use or assembly or maintenance, accidents, impact from foreign objects, vandalism, pollutants, alteration, painting, connecting, gluing, sealing not in accordance with the user’s manual, or damage resulting from cleaning with incompatible detergents and minor deviations of the product are not covered by this warranty.
This warranty does not apply to damage resulting from “force majeure”, which includes but is not limited to, hail, storm, tornado, hurricane, blizzard, flood, fire effects.
This warranty is void if structural parts and components used are not compatible with Canopia’s written recommendations.
This Warranty applies only to the original purchaser of the product. It does not extend to any other purchaser or user of the product (including, but not limited to, any person who acquires the product from the original purchaser).
Any other use for any other purpose is under user’s sole responsibility. Canopia disclaims and assumes no liability for any use not recommended by this warranty.

Claims and Notifications

Every warranty claim must be notified in writing to Canopia within 30 days after the discovery of the defective product, enclosing the original sales receipt and this warranty.
The claimant must allow Canopia to inspect the product involved and the installation site itself while the product is still in its original position and has not been
removed or moved or altered in any way and/or return the product to Canopia for testing.
Canopia reserves the right to investigate independently the cause of any failure.

Compensation

If a claim under this Warranty is properly notified and approved by Canopia, the purchaser, at Canopia’s option, may either (a) purchase a replacement product or part/s; or (b) receive refund of the original product or part/s purchase price, all in accordance with the following schedule:
For avoidance of any doubt, calculation for a determination regarding compensation for defective part/s, according to the schedule above, will be based on the contribution of the defective part to the original cost of the product. Canopia reserves the right to provide substitutions if the product or any part of it is unavailable or obsolete.
This warranty does not cover any costs and expenses of removal and installation of the product or taxes or shipping cost or any other direct or indirect loss(es) which may result from the product failure.

General Conditions and Limitations

OTHER THAN HAS BEEN SPECIFICALLY STATED IN THIS WARRANTY, ALL OTHER WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PRTICULAR PURPOSE ARE EXCLUDED SO FAR AS THE LAW PERMITS.
EXCEPT WHERE WE HAVE SPECIFICALLY STATED IN THIS WARRANTY, CANOPIA SHALL NOT BE LIABLE FOR ANY LOSSES OR DAMAGES THE PURCHASER SUFFERS DIRECTLY, INDIRECTLY, OR AS A CONSEQUENCE OF USING, OR IN ANY OTHER WAY CONNECTED TO THE PRODUCT.
IF CANOPIA IS PROHIBITED UNDER ANY APPLICABLE LAW FROM EXCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE IN RELATION TO THE PRODUCT, THE DURATION OF ALL SUCH IMPLIED WARRANTIES IS EXPRESSLY LIMITED TO THE DURATION OF THIS WARRANTY OR, IF LONGER, THE MAXIMUM PERIOD REQUIRED BY APPLICABLE LAW.
THE PURCHASER IS SOLELY RESPONSIBLE FOR DETERMINING WHETHER THE HANDLING, STORAGE, ASSEMBLY, INSTALLATION OR USE OF THE PRODUCT IS SAFE AND APPROPRIATE IN ANY LOCATION, FOR ANY GIVEN APPLICATION OR IN ANY GIVEN CIRCUMSTANCE. CANOPIA IS NOT RESPONSIBLE FOR ANY DAMAGES OR INJURY TO THE PURCHASER, ANY OTHER PERSON OR ANY PROPERTY RESULTING FROM THE IMPROPER HANDLING, STORAGE, INSTALLATION, ASSEMBLY OR USE OF THE PRODUCT OR THE FAILURE TO FOLLOW THE WRITTEN INSTRUCTIONS REGARDING THE HANDLING, STORAGE, INSTALLATION, ASSEMBLY AND USE OF THE PRODUCT.
UNLESS OTHERWISE EXPRESSLY INDICATED BY CANOPIA, THE PRODUCT IS INTENDED FOR NORMAL RESIDENTIAL AND COMMERCIAL USE ONLY. CANOPIA IS NOT RESPONSIBLE FOR ANY LOSS, DAMAGE, COST OR EXPENSE RESULTING FROM ANY USE OF THE PRODUCT FOR ANY PURPOSE THAT IS NOT RECOMMENDED BY THE WRITTEN INSTRUCTIONS OR THAT IS NOT PERMITTED BY ANY APPLICABLE LEGISLATION OR OTHER CODES IN EFFECT IN THE LOCATION WHERE THE PURCHASER WILL USE THE PRODUCT.