ANKER PowerExpand 8 In 1 USB-C PD 10Gbps Data Hub User Guide

June 12, 2024
Anker

ANKER PowerExpand 8 In 1 USB-C PD 10Gbps Data Hub

ANKER Power Expand 8 In 1 USB-C PD 10Gbps Data Hub

At a Glance

At a Glance

Item

|

Description

---|---
1. USB-C Connector| Plug into the MacBook’s USB-C port
2. PD-IN Port| Connect to a USB-C PD charger to charge your devices
3. USB-C Port| 10 Gb/s data transfers
4. HDIV I Port| Connect to a device with an HDMI resolutions up to 4K@60 Hz port to stream video at
5. Ethernet Port| Connect to a router or modem at 10/100/1000 Mbps
6. Power Indicator| Turns white when powered on
7. SD Card Slot| Insert an SD 3.0 card to copy files to and from your MacBook
8. microSD Card Slot| Insert a microSD card to copy files to and from your MacBook
9. USB-A Port| Connect to a USB-A device to support data transfer at speeds up to 10 Gb/s

Specifications

| Data Speed| 10 Gbps
---|---|---
| Supported Systems| Windows 10 / 8 / 7 / Vista / OS XP, Mac OS X 10.2 (and above), Chrome OS
| Size| 121 × 55 × 15.3 mm / 4.7 × 2.2 × 0.6 in
| Weight| 109g / 3.8 oz

Important Safety Instructions

  • Avoid dropping.
  • Do not disassemble.
  • Do not expose to liquids.
  • For the safest and fastest charge, use original or certified cables
  • This product is suitable for moderate climates only
  • The maximum ambient temperature when using this product must not exceed 104°F / 40°C.
  • Open flame sources, such as candles, must not be placed near this product.
  • Only use a dry cloth or brush to clean this product.

Declaration of Conformity

Hereby, Anker Innovations Limited declares that the product type A8383 is in compliance with
Directive 2014/30 /EU & 2011/65/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.anker.com/products
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong

Anker Innovations Deutschland GmbH | Georg-Muche-Strasse 3, 80807 Munich, Germany

Declaration of Conformity

Hereby, Anker Innovations Limited declares that the product type A8383 is in compliance with the following Directives:
The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic
Equipment Regulations 2012
Electromagnetic Compatibility Regulations 2016
The full text of the GB declaration of conformity is available at the following internet address: https://www.anker.com
Anker Technology (UK) Limited,
GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This device complies with Industry Canada license-ICES-003. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.

Logo The Adopted Trademarks HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

Customer Service

18-Month Limited Warranty

Lifetime Technical Support

support@anker.com

(US/CA) +1 (800)988 7973
(UK) +44 (0) 1604 936200

Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty.

For FAQs and more information, please visit:

anker.com/support

@Anker
@Anker Japan
@Anker Deutschland

@AnkerOfficial
@Anker_JP

@Anker

Logo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals