NOVUS NVE-BRV100COR Corner Bracket Installation Guide
- June 12, 2024
- Novus
Table of Contents
NOVUS NVE-BRV100COR Corner Bracket
Product Information
Bracket for corner mounting at an angle of 28 °, made of aluminum with a black coating, designed for the Novus 100 series video door entry panels.
Package Contest
-
Corner bracket
-
Short manual
-
2x Fixing screw
Installation
- Set the panel in the most convenient position as shown in the pictures above. Avoid direct sunlight from the camera and very shaded places.
- The suggested mounting height is 1.5 – 1.6 meters.
- Prepare the hole at the correct height in the wall
- Remove the wall mount from the panel.
- Attach the wall bracket to the corner bracket with the mounting screws provided with the corner bracket.
- Attach the bracket to the wall with the wall plugs and mounting screws provided with the panel.
- Pass the cables through the wall and the bracket, then connect the RJ-45 connector to the panel as shown in the diagram.
- Install the panel on the holder with the allen screw on the bottom of the panel. The screw is included with the panel.
Dimensions
Customer Support
ul. Putawska 431, 02-801 Warszawa
tel. 22 546 05 46, faks 22 546 05 01
e-mail:aat.warszawa@aat.pl,www.aat.pl
ul. Koniczynowa 2a, 03-612 Warszawa
tel./faks 22 81113 50, 22 743 10 11
e-mail:aat.warszawa-praga@aat.pl,www.aat.pl
Antoniuk Fabryczny 22, 15-741 Biatystok
tel./faks 85 688 32 33, 85 688 32 34
e-mail:
aat.bialystok@aat.pl,www.aat.pl
Fordonska 183, 85-737 Bydgoszcz
tel./faks 52 342 91 24, 52 342 98 82
e-mail:aat.bydgoszcz@aat.pl,www.aat.pl
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>