eitan medical avoset Infusion Pump User Guide

eitan medical avoset Infusion Pump

Product Information

The Avoset infusion pump is a medical device that is designed to deliver intermittent infusions of medication. It is equipped with various parameters and functionalities to ensure safe and accurate delivery of medication.

The pump has a user-friendly interface with buttons and a multifunction display for easy programming and monitoring of the infusion process. It also has built-in alarms and safety features to alert users in case of any issues or anomalies during the infusion. For detailed information on the usage and functionality of the Avoset infusion pump, please refer to the user manual provided with the product. Additional training materials and terms of use can be found at www.eitanmedical.com.

Product Usage Instructions

1. Review Preprogrammed Infusion Parameters:
   • Press the REVIEW multifunction button to see the infusion parameters.
   • The parameters include the dose rate, volume to be infused in a single dose, time required to complete a single dose, time between doses, number of doses, Keep Vein Open rate, time required to complete the infusion, and total volume to be infused during the infusion.
2. Infusion Programming:
   • Press the corresponding buttons to adjust the desired parameters, such as dose rate, dose volume, dose duration, dose interval, number of doses, and Keep Vein Open rate.
3. Start the Infusion:
   • Press the START button to begin the infusion process.
   • The pump will deliver the medication according to the programmed parameters.
4. Monitoring the Infusion:
   • Press the INFO multifunction button to see the infusion parameters during a dose.
   • The parameters include the time left to complete the current dose, time left to complete the infusion, total volume infused so far, and remaining volume to be infused.
5. Adjusting Parameters During Infusion:
   • Press the corresponding buttons to adjust parameters, such as dose volume, dose rate, and dose interval, while the infusion is in progress.
6. Completing the Infusion:
   • Once the desired number of doses or the total duration/volume has been reached, press the PAUSE button to temporarily stop the infusion.
   • Press the DONE button to complete the infusion.
7. Safety Precautions:
   • Always follow the instructions provided by healthcare professionals regarding medication dosage and administration.
   • In case of any issues or alarms during the infusion, refer to the user manual for troubleshooting steps or contact a healthcare professional for assistance.

Info

• This quick guide provides guidelines for the basic functionalities of the Avoset infusion pump. If you are not a clinician please refer to the Important usage information guide, for additional information and the safe use of the product.
• For clinicians using the quick guide, please refer to the user manual.
• Quick guides, user manual and training materials terms of use can be found at www.eitanmedical.com

Review Preprogrammed Infusion Parameters

• Press the REVIEW multifunction button to see the infusion parameters
• 1st parameter: The dose rate
• 2th parameter: The volume to be infused in a single dose
• 3th parameter: The time required to complete a single dose
• 4th parameter: The time between doses
• 5th parameter: The total number of doses to be delivered during the infusion
• 6th parameter: The Keep Vein Open rate
• 7th parameter: The time required to complete the infusion
• 8th parameter:  The total volume to be infused during the infusion
• Back to main display (REVIEW option is available again)

Review Infusion Parameters During Dose

• Press the INFO multifunction to see the infusion parameters
• 1st parameter: The time left to complete the current dose
• 2nd parameter: The time left to complete the infusion
• 3rd parameter: The total volume infused so far
• 4th parameter: The remaining volume to be infused
• 5th parameter: The volume to be infused in a single dose
• 6th parameter: The dose rate
• 7th parameter: The Keep Vein Open rate
• 8th parameter: The time between doses. Press the DONE multifunction button to navigate to the main display
• Back to main display (INFO option is available again)

Review Infusion Parameters During KVO

Review Infusion Parameters During KVO (Between Doses)

• 1st parameter: The number of doses delivered so far out of the total doses
• 2nd parameter: The time left before the next dose begins
• 3rd parameter: The time left to complete the infusion
• 4th parameter: The total volume infused so far
• 5th parameter: The remaining volume to be infused
• 6th parameter: The volume to be infused in a single dose
• 7th parameter: The dose rate
• 8th parameter: The Keep Vein Open rate.
  • Press the DONE multifunction button to navigate to the main display
• Back to main display (INFO option is available again)

Info: Based on the infusion programming, additional parameters may be displayed. Refer to the User Manual for further information.

Reminder: Next Dose

If the pump was set to remind you when the next dose is due, you will be prompted to resume the infusion manually if the pump was paused between doses:

1. NEXT DOSE IN notification shows how much time is left before the next dose should begin. Press the DISMISS multi-function button
2. DOSE DUE NOW notification is prompted when the next dose is supposed to begin. Press the DISMISS multi-function button
3. Verify the set is connected to the patient
4. Press to resume the infusion

Change the Next Dose Start Time

When the pump is paused Between Doses (during KVO), the time, until the next dose begins, can be shortened

1. Press to pause the infusion
2. Press the EDIT multifunction button to shorten the time remaining until the next dose starts
3. Password entry may be required. Use the + / – keys to set the password and press OK
4. Use the – key to shorten the time remaining for the next dose
5. Press the OK multifunction button to set the selected time
6. Review the edited time, to confirm press CONFIRM to change press EDIT
7. Back to main display (the INFO option is available again) Press to resume

Info: By delivering this dose earlier, all remaining doses will also be delivered earlier.

Time to Change Bag

When the last dose has been delivered in full, the pump prompts you to change bag:

• The pump notifies when the last dose in the bag was delivered

To continue infusion with a NEW BAG:

1. Disconnect set from patient
2. Push down the release latch and remove the used cassette and bag
3. Follow infusion set up
4. Press NEW BAG multi functional button
5. Press YES multi functional button
6. Press to resume the infusion, the dose will be given as scheduled

Info: For safe use, please make sure you complete setup process before moving to step 4.

Change Bag Now

If the bag has not yet been changed yet, and the next scheduled dose is up, the pump prompts to change bag now (immediately):

• The pump notifies when the last dose in the bag was delivered

To continue infusion with a NEW BAG:

1. Disconnect set from patient
2. Push down the release latch and remove the used cassette and bag
3. Follow infusion set up
4. Press NEW BAG multi functional button
5. Press YES multi functional button
6. Press to resume the infusion, the dose will be given immediately

MedNet EC-REP llb GmbH

• Borkstrasse 10
• 48163 Münster, Germany

Eitan Medical Ltd.

• 29 Yad Haruzim St. P.O. Box 8639
• Netanya 4250529, Israel

www.eitanmedical.com

References

• Eitan Medical - Drug Delivery and Infusion Solutions

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>