8BitDo N30 Wireless Charger for Mobile Instruction Manual

8BitDo N30 Wireless Charger for Mobile

Overiew

• once the power is on, the product will be ready to use after the white LED has blinked three times
• the power adapter is not included

Power Supply

• status/LED indicator­
• standby / Fully c harged: white LED turns off
• charging: white LED stays solid
• abnormal charging: white LED blinks

1. for fast and safe charging, using a QC 2.0 or PD3.0 Wall charger is highly recommended. Other power adapters may not work well with this device
2. incompatible phone, power adapter, metal or abnormal temperature may cause abnormal charging

attentions

1. keep the charge away from water or other liquids
2. do not place cards equipped with a magnetic strip or chip (such as ID and ATM cards) close to the charger, as it may cause extreme heat that may burn or damage the device
3. wall charger and USB cable (both support QC2.0 or PD3.0) are required for fast charging.
4. it would not charge if the thickness of phone case is more than 4mm (0.15 inch)
5. turn off the high power-consumption applications to prevent from overheating or slowing down the charging speed
6. if there are medical devices (such as pacemakers, hearing aids, cochlear implants, etc.) nearby, please consult the medical device manufacturer to ensure that they will not cause interference
7. it is recommended for use in temperatures between 0°C and 35°C

FCC regulatory conformance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.

RF Exposure
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

QR SCAN

Support

• please visit support.8bitdo.com for further information & additional support.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>