ACE COMPUTERS W650 Mustang Series Laptop User Guide
- June 12, 2024
- Ace Computers
Table of Contents
- ACE COMPUTERS W650 Mustang Series Laptop
- Product Information
- Disclosures
- INTRODUCTION
- ENEGY STAR AND POWER MANAGEMENT
- ILLUSTRATED SYSTEM DISASSEMBLY/REASSEMBLY INSTRUCTIONS
- System Map
- System Map: Bottom View of W650 Model
- Battery
- Disposal
- Contact Ace Computers Support Desk for help
- Spare Parts List
- PRODUCT TAKE BACK, END OF LIFE PROCESSING, and E-WASTE PROGRAM
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
ACE COMPUTERS W650 Mustang Series Laptop
Product Information
- Product Name : Ace Mustang Series
- Model : W650
- Manufacturer: Ace Computers
- Technical Reference Guide: Provides detailed information about the product and its usage.
Disclosures
Contains important information regarding the accuracy of the manual, changes
to the product, ownership, liability, and dispute resolution.
The information in this User’s Manual has been carefully reviewed and is
believed to be accurate. The vendor assumes no responsibility for any
inaccuracies that may be contained in this document and makes no commitment to
update or to keep current the information in this manual, or to notify any
person or organization of the updates. Please Note: For the most up-to-date
version of this manual, please see our website at www.acecomputers.com.
Ace Computers reserves the right to make changes to the product described in
this manual at any time and without notice. This product, including software
and documentation, is the property of Ace Computers and/ or its licensors, and
is supplied only under a license. Any use or reproduction of this product is
not allowed, except as expressly permitted by the terms of said license.
IN NO EVENT WILL Ace Computers BE LIABLE FOR DIRECT, INDIRECT, SPECIAL,
INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR
INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC. SHALL
NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE
PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING
OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by
the laws of Cook County in the State of Illinois, USA. The State of Illinois,
County of Cook shall be the exclusive venue for the resolution of any such
disputes. Ace Computer’s total liability for all claims will not exceed the
price paid for the hardware product.
The products sold by Ace Computers are not intended for and will not be used
in life support systems, medical equipment, nuclear facilities or systems,
aircraft, aircraft devices, aircraft/emergency communication devices or other
critical systems whose failure to perform be reasonably expected to result in
significant injury or loss of life or catastrophic property damage.
Accordingly, Ace Computers disclaims any and all liability, and should buyer
use or sell such products for use in such ultra-hazardous applications, it
does so entirely at its own risk. Furthermore, buyer agrees to fully
indemnify, defend and hold Ace Computers harmless for and against any and all
claims, demands, actions, litigation, and proceedings of any kind arising out
of or related to such ultra-hazardous use or sale.
Unless you request and receive written permission from Ace Computers, you may
not copy any part of this document. Information in this document is subject to
change without notice. Other products and companies referred to herein are
trademarks or registered trademarks of their respective companies or mark
holders.
Printed in the United States of America.
- Introduction : Targeted towards professional system integrators, PC technicians, and end-of-life recycling facilities. Also includes guidance on energy management settings for end users.
- Resources : Contact information for support and updates to the manual. Product Usage Instructions: 1. Energy Star and Power Management:
- Energy Star Program : The Energy Star program is a set of specifications created by the EPA and DOE to certify residential appliances and construction elements for their energy efficiency.
- Evaluation and Testing: Products such as washers, dryers, refrigerators, freezers, dishwashers, televisions, tablets, computers, monitors, water heaters, HVAC units, dehumidifiers, air cleaners and purifiers, lighting, and insulation must undergo evaluation and testing to meet the Energy Star specifications. Please Note: The above information is a summary of the text-extract from the user manual. For the most accurate and up-to-date information, please refer to the complete user manual available on the Ace Computers website at www.acecomputers.com.
INTRODUCTION
Audience
This manual is mainly written for professional system integrators, PC
technicians, and end of life recycling facilities, with the exception of the
Energy Management Section, which is written to provide additional guidance on
standard energy settings and configurable energy settings for the end user.
Resources
If you have any questions regarding this manual or computer system, please
contact our support team through Ace Computers Support page at
support.acecomputers.com
This manual may be periodically updated without notice. Please check the Ace
Computers website for possible updates to the manual revision level.
ENEGY STAR AND POWER MANAGEMENT
What is Energy Star?
Created by the Environmental Protection Agency (EPA) and the United States
Department of Energy (DOE), the Energy Star program is a strict set of
specifications that residential appliances and construction elements (washers,
dryers, refrigerators, freezers, dishwashers, televisions, tablets, computers,
monitors, water heaters, HVAC units, dehumidifiers, air cleaners and
purifiers, lighting, insulation and more) must meet through evaluation and
testing to achieve certification.
The Energy Star rating assures consumers that the product has been EPA and DOE
certified to function as well or better than its peers, while saving money,
energy and the environment due to its greater energy efficiency.
Benefits of Energy Star
- Increased Efficiency
- Reduced Energy Use
- Reduced Utility Bills
- Reduced Power Plant Emissions and Carbon Footprint
- Wide Selection, Rebates, and Convenience
W650 Power Management Settings “As Shipped”
The default Power Management settings have been selected for compliance with Energy Star and are recommended by the Energy Star program for optimal energy savings.
Power Management Option | Setting |
---|---|
System Sleep Mode | After 30 min. of user inactivity |
Display Sleep Mode | After 10 min. of user inactivity |
Primary Hard Drive – “Hard Disk Turn Off” | 20 min. |
How to wake your computers or monitor from Sleep or Hibernate Mode?
To wake up your computer or monitor from sleep or hibernate, move the mouse or press any key on the keyboard. If this does not work, press the power button to wake up the computer.
Wake Management
- Capable of both remote (via network) and scheduled (via real time clock) wake events from Sleep Mode.
- Provide clients with the ability to centrally manage (via vendor tools) any wake management settings that are configured through hardware settings if the manufacturer has control over such features.
WoL (Wake on LAN)
WoL Capabilities/Default Settings | Yes | No |
---|---|---|
Has the ability to Enable and Disable WoL for Sleep Mode | ||
WoL Enables from Sleep by default: | ||
WoL Enabled from Off by default: |
WoL from Sleep:
WoL from Sleep – Default Settings | Yes | No |
---|---|---|
Shipped Enabled Under All Conditions | ||
Shipped Enabled When Operating on AC power only | ||
Shipped Disabled |
Shipped Disabled with both client OS and Network Controls to Enable
Feature
| |
ILLUSTRATED SYSTEM DISASSEMBLY/REASSEMBLY INSTRUCTIONS
Introduction
This section of the technical reference guide is intended to provide the
following information:
- Information on parts requiring selective treatment per WEEE Directive
- Disassembly process for removal of external enclosure without tools
- Disassembly instructions, including required tools, as applicable
- Diagram and/or pictorial representation of all parts in the system
This section of the user manual is intended to provide guidance to end of life
recyclers on the presence of materials and components that require selective
treatment, per Article 15 of the EU WEEE Directive 2012/19/EU.
The provided information should also help direct recyclers to proper methods
for removing parts and general product disassembly instructions. This Chapter
also outlines specific substances, mixtures, and components that must be
removed from any separately collected electronic waste component and shall be
disposed or recovered in compliance with Directive 2008/98/EC.
Please note: All the illustrations in the below disassembly instructions are
for demonstration only. The system and components shown in this section are a
representative sample.
Replacement Parts
Refer to section “UPGRADES, SERVICE, AND REPAIR” for information on how to
obtain replacement components for your W650.
NOTE: While the components of this computer can be replaced by the end user, Ace Computers does not recommend that an end user without previous computer repair experience perform the upgrades and/or replacement of said components. Computer components are delicate and can easily be damaged. If you are uncertain about replacement or upgrade of your computers, the Ace Computers technical support team does offer “depot” services for on-site system repair and upgrade. Please contact the Ace Computers Technical Support team for additional information and pricing.
CAUTION: Always power off the system and unplug the power cord(s) before
opening the side panel to access the internal components.
ATTENTION: Electrostatic discharge potential. Your computer’s internal
components are highly susceptible to risk of damage from electrostatic
discharge (static electricity, which occurs naturally on your body due to
friction). To avoid damaging your equipment, always earth yourself to your
computer system before opening the computer’s chassis or handling any internal
component(s).
Representative Desktop Component Layout
Please note the illustration below is a representative sample of the W650, your PC may include additional components or variations of this family configuration.
System Map
LCD Panel Open & Top View
System Map: Front & Rear View of W650 Model
Figure 1 – 4 Front View
- Consumer Infrared Transceiver (enabled with optional TV Tuner only)
- LED Power Indicators
- DC-In Jack 4. Vent/Fan Intake
System Map: Left View of W650 Model
Figure 1 – 6 Left View
- Speaker
- DVI-Out Port
- Cable (CATV) Antenna Jack*
- RJ-45 LAN Jack
- HDMI-Out Port
- 2 * USB 3.0 Ports
- eSATA Port
- Mini-IEEE 1394b Port
- HDMI-In Port (Factory Option)
- 9-in-1 Card Reader
- Optical Device Drive Bay
System Map: Right View of W650 Model
Figure 1 – 5 Right View
- Line-In Jack
- S/PDIF-Out Jack
- Microphone-In Jack
- Headphone-In Jack
- 3 * USB 2.0 Ports
- Security Lock Slot
System Map: Bottom View of W650 Model
Figure 1 – 7 Bottom View
- Sub Woofer
- Fan Outlet/Intake
- Component Bay Cover
- Battery (Secondary HDD Bay – HDD3)
- Primary HDD Bay (HDD1 & 2)
W650 Disposal/Selective Treatment
The following section outlines the components of the W650 that required
Selective Treatment/Special Handling Per Annex VII, Directive 2012/19/EU:
The HDD, SSD, Memory, Motherboard, and Optical Drive each contain one printed
circuit board of greater than 10 sq. cm and must be removed from the device
and must be disposed of, or recovered, in compliance with the requirements of
Directive 2008/98/EC.
Any plastic components within the heatsink fan must be removed separately due
to the presence of brominated flame retardants and shall be disposed or
recovered in compliance with Directive 2008/98/EC.
The processor must be disposed of, or recovered, in compliance with the
requirements of Directive 2008/98/EC.
A lithium-ion battery resides on the bottom rear of the laptop. The battery
must be removed separately from the laptop and shall be disposed or recovered
in compliance with Directive 2008/98/EC.
Any external electrical cables must be removed separately and shall be
disposed or recovered in compliance with Directive 2008/98/EC.
The CPU does not contain any WEEE Directive Annex VII materials.
Battery
Handle used batteries carefully. Do not damage the battery in any way; a damaged battery may release hazardous materials into the environment. Do not discard a used battery in the garbage or a public landfill. Please comply with the regulations set up by your local hazardous waste management agency to dispose of your used battery properly.
- Location : The battery is located on the bottom front of the laptop, see illustration below.
- Type and number of fastenings: Interference snap fit
- Tools required: None.
Procedure
- Step 1: Ensure the computer is off, unplugged, and any potential energy is dissipated. Turn the laptop over.
- Step 2: Loosen screws “1”-“3” and carefully lift the battery up.
- Step 3: Remove the battery from the battery bay.
Reinstallation
- Step 4: Turn the computer off, and turn it over.
- Step 5: Slide the battery into the battery bay. Step 6: Insert the 3 screws and fasten.
Disposal
Selective Treatment/ Special Handling Per Annex VII, Directive 2012/19/EU: A lithium-ion battery resides on the bottom rear of the laptop. The battery must be removed separately from the laptop and shall be disposed or recovered in compliance with Directive 2008/98/EC.
External Power Cable
- Location: The inlet to the power cable is located on the I/O panel on the left view of the laptop. Type and number of fastenings: None, direct pressure connection method.
- Tools required: None.
Procedure:
- Step 1: Ensure your computer is powered down.
- Step 2: Disconnect the external power cable from the main laptop assembly.
Reinstallation
- Step 3: Connect the external power cable from the left view of the laptop into the motherboard connection point.
Disposal
Selective Treatment/Special Handling Per Annex VII, Directive 2012/19/EU: Any external electrical cables must be removed separately and shall be disposed or recovered in compliance with Directive 2008/98/EC.
Chassis Bottom Cover Removal
- Location: In order to access the internal components of your system, you will need to remove the bottom cover of the chassis.
- Type and number of fastenings: Eight Phillips head screws
- Tools required: Phillips head screwdriver
Procedure:
- Step 1: Ensure the desktop is off, unplugged, and any potential energy is dissipated.
- Step 2: Unfasten the (8) Phillips screws on the bottom front side rear of the chassis.
- Step 3: Once removed, carefully slide the chassis bottom panel directly upward.
Contact Ace Computers Support Desk for help
Ace Computers staffs a technical support desk and is always ready to help.
- You can contact the team at support@acecomputers.com
- call 877-223-2667
- visit the acecomputers.com and click “Support” to start a new support ticket online.
UPGRADES, SERVICE, AND REPAIR
Replacement and Repair Services are available for a minimum of three years
after date of purchase, and often times if a direct replacement is not
available and upgrade replacement can be found for several years beyond the
initial 3-year mark, ensuring the longest possible utilization of your PC.
Ordering Parts, Requesting Repair, or Talking to Technical Support
The Ace Computers technical support team is ready and available to help in
providing replacement parts, helping to identify compatible upgrades, or to
answer software questions.
Please have your serial number available for reference when contacting Ace
Computers.
You can contact the team at
support@acecomputers.com
call 877-223-2667
visit the support.acecomputers.com site
online.
Spare Parts List
Component Description | Part Number |
---|---|
Laptop | W650 |
External Power Connection Cable | XXXXXXYYY* Power Connection Spare Part |
*Where XXXXXXYYY is the initial 9 characters of the computer serial number.
Spare parts can be purchased by contacting the Ace Computers Technical
Support Team.
PRODUCT TAKE BACK, END OF LIFE PROCESSING, and E-WASTE PROGRAM
Nation Wide Take Back Services
If your PC has reached its end of life or is no longer useable, Ace Computers
is excited to offer a Nation-Wide take back service. We will work with you to
get the product back and will ensure it is proper disposed of with a certified
R2 electronics recycling facility.
Ace Computers has partnered with a local R2-certified electronics waste
recycling facility near our HQ in Des Plaines, IL.
For additional information and steps to take regarding our Product Take-Back,
End-of-Life Processing, and E-Waste Program, please visit our website at
https://acecomputers.com/company/sustainability/ > EPEAT Take-
Back/EOL/E-Waste Program Tab.
REVISION HISTORY
Release Date | Changes |
---|---|
9.13.2022 | Initial Release |
References
- IT Services Company Solutions l Ace Computers
- Support : Ace Computers
- IT Services Company Solutions l Ace Computers
- Sustainability & Quality Commitment | Ace Computers
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>