SONY HTS2000 Sound Bar User Guide

: June 12, 2024
: Sony

Table of Contents

HTS2000 Sound Bar
Mounting the Bar Speaker on a Wall
Precautions
Trademarks
Specifications
Included Items
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

HTS2000 Sound Bar
User Guide

HTS2000 Sound Bar

Before using the unit, be sure to access the following URL and read the End User License Agreement (EULA). The content of the agreement also applies to speakers (available separately) connected to the unit (unless those speakers have a separate license agreement).
https://rd1.sony.net/help/vs/el22/h_zz/
Model: YY2079C
The term “product” in this document refers to the unit or its accessories.
Do not install the product in a confined space, such as a bookcase or built-in cabinet.
To reduce the risk of fire, do not cover the ventilation opening of the unit with newspapers, tablecloths, curtains, etc. Do not expose the unit to naked flame sources (for example, lighted candles).
To reduce the risk of fire or electric shock, do not expose this product to dripping or splashing, and do not place objects filled with liquids, such as vases, on the product.
The AC adaptor is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the unit itself has been turned off.
As the main plug of the AC adaptor is used to disconnect the AC adaptor from the mains, connect it to an easily accessible AC outlet. Should you notice an abnormality in it, disconnect it from the AC outlet immediately.
For Remote Commander
CAUTION
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to local rules and regulations.
Do not expose the batteries (battery pack or batteries installed) to excessive heat, such as sunshine, fire or the like for a long time.
This product (including accessories) has magnet(s) which may interfere with pacemakers, programmable shunt valves for hydrocephalus treatment, or other medical devices. Do not place this product close to persons who use such medical devices. Consult your doctor before using this product if you use any such medical device.
The nameplate and important information concerning safety are displayed on the bottom of the following:

the sound bar
the AC adaptor

This unit has been tested and found to comply with the limits set out in the EMC regulation using a connection cable shorter than 3 m.
The validity of the CE marking is restricted to only those countries/regions where it is legally enforced, mainly in the EEA (European Economic Area) countries/regions and Switzerland.
The validity of the UKCA marking is restricted to only those countries/regions where it is legally enforced, mainly in the UK.
This product has been manufactured by or on behalf of Sony Corporation.
EU and UK Importer: Sony Europe B.V.
Inquiries to the EU Importer or related to product compliance in Europe should be sent to the manufacturer’s authorized representative, Sony Belgium, bijkantoor van Sony Europe B.V., Da Vincilaan 7-D1, 1930 Zaventem, Belgium.
Inquiries to the UK Importer or related to product compliance in the UK should be sent to the manufacturer’s authorized representative, Sony Europe B.V., The Heights, Brooklands, Weybridge, Surrey KT13 0XW, United Kingdom.
About recommended cables
Properly shielded and grounded cables and connectors must be used for connection to host computers and/or peripherals.
Hereby, Sony Corporation declares that this equipment is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address: https://compliance.sony.eu
Hereby, Sony Corporation declares that this equipment is in compliance with the UK relevant statutory requirements.
The full text of the declaration of conformity is available at the following internet address: https://compliance.sony.co.uk
For this radio equipment, the following restrictions on putting into service or of requirements for authorisation of use apply in BE, BG, CZ, DK, DE, EE, IE, EL, ES, FR, HR, IT, CY, LV, LT, LU, HU, MT, NL, AT, PL, PT, RO, SI, SK, FI, SE, UK, IS, LI, NO, CH, AL, BA, MK, MD, RS, ME, XK, TR, UK (NI): 5 150 MHz – 5 350 MHz band is restricted to indoor operations only.

Disposal of waste batteries and electrical and electronic equipment (applicable in the European Union and other countries with separate collection systems)
This symbol on the product, the battery or on the packaging indicates that the product and the battery shall not be treated as household waste. On certain batteries this symbol might be used in combination with a chemical symbol. The chemical symbol for lead (Pb) is added if the battery contains more than 0.004% lead. By ensuring that these products and batteries are disposed of correctly, you will help to prevent potentially negative consequences for the environment and human health which could be caused by inappropriate waste handling. The recycling of the materials will help to conserve natural resources. In case of products that for safety, performance or data integrity reasons require a permanent connection with an incorporated battery, this battery should be replaced by qualified service staff only. To ensure that the battery and the electrical and electronic equipment will be treated properly, hand over these products at end-of-life to the appropriate collection point for the recycling of electrical and electronic equipment. For all other batteries, please view the section on how to remove the battery from the product safely. Hand the battery over to the appropriate collection point for the recycling of waste batteries. For more detailed information about recycling of this product or battery, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product or battery.
This unit should be installed and operated keeping the radiator at least 20 cm away from person’s body.

Mounting the Bar Speaker on a Wall

Note

Prepare screws (not supplied) that are suitable for the wall material and stability. Depending on the wall material, the wall may be damaged.
Fasten the screws securely in the wall beam.
Hang the bar speaker horizontally on the reinforced wall.
Have the installation done by a Sony dealer or licensed contractor and pay special attention to safety during the installation.
Sony shall not be held responsible for accidents or damage caused by improper installation, insufficient wall stability, improper screw installation, natural disasters, etc.
Two or more persons are required to hang the bar speaker for safety.

Prepare two screws (not supplied) that are suitable for the wall mount holes on the rear of the bar speaker.
Align the vertical line above the “ ① TV CENTER LINE” printed on the WALL MOUNT TEMPLATE (supplied) with the center of the width of your TV.
Align the “ ② TV BOTTOM LINE” printed on the WALL MOUNT TEMPLATE with the bottom of your TV, then adhere the WALL MOUNT TEMPLATE on the wall with a commercially available adhesive tape, etc.
Fasten the screws prepared in step 1 securely into the screw marks on the “ ③ SCREW LINE” printed on the WALL MOUNT TEMPLATE.
Remove the WALL MOUNT TEMPLATE.
Connect cables to the bar speaker.
① Connect the HDMI cable (supplied) to the HDMI OUT (TV (eARC/ARC)) jack on the bar speaker.
② Connect the AC adaptor (supplied) to the DC IN terminal on the bar speaker and then the AC power cord (mains lead) (supplied) to the AC adaptor. Note
• If your TV is not compatible with eARC or ARC, connect the optical digital cable (not supplied) besides the HDMI cable (supplied).
• For TV connections, refer to Help Guide.
Hang the bar speaker on the screws.
Align the holes of the rear of the bar speaker with the screws, then hang the bar speaker on the two screws. Note
• When adhering the WALL MOUNT TEMPLATE on the wall, smooth it out fully.
• Install the bar speaker apart from the TV by 70 mm or more.
Connect the HDMI cable (supplied) to the HDMI IN jack on the TV.
Connect the AC power cord (mains lead) connected with the bar speaker to the AC outlet (mains).

Licenses

Dolby, Dolby Atmos, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.
Manufactured under license from Dolby Laboratories. Confidential unpublished works. Copyright © 1992–2021 Dolby Laboratories. All rights reserved.
For DTS patents, see http://patents.dts.com.
Manufactured under license from DTS, Inc. DTS, DTS:X, and the DTS:X logo are registered trademarks or trademarks of DTS, Inc. in the United States and other countries. © 2022 DTS, Inc. ALL RIGHTS RESERVED.
This product is protected by certain intellectual property rights of Microsoft Corporation. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft or an authorized Microsoft subsidiary.
This product contains software that Sony uses under a licensing agreement with the owner of its copyright. We are obligated to announce the contents of the agreement to customers under requirement by the owner of copyright for the software. Please access the following URL and read the contents of the license. https://rd1.sony.net/help/ht/sl/v1/23/
The software included in this product contains copyrighted software that is licensed under the GPL/LGPL and other licenses which may require access to source code. You may find a copy of the relevant source code as required under the GPL/LGPL (and other licenses) at the following URL.
You may obtain the source code as required by the GPL/LGPL on a physical medium from us for a period of three years after our last shipment of this product by applying through the form at the following URL.
This offer is valid to anyone in receipt of this information.
https://oss.sony.net/Products/Linux/
Please note that Sony cannot answer or respond to any inquiries regarding the content of this source code.

Disclaimer regarding services offered by third parties

Services offered by third parties may be changed, suspended, or terminated without prior notice. Sony does not bear any responsibility in these sorts of situations.

Precautions

Before operating the unit, check that the operating voltage is identical to your local power supply. The operating voltage is indicated on the nameplate on the bottom of the unit.
The supplied AC adaptor is designed exclusively for this unit. It should not be used in combination with any other devices.
Completely disconnect the AC power cord (mains lead) from the AC outlet (mains) if it is not going to be used for an extended period of time. When unplugging the AC power cord (mains lead), always grip the plug. Never pull the cord itself.
AC power cord (mains lead) must be changed only at a qualified service shop.

On placement

Should any solid object or liquid fall into the unit, unplug the unit and have it checked by qualified personnel before operating it any further.
Do not place the unit near heat sources or in a place subject to direct sunlight, excessive dust, or mechanical shock.
The speakers of this unit are not of magnetically shielded type. Do not place magnetic cards on the unit or near it.
Do not place metal objects other than a TV around the unit. Wireless functions may be unstable.
Although the unit heats up during operation, this is not a malfunction.
Place the unit in a location with adequate ventilation to prevent heat buildup and prolong the life of the unit.
Use caution when placing the unit on a surface that has been specially treated (with wax, oil, polish, etc.), as staining or discoloration of the surface may result.

How to care for the unit

Clean the unit with a soft, dry cloth. Do not use any type of abrasive pad, scouring powder, or solvent such as alcohol or benzine.

On BLUETOOTH® communications

Microwaves emitting from a BLUETOOTH device may affect the operation of electronic medical devices. Turn off this unit and other BLUETOOTH devices in the following locations, as it may cause an accident:
– in hospitals, near priority seating in trains, locations where inflammable gas is present, near automatic doors, or near fire alarms.

Turning the BLUETOOTH and Wireless LAN functions on/off

Touch and hold (Input) and (BLUETOOTH) on the unit for about 5 seconds to turn off the BLUETOOTH and Wireless LAN functions. [BT POWER] appears on the front panel display and then [OFF] appears.
Touch and hold (Input) and (BLUETOOTH) on the unit again for about 5 seconds to turn on the BLUETOOTH and Wireless LAN functions. [BT POWER] appears on the front panel display and then [ON] appears.

Other notes

Deactivating the [Auto Standby] function will increase the energy consumption of the product.
When connecting the unit to the Internet, use the router (ADSL modem or optical line termination device with the router function supplied with the Internet provider, or Wi-Fi access point). If you connect to the Internet without using the router, a security problem may occur. If you are not sure that the wall outlet for the network line has the router function, ask your manager of the apartment house or Internet provider.
If you have any questions or problems concerning this unit that are not covered in this manual, please consult your nearest Sony dealer.

Trademarks

Windows Media is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.
The BLUETOOTH® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Sony Group Corporation and its subsidiaries is under license.
The terms HDMI™, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

All other trademarks and registered trademarks are trademarks or registered trademarks of their respective holders. In this manual, TM and ® marks are not specified.

Specifications

Sound Bar (HT-S2000)
Amplifier section
POWER OUTPUT (rated)
Front L + Front R speaker blocks: 37 W + 37 W (at 6 ohms, 1 kHz 1 %THD)
Center speaker blocks: 37 W (at 6 ohms, 1 kHz 1 %THD)
Subwoofer blocks: 37 W + 37 W (at 6 ohms, 100 Hz 1 %THD)
POWER OUTPUT (reference)
Front L/Front R speaker blocks: 50 W (per channel at 6 ohms, 1 kHz)
Center speaker blocks: 50 W (at 6 ohms, 1 kHz)
Subwoofer blocks: 50 W (per channel at 6 ohms, 100 Hz)
HDMI Section
Connector
Type A (19pin)
USB section (For service use only)
FOR SERVICE port
Type A (For connecting USB memory)
Wireless LAN section
Communication system
IEEE 802.11 a/b/g/n/ac
Frequency band
2.4 GHz, 5 GHz
BLUETOOTH section
Communication system
BLUETOOTH Specification version 5.2
Frequency band
2.4 GHz band (2.400 0 GHz – 2.483 5 GHz)
General
Power requirements
DC 25 V (using the supplied AC adaptor connected to AC 100 V – 240 V, 50 Hz/60 Hz power supply)
Power consumption
On: 42.0 W
[Network/Bluetooth Standby] is set to ON: Less than 2.0 W
[Network/Bluetooth Standby] is set to OFF: Less than 0.5 W
The product has a router function which can forward audio data via Wi-Fi to another Sony audio product.
Dimensions* (approx.) (w/h/d)
800 mm × 64 mm × 124 mm

Not including projection portion
Mass (approx.)
3.7 kg
AC adaptor
Manufacturer’s name or trade mark: Sony Corporation
Commercial registration number: 7010401045660
Address: 1-7-1 Konan, Minato-ku, Tokyo, 108-0075 Japan
Model identifier: AC-509C
Input voltage: 100 – 240 V
Input AC frequency: 50/60 Hz
Output voltage – Output current – Output power: 25.0 Vdc – 2.0 A – 50.0 W
Average active efficiency: 88.0 %
Efficiency at low load (10 %): 79.0 %
No-load power consumption: 0.21 W
Wireless Transmitter/Receiver Section
Communication system
Wireless Sound Specification version 4.0
Frequency band
5 GHz

Included Items

Sound Bar (1)
Remote control (1)
R03 (size AAA) battery (2)
WALL MOUNT TEMPLATE (1)
HDMI cable (supports the specification equal to High Speed HDMI Cable with Ethernet) (1)
AC adaptor (1), AC power cord (mains lead) (1)
Reference Guide (This manual)

Design and specifications are subject to change without notice.
Radio Frequency Bands and Maximum Output Power

| Frequency band| Maximum output power
---|---|---
BLUETOOTH| 2 400 – 2 483.5 MHz| < 9.9 dBm
Wireless LAN| 2 400 – 2 483.5 MHz| < 19.99 dBm
5 150 – 5 250 MHz| < 22.99 dBm
5 250 – 5 350 MHz| < 19.99 dBm
5 470 – 5 725 MHz| < 19.99 dBm
5 725 – 5 850 MHz| < 13.98 dBm
Wireless Speaker| 5 150 – 5 250 MHz| < 22.99 dBm
5 250 – 5 350 MHz| < 19.99 dBm
5 470 – 5 600 MHz| < 19.99 dBm
5 650 – 5 725 MHz| < 19.99 dBm
5 725 – 5 850 MHz| < 13.98 dBm

SONY HTS2000 Sound Bar - Qr Code https://rd1.sony.net/help/ht/2079/h_zz/?cid=qr0im000