ZINWELL PLM-9702-HN G.hn Over Phone Line Ethernet Bridge Installation Guide
- June 12, 2024
- ZINWELL
Table of Contents
ZINWELL PLM-9702-HN G.hn Over Phone Line Ethernet Bridge
Product Information
| Brand | ZINWELL |
|---|---|
| Model | PLM-9702-HN |
| Description | G.hn over Phone Line Ethernet Bridge |
| Hardware Installation Guide | p.n.909904 |
OVERVIEW
LED INDICATORS
HARDWARE INSTALLATION
- Step 1: Plug a G.hn over Phone Line Ethernet Bridge into an AC outlet using the AC adapter provided. Use a phone-line cable to connect its G.hn Link connector to a wall’s phone jack. Then use an Ethernet cable to connect the Bridge to a router or modem.
- Step 2: Plug another G.hn over Phone Line Ethernet Bridge into another AC outlet using the AC adapter provided. Use a phone-line cable to connect its G.hn Link connector to the wall’s phone jack. Then use an Ethernet cable to connect it to any network device such as a streaming box, smart TV, or gaming console.
PAIRING TWO BRIDGES
Users can easily create a G.hn network—simply press the Pairing buttons on the
Bridges in the proper order to “pair” them together. To set up the network,
follow the steps below:
- Step 1: Verify the Power LED initial state on both Bridges is solid green. The G.hn Link LED is off when a G.hn over Phone Line Ethernet Bridge does not have a secured link to a G.hn network.
- Step 2: Press and hold the Pairing button on Bridge A for 3 seconds (refer to the image above) until its G.hn Link LED starts blinking amber.
- Step 3: Press and hold the Pairing button on Bridge B for 3 seconds until its G.hn Link LED starts blinking amber.
- Step 4: When a Bridge has paired to a network, its Power LED will be solid amber.
Note: The G.hn LED of Bridge A will continue to blink for approx. 120 seconds. During that time, you may add more bridges to the network by repeating Steps 1–4 above.
UN-PAIRING/REMOVING A DEVICE FROM THE G.hn NETWORK
- Step 1: Press and hold the Reset button (inside the pinhole) of the unit for 15 seconds until all of its LEDs turn off for 0.5 seconds and then turn back on.
- Step 2: The G.hn Link LED will then blink once in amber, then turn off.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>