BRAUN Series 7 7085cc Electric Razor for Men User Manual
- June 12, 2024
- Braun
Table of Contents
Series 7
Type 5694
www.braun.com
720s-6
0800 783 7010
Series 7 7085cc Electric Razor for Men
Our products are designed to meet the highest standards of quality,
functionality and design. We hope you enjoy your new Braun Shaver.
Warning
Your shaver is provided with a special cord set, which has an integrated
Safety Extra Low Voltage power supply. Do not exchange or tamper with any part
of it, otherwise there is risk of electric shock.
Do not shave with a damaged foil or cord.
This appliance is not intended for use by children or persons with reduced
physical or mental capabilities, unless they are supervised by a person
responsible for their safety. In general, we recommend that you keep the
appliance out of reach of children. Children should be supervised to ensure
that they do not play with the appliance.
Oil bottle
Keep out of reach of children. Do not swallow. Do not apply to eyes.
Dispose of properly when empty.
Description
- Foil & Cutter cassette
- Cassette release button
- Shaver head «lock» switch
- Pop-out long hair trimmer
- On/off switch
- (-) setting button (sensitive)
- (+) setting button (intensive)
- Reset button
- Shaver display
- Shaver power socket
- Travel case
- Special cord set
Charging
The best environmental temperature for charging is between 5 °C and 35 °C.
- Using the special cord set 12, connect the shaver to an electrical outlet with the motor switched off and charge it for at least one hour.
- A full charge provides up to 50 minutes of cordless shaving time. This may vary according to your beard growth.
- If the rechargeable battery has run out of power (discharged), you may also shave by connecting the shaver to an electrical outlet via the special cord set.
Shaver display 9
The green indicator flashes when the shaver is being charged or when in use.
When the battery is fully charged, the charge segment will light up
continuously provided that the shaver is switched on or connected to an
electrical outlet.
Some minutes after completing the charging, the shaver switches to the stand-
by-mode:
The display turns off.
The red indicator flashes when the battery capacity has dropped below 20%,
provided the shaver is switched on. The remaining capacity will then be
sufficient for 2 to 3 shaves.
Personalizing your shaver
Personalizing your shaver
With the (-) 6 and (+) 7 buttons you can choose the best setting for shaving
different areas of your face and as per your specific needs. The different
settings are indicated by the pilot light incorporated in the on/off switch 5:
- dark blue (powerful shave)
- light blue (normal)
- white (for a thorough comfortable shave in sensitive areas of your face such as neck)
For a thorough and fast shave we recommend the (+) setting.
When switching on next time, the last used setting will be activated.
How to use
Press the on/off switch 5 to operate the shaver:
- The pivoting shaver head and floating foils automatically adjust to every contour of your face.
- To shave hard to reach areas (e.g. under the nose) slide the shaver head «lock» switch 3 to the back position to lock the pivoting head at an angle.
- To trim sideburns, moustache or beard, slide the pop-out long hair trimmer 4 upwards.
Tips for the perfect shave
For best shaving results, Braun recommends you to follow 3 simple steps:
- Always shave before washing your face.
- At all times, hold the shaver at right angles (90°) to your skin.
- Stretch your skin and shave against the direction of your beard growth.
Cleaning
The shaver head is suitable for cleaning under running tap water.
Warning: Detach the shaver from the power supply before cleaning the
shaver head in water.
Regular cleaning ensures better shaving performance. Rinsing the shaving head under running water after each shave is an easy and fast way to keep it clean:
-
Switch the shaver on (cordless) and rinse the shaving head under hot running water.
You may use liquid soap without abrasive substances. Rinse off all foam and let the shaver run for a few more seconds. -
Next, switch off the shaver, press the release button 2 to remove the Foil & Cutter cassette 1 and let it dry.
If you regularly clean the shaver under water, then once a week apply a drop of light machine oil on top of the Foil & Cutter cassette.
Alternatively, you may clean the shaver using the brush provided:
- Switch off the shaver. Remove the Foil & Cutter cassette 1 and tap it out on a flat surface.
- Using the brush, clean the inner area of the pivoting head. However, do not clean the foil and cutter cassette with the brush as this may damage it.
Keeping your shaver in top shape
Replacing the Foil & Cutter cassette/reset
To maintain 100% shaving performance, replace the Foil & Cutter cassette 1,
when the replacement symbol lights up on the shaver display 9 (after about 18
months) or when cassette is worn.
The replacement symbol will remind you during the next 7 shaves to replace the
Foil & Cutter cassette. Then the shaver will automatically reset the display.
After you have replaced the Foil & Cutter cassette, use a ball-pen to push the
reset button for at least 3 seconds to reset the counter.
While doing so, the replacement light blinks and goes off when the reset is
complete. The manual reset can be done at any time.
Accessories
Available at your dealer or Braun Service Centers:
Foil & Cutter cassette 70S 
Environmental notice
This product contains rechargeable batteries. In the interest of protecting
the environment, please do not dispose of the ‘y product in household waste at
the end of its useful life. Disposal can take place at a Braun Service Centre
or at appropriate collection points provided in your country.
Subject to change without notice.
For electric specifications, see printing on the special cord set.
Guarantee
We grant a 2 year guarantee on the product commencing on the date of purchase.
Within the guarantee period we will eliminate any defects in the appliance
resulting from faults in materials or workmanship, free of charge either by
repairing or replacing the complete appliance at our discretion.
This guarantee extends to every country where this appliance is supplied by
Braun or its appointed distributor.
This guarantee does not cover: damage due to improper use, normal wear and
tear (e.g. shaver foil or cutter block) as well as defects that have a
negligible effect on the value or operation of the appliance. The guarantee
becomes void if repairs are undertaken by unauthorised persons and if original
Braun parts are not used.
To obtain service within the guarantee period, hand in or send the complete
appliance with your sales receipt to an authorised Braun
Customer Service Centre (address information available online at
www.service.braun.com).
For UK only:
This guarantee in no way affects your rights under statutory law.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>