WINNCARE Luna Ceiling Hoist User Guide
- June 12, 2024
- WINNCARE
Table of Contents
**WINNCARE Luna Ceiling Hoist User Guide
**
Product Overview
100%
50 %.
MUST BE CHARGED
Reset
If the RESET button flashes: Press RESET down for 5 seconds, and the lift
works again.
After pressing the red STOP button, Reset must be pressed down for 5 seconds, in order to re-activate the hand control.
Use if Lift up / Lift down isn’t working; Press down the parachute button
during lowering, which will start after 5 seconds.
You will hear a constant ”beep” when pressing down the parachute button.
The hand control must always be connected in order for the lift to function.
If the electrical powered emergency lowering is not working, use the manual emergency lowering:
- Take the key from the top of the charger.
- Remove the hand control.
- Remove the plug on the side of the Luna.
- Put the key into the Luna.
- Turn the key counter clockwise to lower the user.
Scan the QR code for further information
Symbols
Documents / Resources
|
WINNCARE Luna Ceiling
Hoist
[pdf] User Guide
Luna Ceiling Hoist, Hoist, Luna Hoist, Ceiling Hoist
---|---