LECTRO VL-2i1TWS Wireless Earbuds Owner’s Manual
- June 12, 2024
- LECTRO
Table of Contents
**LECTRO VL-2i1TWS Wireless Earbuds Owner’s Manual
**
TWS Function
| Function | Left | Right |
|---|---|---|
| Pairing | Take out two earbuds, power on and two earbuds pairing automatically. | |
| Connect |
- Turn on your phone’s BT, searching pairing name: TWS HEADSET.
- Click the pairing name “TWS HEADSET” to connect
- Two earbuds will be connected to your phone automatically when taking out earbuds from charging case on second time.
- If cannot connect your phone, do again with operation 1 and 2.
**** Disconnect| Take out two earbuds from charging case,If still not connect
your phone, two earbuds be power off automatically after 5 mins.
Volume| Control by phone| Control by phone
Music| Press twice quickly: Next track| Press three times quickly: Last track
Voice Prompt| Long press 1.5s| Long press 1.5s
Play/Pause| Short press| Short press
Answer| Short press| Short press
Reject| Long press| Long press
Power Off| Put two earbuds back to charging case, they will be power off
automatically.
Indicator light for charging case
Fully battery| The white light flash slowly when charging, white light bright
when the battery is full.
---|---
Charging|
- Charging voltage is 5V, charging time is around 2 hours, please do not overcharge.
- If no use for a long time, please charge earbuds one time each month, which can prolong the life of earbuds.
Description
- Wireless Version: V5.2+EDR
- Transmission range : ≤10M
- Frequency: 20HZ-20KHZ
- Battery: 28 mAh/each earbud
- Charging Case: 1500 mAh
DECLARATION OF CONFORMITY
Confinity NV, Dorp 16, 9830, Sint-Martens-Latem, Belgium
declares the following device in sole responsibility:
Brand name: Vlectro
Product type : 2 in 1 TWS headset
Item number: VL-2i1TWS
Complies with the following harmonization rules:
EN 62479 : 2010
ETSI EN 300328 V2.2.2 (2019-07)
ETSI EN 301 489-1 V2.2.3 (2019-11)
ETSI EN 301 489-17 V3.2.4 (2020-09)
EN IEC 62368-1 : 2020+A11 : 2020
Signed for and on behalf of:
Sint-Martens-Latem, Belgium – MAY 2022
A. Pappijn – Product Manager
