MTSIM Monitor Triple Extension Instruction Manual
- June 12, 2024
- MTS
Table of Contents
MTSIM Monitor Triple Extension
Product Information
The MTS Monitor Top Extension is a versatile accessory designed to enhance your monitor setup. It allows you to adjust the angle and height of your monitor for optimal viewing comfort. The extension is compatible with VESA mounts, making it suitable for a wide range of monitors.
Parts Included
- 2x Universal Connector
- 6x Cap
- 4x Slot Nut (M6)
- 2x Slot Nut (M8)
- 2x M6x16 Screws (black)
- 2x M8x30 Screws
Assembly
- Take the two pre-assembled universal connectors and attach them to both sides of the extension, using the provided slot nuts (M6) and screws (M6x16 black).
- Loosely assemble the two slot nuts (M8) onto the extension.
- Attach the extension to your monitor using the VESA mount, using the provided screws (M8x30).
Usage Instructions
To adjust the angle and height of your monitor:
- Locate the yellow marked screws on both sides of the extension and loosen them.
- Adjust the angle and height of the monitor as desired.
- Tighten the screws to secure the new position.
To change the position of the VESA mount:
- Loosen the screws that secure the VESA mount.
- Move the VESA mount to the desired position.
- Tighten the screws to secure the new position.
Note: For any further assistance or troubleshooting, refer to the MTS Monitor Top Extension Manual.
PARTS
- BAG 1
BAG 2
ASSEMBLY INSTALLATION
HOW TO FIX
- Loosen the yellow marked screws on both sides to adjust angle and height.
- Loosen these screws to change the position of the VESA mount.
- Loosen these screws to change the height.
HOW TO USE
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>